Connection ESA/900 with RISC/600
Taisir Jawbearh
DOSE ANYONE KNOW WHAT SYSTEM REQUIREMNTS NEED TO GET CONNECTION
RISC/6000 TO GET CONNECTED WITH WITH ESA/9000 , WHAT SOTWARE & HARDWARE
NEEDED ON THE MAINFRAME ESA/9000
IF ANYONE HASE ANY IDEAS, PLEASE LET ME KNOW
TIA
REGARDS
TAISIR JAWBERAH
Christian Kuhtz
> RISC/6000 TO GET CONNECTED WITH WITH ESA/9000 , WHAT SOTWARE & HARDWARE
> NEEDED ON THE MAINFRAME ESA/9000
> IF ANYONE HASE ANY IDEAS, PLEASE LET ME KNOW
Call your IBM rep. :)
Best Regards,
Chris
--
Christian Kuhtz, currently @: #import "I/speak/for_myself.h"
Advantis, IBM Global Network office: (914) 684-4467
Network Applications Security fax: (914) 684-3791
White Plains, NY Pencom Systems Administration
c...@ims.advantis.com c...@psa.pencom.com (permanent)
SrA Clarence M. Eakle
> DOSE ANYONE KNOW WHAT SYSTEM REQUIREMNTS NEED TO GET CONNECTION
> RISC/6000 TO GET CONNECTED WITH WITH ESA/9000 , WHAT SOTWARE & HARDWARE
> NEEDED ON THE MAINFRAME ESA/9000
> IF ANYONE HASE ANY IDEAS, PLEASE LET ME KNOW
Well, we have been trying to do something similar using a channel adapter
card in a RS/6000-340. We have been working with IBM for about 6 months
and have yet to make a successful connection. My advice to you would be
to either hire a contractor and let them deal with IBM or find a vendor
other than IBM to buy the needed equipment (hardware and software). This
has not been a good experience with IBM, but that is a given when you are
dealing with them. Good luck.
Matt Eakle
Michael A. Short
>Hello
>
> DOSE ANYONE KNOW WHAT SYSTEM REQUIREMNTS NEED TO GET CONNECTION
>RISC/6000 TO GET CONNECTED WITH WITH ESA/9000 , WHAT SOTWARE & HARDWARE
>NEEDED ON THE MAINFRAME ESA/9000
>IF ANYONE HASE ANY IDEAS, PLEASE LET ME KNOW
>
adapter for the RS/6000. You need to purchase the adaptor, a cable, and
some software. You should have a spare channel available on the 9000.
Check with your sales rep for the feature codes; I don't have them readily
at hand.
>TIA
>REGARDS
>TAISIR JAWBERAH
Laurent Dullaart
>
> > DOSE ANYONE KNOW WHAT SYSTEM REQUIREMNTS NEED TO GET CONNECTION
> > RISC/6000 TO GET CONNECTED WITH WITH ESA/9000 , WHAT SOTWARE & HARDWARE
> > NEEDED ON THE MAINFRAME ESA/9000
> > IF ANYONE HASE ANY IDEAS, PLEASE LET ME KNOW
>
>
> Best Regards,
> Chris
>
> --
> Christian Kuhtz, currently @: #import "I/speak/for_myself.h"
> Advantis, IBM Global Network office: (914) 684-4467
> Network Applications Security fax: (914) 684-3791
> White Plains, NY Pencom Systems Administration
> c...@ims.advantis.com c...@psa.pencom.com (permanent)
You can connect it any way you like. We use it over a nice token-ring
lan that als supports our PC as 3270-emulators.
As software you'll need sna server (or was it sna services?). It
supports 3270 and lu 6.2.
If you really want to play, you might try xcom for file transfer,
CICS/6000 to CICS esa communications etc.
David Johnson
had the software AND the drivers. We get very good response (much better
than talking through NCP route or with a TCP/IP route through our 3745
which is what we had been using.
IBM was very good at helping to install it and it works very well.
Dave Johnson
Missouri Highway and Transportation Department
PO Box 270
Jefferson City, MO 65102
(314)751-9201
Alvaro Barcellos
Try both whit Ethernet cards .... an piece of cable ... and patience...
----------------------------*
Alvaro Barcellos OveR flAT lAND, An orBIT flOwS
a...@brcprm.bitnet
----------------------------*
OPCRARN1.JMOMANY
From: Momanyi, Justus X6024
To: AIXL1
Subject: Re: Connection ESA/900 with RISC/600
Date: 1995-09-01 18:01
Priority:
Message ID: DADC5057
Conversation ID: DADC5057
------------------------------------------------------------------------------
You can't be serious!
how the hell are the two machines going to communicate
buy a clue!
J-man