AVR USB Dev Boards @ £2.50 each

[Rev Dave (Team Robomods - BuildBrighton)]

Hi All,

On the London Hackspace Group Board i saw these AVR USB Dev Boards at
£2.50 each if you buy 100+

http://www.modtraders.co.uk/minimus-avr-usb-development-board.html

"Basically it's an Atmel AT90USB162 on a PCB with a 16MHz crystal, a
RESET and HWB button, a couple of LEDs and a USB type A plug. The
microcontroller has 16KiB of flash (12KiB if you want to keep the
factory-programmed USB bootloader intact), 512 bytes of RAM, 512 bytes
of EEPROM, a Full-Speed (12Mbit/s) device-only USB peripheral with 176
bytes of endpoint FIFO space, an analog comparator, a couple of
timers, a UART, a master/slave SPI, 21 I/Os and an on-chip 3.3v
regulator. With a bit of hackery you can get it to work at +5v or
+3.3v, taking power either from an external source or from the USB
bus. The I/Os are brought out to a 0.1"-pitch DIL arrangement, so it's
great for prototyping."

I was thinking of buying 5 personally for AVR workshops etc and i have
still have 70 preordered , anybody
else interested in buying any so we can combine orders and all
benefit?

Rev Dave