QS * Mac OS 10.6 SL * Cut & Past (Moving Objects) trigger

[Miguel Esteves]

Hi,

1) Before Mac OS 10.6 SL
-No problem with QS Moving Objects trigger

2) Now with 10.6 SL and with QS 56a7 (3825)
-Problem with Moving Objects trigger (nothing happens)...

Any solution?

[Jon Stovell (a.k.a. Sesquipedalian)]

Well, you'll need to give us some more information first. What exactly
is the content of the action you are trying to run, and will it work
if you run it through the command window instead of as a trigger?

But in any case, your first step will be to install b57 from
http://github.com/tiennou/blacktree-alchemy/downloads

On Dec 5, 9:12 am, Miguel Esteves <thinkitbuilditbitby...@gmail.com>
wrote:

[weltact]

ive got the same problem
and its not even snow leaopard
im using 10.5.8
quicksilver b56a7 (3825)

i read this
http://www.macosxhints.com/article.php?story=20081112153330648

it says you should select "current selection" for the first tab
but if i do that it doesnt give me "move to" option to select in the
second tab

if i put "finder selection" in the first tab (which someone suggested
on that page"
then the quicksilver window pops up and lets me select where to move
to
but after pressing enter it doesnt do anything (it doesnt cut the
files, and it doesnt paste them)

any ideas ?

thanks

[Miguel Esteves]

Well,

lets try. I select one or more files from Finder... I use the
combination of ctrl+cmd+M (to evoke QS trigger)... QS opens the dialog
box (subject+action+object) to allow me to choose the destination
folder... I confirm the operation... and the nothing happens...

I recall you that before Mac OS 10.6 SL everything was working fine...





On Dec 5, 8:13 pm, "Jon Stovell (a.k.a. Sesquipedalian)"

<jonstov...@gmail.com> wrote:
> Well, you'll need to give us some more information first. What exactly
> is the content of the action you are trying to run, and will it work
> if you run it through the command window instead of as a trigger?
>

> But in any case, your first step will be to install b57 fromhttp://github.com/tiennou/blacktree-alchemy/downloads

>
> On Dec 5, 9:12 am, Miguel Esteves <thinkitbuilditbitby...@gmail.com>
> wrote:
>
>
>
> > Hi,
>
> > 1) Before Mac OS 10.6 SL

> >     -No problem withQSMoving Objects trigger
>
> > 2) Now with 10.6 SL and withQS56a7 (3825)

[Jon Stovell]

ctrl+cmd+M (to evoke QS trigger)

Yes, but what is the actual content of the action that this trigger is set to perform? Open Quicksilver's preferences, go to the Triggers section, and tap on the problematic trigger. It will pop up with a dialog box that looks similar to this:

Please describe exactly what appears in each of the three boxes, using the following pattern:

Item: Clipboard History

Action: Show

Target:

(Obviously, replace Clipboard History, Show, and the blank space with the corresponding terms in your trigger)

[Miguel Esteves]

Now, I installed the quicksilver b56a7 (3825) and the problem is not
solved!

Select an item: Current Selection
Action: move to...
Target: (empty)

Command: Move Current Select to

On Dec 8 2009, 8:26 am, Jon Stovell <jonstov...@gmail.com> wrote:
> > ctrl+cmd+M (to evoke QS trigger)
>
> Yes, but what is the actual content of the action that this trigger is set to perform? Open Quicksilver's preferences, go to the Triggers section, and tap on the problematic trigger. It will pop up with a dialog box that looks similar to this:
>

> Please describe exactly what appears in each of the three boxes, using the following pattern:
>
> Item: Clipboard History
> Action: Show
> Target:
>
> (Obviously, replace Clipboard History, Show, and the blank space with the corresponding terms in your trigger)
>

>  PastedGraphic-1.tiff
> 431KViewDownload

[Miguel Esteves]

Pardon... b57

On Feb 3, 7:22 pm, Miguel Esteves <thinkitbuilditbitby...@gmail.com>
wrote: