Embedded Systems Conference image bad?
David Hagood
flashing Angstrom into the Beagleboard flash as demonstrated at the
Embedded Systems Conference in Boston, but I cannot get it to work.
I am pulling the images from here: http://beagleboard.org/demo/esc
After building the SD card as per the instructions, booting it, and
typing "yes<CR>" on the console, I get the following on 2 different
Beagleboards, including the one I successfully flashed in Boston.
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
JFFS2 notice: (1626) jffs2_build_xattr_subsystem: complete building
xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0
dead, 0 orphan) found.
mtd->read(0xd10 bytes from 0xf940d54) returned ECC error
Data CRC f92468f3 != calculated CRC 62773783 for node at 0f940d10
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c78b8000
[00000000] *pgd=878bc031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1]
Modules linked in: ipv6
CPU: 0 Not tainted (2.6.27-rc7-omap1 #1)
PC is at jffs2_write_end+0x4c/0x2d8
LR is at generic_file_buffered_write+0x190/0x62c
pc : [<c013f2f4>] lr : [<c007ddd4>] psr: 60000013
sp : c5575cd8 ip : c5575d38 fp : c5575d34
r10: c0489800 r9 : 00000000 r8 : c7597b70
r7 : c789b000 r6 : 00000000 r5 : 00001000 r4 : 00001000
r3 : 00000000 r2 : c794e600 r1 : 00000000 r0 : 00002000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 878b8018 DAC: 00000015
Process cp (pid: 1630, stack limit = 0xc55742e8)
Stack: (0xc5575cd8 to 0xc5576000)
5cc0: 00002000
00000000
5ce0: c5575d04 c0442cf4 00001000 00000000 00002000 00000000 c0489800
00001000
5d00: 00002000 00000000 00001000 00001000 00001000 00000000 c5574000
00002000
5d20: 00000000 c5575d80 c5575dc4 c5575d38 c007ddd4 c013f2b4 00001000
00001000
5d40: c0489800 c00b28c4 c7597c1c c5575e90 c2556ba0 c7597c1c c032d404
c7597b70
5d60: 00000000 00001000 00000000 c032d404 48852764 13aa43a1 c00b5b8c
c5575d98
5d80: c5575f20 00000001 00000000 00001000 c00b28c4 c0489800 48852764
c7597be4
5da0: c5575e90 00002000 00000000 00001000 c5575f20 c7597b70 c5575e44
c5575dc8
5dc0: c007e8dc c007dc50 00002000 00000000 c5575ee0 00001000 00000000
00000000
5de0: c0489d80 c5575ee0 c5575e90 c2556ba0 c7597c1c 00000000 c031f440
00000001
5e00: c7597be4 22222222 22222222 22222222 22222222 00001000 c7597be4
c7597be4
5e20: c5575e90 c5575f20 c7597b70 00002000 00000000 00000001 c5575e84
c5575e48
5e40: c007e9a4 c007e4c0 00000000 beca1a90 c2556ba0 c7597c1c 00000000
c5575e90
5e60: c2556ba0 c5575f70 00001000 beca0a90 c5574000 00000004 c5575f44
c5575e88
5e80: c009eb10 c007e93c 00002000 00000000 c78bafb0 c78bea80 00000000
00000001
5ea0: ffffffff c2556ba0 00000000 00000000 00000000 00000000 c7919660
c5575ec8
5ec0: 00000000 00000000 00000022 c7919660 c00667cc c5575ed4 c5575ed4
c041a0b8
5ee0: 00002000 00000000 beca0a8c beca1f16 00000002 00000004 00001000
c5575f08
5f00: c00331e8 c0039070 c78b9000 00000000 00000000 c74dc198 c7814500
00000001
5f20: beca0a90 00001000 00001000 c2556ba0 beca0a90 c5575f70 c5575f6c
c5575f48
5f40: c009f3f0 c009ea68 00000000 c7597b70 00002000 00000000 c2556ba0
00001000
5f60: c5575fa4 c5575f70 c009f8b0 c009f340 00002000 00000000 000000c1
00000000
5f80: 00000005 00001000 beca0a90 00000004 00000004 c0033e04 00000000
c5575fa8
5fa0: c0033c80 c009f878 00001000 beca0a90 00000004 beca0a90 00001000
00082948
5fc0: 00001000 beca0a90 00000004 00000004 00002000 00000000 00000004
beca0a90
5fe0: 4001e780 beca0a58 0001079c 4015799c 60000010 00000004 00000000
00000000
Backtrace:
[<c013f2a8>] (jffs2_write_end+0x0/0x2d8) from [<c007ddd4>]
(generic_file_buffered_write+0x190/0x62c)
[<c007dc44>] (generic_file_buffered_write+0x0/0x62c) from [<c007e8dc>]
(__generic_file_aio_write_nolock+0x428/0x47c)
[<c007e4b4>] (__generic_file_aio_write_nolock+0x0/0x47c) from
[<c007e9a4>] (generic_file_aio_write+0x74/0xe8)
[<c007e930>] (generic_file_aio_write+0x0/0xe8) from [<c009eb10>]
(do_sync_write+0xb4/0x104)
[<c009ea5c>] (do_sync_write+0x0/0x104) from [<c009f3f0>] (vfs_write
+0xbc/0x14c)
r6:c5575f70 r5:beca0a90 r4:c2556ba0
[<c009f334>] (vfs_write+0x0/0x14c) from [<c009f8b0>] (sys_write
+0x44/0x70)
r7:00001000 r6:c2556ba0 r5:00000000 r4:00002000
[<c009f86c>] (sys_write+0x0/0x70) from [<c0033c80>] (ret_fast_syscall
+0x0/0x2c)
r8:c0033e04 r7:00000004 r6:00000004 r5:beca0a90 r4:00001000
Code: e0893003 e50b3038 e3a03000 e50b3030 (05811000)
---[ end trace 2fd9500c09458ea1 ]---
mtd->read(0xbf3 bytes from 0xf942578) returned ECC error
mtd->read(0xc9a bytes from 0xf943e70) returned ECC error
mtd->read(0xd4f bytes from 0xf944b50) returned ECC error
mtd->read(0xe05 bytes from 0xf9465ec) returned ECC error
mtd->read(0xd16 bytes from 0xf947438) returned ECC error
Data CRC 1a124511 != calculated CRC 47129280 for node at 0f9473f4
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c78f4000
[00000000] *pgd=854e3031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#2]
Modules linked in: ipv6
CPU: 0 Tainted: G D (2.6.27-rc7-omap1 #1)
PC is at jffs2_write_end+0x4c/0x2d8
LR is at generic_file_buffered_write+0x190/0x62c
pc : [<c013f2f4>] lr : [<c007ddd4>] psr: 60000013
sp : c49d9cd8 ip : c49d9d38 fp : c49d9d34
r10: c0522280 r9 : 00000000 r8 : c75979e0
r7 : c789b000 r6 : 00000000 r5 : 00001000 r4 : 00001000
r3 : 00000000 r2 : c794e600 r1 : 00000000 r0 : 00008000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 878f4018 DAC: 00000015
Process cp (pid: 1631, stack limit = 0xc49d82e8)
Stack: (0xc49d9cd8 to 0xc49da000)
9cc0: 00008000
00000000
9ce0: c49d9d04 00000000 00007000 00000000 00008000 00000000 c0522280
00001000
9d00: 00008000 00000000 00001000 00001000 00001000 00000000 c49d8000
00008000
9d20: 00000000 c49d9d80 c49d9dc4 c49d9d38 c007ddd4 c013f2b4 00001000
00001000
9d40: c0522280 c00b28c4 c7597a8c c49d9e90 c7949a20 c7597a8c c032d404
c75979e0
9d60: 00000000 00001000 00000000 c032d404 48852765 076295b7 c00b5b8c
c49d9d98
9d80: c49d9f20 00000001 00000000 00001000 c00b28c4 c0522280 48852765
c7597a54
9da0: c49d9e90 00008000 00000000 00001000 c49d9f20 c75979e0 c49d9e44
c49d9dc8
9dc0: c007e8dc c007dc50 00008000 00000000 c49d9ee0 00001000 00000000
00000000
9de0: c0489f40 c49d9ee0 c49d9e90 c7949a20 c7597a8c 00000000 c031f440
00000001
9e00: c7597a54 22222222 22222222 22222222 22222222 00001000 c7597a54
c7597a54
9e20: c49d9e90 c49d9f20 c75979e0 00008000 00000000 00000001 c49d9e84
c49d9e48
9e40: c007e9a4 c007e4c0 00000000 bedd3a90 c7949a20 c7597a8c 00000000
c49d9e90
9e60: c7949a20 c49d9f70 00001000 bedd2a90 c49d8000 00000004 c49d9f44
c49d9e88
9e80: c009eb10 c007e93c 00008000 00000000 c78f6fb0 c78bcf48 00000000
00000001
9ea0: ffffffff c7949a20 00000000 00000000 00000000 00000000 c7918a00
c49d9ec8
9ec0: 00000000 00000000 00000022 c7918a00 c00667cc c49d9ed4 c49d9ed4
c041a0b8
9ee0: 00008000 00000000 88c090fb 00000013 c49d9f24 c49d9f00 00001000
c01779d0
9f00: 00000000 fffffffd 00000000 00000000 00000000 c74dc320 c006a87c
00000001
9f20: bedd2a90 00001000 00001000 c7949a20 bedd2a90 c49d9f70 c49d9f6c
c49d9f48
9f40: c009f3f0 c009ea68 00000000 c03220b8 00008000 00000000 c7949a20
00001000
9f60: c49d9fa4 c49d9f70 c009f8b0 c009f340 00008000 00000000 c0033cd4
00000000
9f80: 00000005 00001000 bedd2a90 00000004 00000004 c0033e04 00000000
c49d9fa8
9fa0: c0033c80 c009f878 00001000 bedd2a90 00000004 bedd2a90 00001000
00082948
9fc0: 00001000 bedd2a90 00000004 00000004 00008000 00000000 00000004
bedd2a90
9fe0: 4001e780 bedd2a58 0001079c 4015799c 60000010 00000004 00000000
00000000
Backtrace:
[<c013f2a8>] (jffs2_write_end+0x0/0x2d8) from [<c007ddd4>]
(generic_file_buffered_write+0x190/0x62c)
[<c007dc44>] (generic_file_buffered_write+0x0/0x62c) from [<c007e8dc>]
(__generic_file_aio_write_nolock+0x428/0x47c)
[<c007e4b4>] (__generic_file_aio_write_nolock+0x0/0x47c) from
[<c007e9a4>] (generic_file_aio_write+0x74/0xe8)
[<c007e930>] (generic_file_aio_write+0x0/0xe8) from [<c009eb10>]
(do_sync_write+0xb4/0x104)
[<c009ea5c>] (do_sync_write+0x0/0x104) from [<c009f3f0>] (vfs_write
+0xbc/0x14c)
r6:c49d9f70 r5:bedd2a90 r4:c7949a20
[<c009f334>] (vfs_write+0x0/0x14c) from [<c009f8b0>] (sys_write
+0x44/0x70)
r7:00001000 r6:c7949a20 r5:00000000 r4:00008000
[<c009f86c>] (sys_write+0x0/0x70) from [<c0033c80>] (ret_fast_syscall
+0x0/0x2c)
r8:c0033e04 r7:00000004 r6:00000004 r5:bedd2a90 r4:00001000
Code: e0893003 e50b3038 e3a03000 e50b3030 (05811000)
---[ end trace 2fd9500c09458ea1 ]---
mtd->read(0xb6d bytes from 0xf949684) returned ECC error
mtd->read(0xf8a bytes from 0xf94acbc) returned ECC error
mtd->read(0x1000 bytes from 0xf94bc8c) returned ECC error
Data CRC 5c5ce6fc != calculated CRC 99fabfc5 for node at 0f94bc48
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c78f4000
[00000000] *pgd=854e3031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#3]
Modules linked in: ipv6
CPU: 0 Tainted: G D (2.6.27-rc7-omap1 #1)
PC is at jffs2_write_end+0x4c/0x2d8
LR is at generic_file_buffered_write+0x190/0x62c
pc : [<c013f2f4>] lr : [<c007ddd4>] psr: 60000013
sp : c7951cd8 ip : c7951d38 fp : c7951d34
r10: c05226e0 r9 : 00000000 r8 : c75976c0
r7 : c789b000 r6 : 00000000 r5 : 00001000 r4 : 00001000
r3 : 00000000 r2 : c794e600 r1 : 00000000 r0 : 00005000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 878f4018 DAC: 00000015
Process cp (pid: 1633, stack limit = 0xc79502e8)
Stack: (0xc7951cd8 to 0xc7952000)
1cc0: 00005000
c7950000
1ce0: 00001000 00000000 c7950000 00004000 00005000 00000000 c05226e0
00001000
1d00: 00005000 00000000 00001000 00001000 00001000 00000000 c7950000
00005000
1d20: 00000000 c7951d80 c7951dc4 c7951d38 c007ddd4 c013f2b4 00001000
00001000
1d40: c05226e0 c00b28c4 c759776c c7951e90 c79496a0 c759776c c032d404
c75976c0
1d60: 00000000 00001000 00000000 c032d404 48852765 344272e3 c00b5b8c
c7951d98
1d80: c7951f20 00000001 00000000 00001000 c00b28c4 c05226e0 48852765
c7597734
1da0: c7951e90 00005000 00000000 00001000 c7951f20 c75976c0 c7951e44
c7951dc8
1dc0: c007e8dc c007dc50 00005000 00000000 c7951ee0 00001000 00000000
00000000
1de0: c05223a0 c7951ee0 c7951e90 c79496a0 c759776c 00000000 c031f440
00000001
1e00: c7597734 22222222 22222222 22222222 22222222 00001000 c7597734
c7597734
1e20: c7951e90 c7951f20 c75976c0 00005000 00000000 00000001 c7951e84
c7951e48
1e40: c007e9a4 c007e4c0 00000000 bee34a90 c79496a0 c759776c 00000000
c7951e90
1e60: c79496a0 c7951f70 00001000 bee33a90 c7950000 00000004 c7951f44
c7951e88
1e80: c009eb10 c007e93c 00005000 00000000 c78f6fb8 c78bc8cc 00000000
00000001
1ea0: ffffffff c79496a0 00000000 00000000 00000000 00000000 c79185e0
c7951ec8
1ec0: 00000000 00000000 00000022 c79185e0 c00667cc c7951ed4 c7951ed4
c041a0b8
1ee0: 00005000 00000000 be47f1d2 00000013 c7951f24 c7951f00 00001000
c01779d0
1f00: 00000000 fffffffd 00000000 00000000 00000000 c74dc630 c006a87c
00000001
1f20: bee33a90 00001000 00001000 c79496a0 bee33a90 c7951f70 c7951f6c
c7951f48
1f40: c009f3f0 c009ea68 00000000 c03220b8 00005000 00000000 c79496a0
00001000
1f60: c7951fa4 c7951f70 c009f8b0 c009f340 00005000 00000000 c0033cd4
00000000
1f80: 00000005 00001000 bee33a90 00000004 00000004 c0033e04 00000000
c7951fa8
1fa0: c0033c80 c009f878 00001000 bee33a90 00000004 bee33a90 00001000
00082948
1fc0: 00001000 bee33a90 00000004 00000004 00005000 00000000 00000004
bee33a90
1fe0: 4001e780 bee33a58 0001079c 4015799c 60000010 00000004 ebfffffe
e3500000
Backtrace:
[<c013f2a8>] (jffs2_write_end+0x0/0x2d8) from [<c007ddd4>]
(generic_file_buffered_write+0x190/0x62c)
[<c007dc44>] (generic_file_buffered_write+0x0/0x62c) from [<c007e8dc>]
(__generic_file_aio_write_nolock+0x428/0x47c)
[<c007e4b4>] (__generic_file_aio_write_nolock+0x0/0x47c) from
[<c007e9a4>] (generic_file_aio_write+0x74/0xe8)
[<c007e930>] (generic_file_aio_write+0x0/0xe8) from [<c009eb10>]
(do_sync_write+0xb4/0x104)
[<c009ea5c>] (do_sync_write+0x0/0x104) from [<c009f3f0>] (vfs_write
+0xbc/0x14c)
r6:c7951f70 r5:bee33a90 r4:c79496a0
[<c009f334>] (vfs_write+0x0/0x14c) from [<c009f8b0>] (sys_write
+0x44/0x70)
r7:00001000 r6:c79496a0 r5:00000000 r4:00005000
[<c009f86c>] (sys_write+0x0/0x70) from [<c0033c80>] (ret_fast_syscall
+0x0/0x2c)
r8:c0033e04 r7:00000004 r6:00000004 r5:bee33a90 r4:00001000
Code: e0893003 e50b3038 e3a03000 e50b3030 (05811000)
---[ end trace 2fd9500c09458ea1 ]---
mtd->read(0xecf bytes from 0xf94cd48) returned ECC error
mtd->read(0xe61 bytes from 0xf94dc5c) returned ECC error
mtd->read(0xea6 bytes from 0xf94eb04) returned ECC error
mtd->read(0xf0a bytes from 0xf94f9f0) returned ECC error
mtd->read(0x1000 bytes from 0xf950940) returned ECC error
mtd->read(0x1000 bytes from 0xf951984) returned ECC error
mtd->read(0x1000 bytes from 0xf9529c8) returned ECC error
mtd->read(0x1000 bytes from 0xf953a0c) returned ECC error
mtd->read(0x1000 bytes from 0xf954a50) returned ECC error
Data CRC b31f84bf != calculated CRC 612eb184 for node at 0f954a0c
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c78b8000
[00000000] *pgd=82554031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#4]
Modules linked in: ipv6
CPU: 0 Tainted: G D (2.6.27-rc7-omap1 #1)
PC is at jffs2_write_end+0x4c/0x2d8
LR is at generic_file_buffered_write+0x190/0x62c
pc : [<c013f2f4>] lr : [<c007ddd4>] psr: 60000013
sp : c5575cd8 ip : c5575d38 fp : c5575d34
r10: c0522c00 r9 : 00000000 r8 : c7597530
r7 : c789b000 r6 : 00000000 r5 : 00001000 r4 : 00001000
r3 : 00000000 r2 : c794e600 r1 : 00000000 r0 : 00009000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 878b8018 DAC: 00000015
Process cp (pid: 1634, stack limit = 0xc55742e8)
Stack: (0xc5575cd8 to 0xc5576000)
5cc0: 00009000
00000000
5ce0: c5575d04 00000000 00008000 00000000 00009000 00000000 c0522c00
00001000
5d00: 00009000 00000000 00001000 00001000 00001000 00000000 c5574000
00009000
5d20: 00000000 c5575d80 c5575dc4 c5575d38 c007ddd4 c013f2b4 00001000
00001000
5d40: c0522c00 c00b28c4 c75975dc c5575e90 c787cc60 c75975dc c032d404
c7597530
5d60: 00000000 00001000 00000000 c032d404 48852766 2be03746 c00b5b8c
c5575d98
5d80: c5575f20 00000001 00000000 00001000 c00b28c4 c0522c00 48852766
c75975a4
5da0: c5575e90 00009000 00000000 00001000 c5575f20 c7597530 c5575e44
c5575dc8
5dc0: c007e8dc c007dc50 00009000 00000000 c5575ee0 00001000 00000000
00000000
5de0: c0522900 c5575ee0 c5575e90 c787cc60 c75975dc 00000000 c031f440
00000001
5e00: c75975a4 22222222 22222222 22222222 22222222 00001000 c75975a4
c75975a4
5e20: c5575e90 c5575f20 c7597530 00009000 00000000 00000001 c5575e84
c5575e48
5e40: c007e9a4 c007e4c0 00000000 be915a90 c787cc60 c75975dc 00000000
c5575e90
5e60: c787cc60 c5575f70 00001000 be914a90 c5574000 00000004 c5575f44
c5575e88
5e80: c009eb10 c007e93c 00009000 00000000 c78bafa0 c54e3c50 00000000
00000001
5ea0: ffffffff c787cc60 00000000 00000000 00000000 00000000 c7919660
c5575ec8
5ec0: 00000000 00000000 00000022 c7919660 c00667cc c5575ed4 c5575ed4
c041a0b8
5ee0: 00009000 00000000 f106a519 00000013 c5575f24 c5575f00 00001000
c01779d0
5f00: 00000000 fffffffd 00000000 00000000 00000000 c74dc7b8 c006a87c
00000001
5f20: be914a90 00001000 00001000 c787cc60 be914a90 c5575f70 c5575f6c
c5575f48
5f40: c009f3f0 c009ea68 00000000 c03220b8 00009000 00000000 c787cc60
00001000
5f60: c5575fa4 c5575f70 c009f8b0 c009f340 00009000 00000000 c0033cd4
00000000
5f80: 00000005 00001000 be914a90 00000004 00000004 c0033e04 00000000
c5575fa8
5fa0: c0033c80 c009f878 00001000 be914a90 00000004 be914a90 00001000
00082948
5fc0: 00001000 be914a90 00000004 00000004 00009000 00000000 00000004
be914a90
5fe0: 4001e780 be914a58 0001079c 4015799c 60000010 00000004 00000000
00000000
Backtrace:
[<c013f2a8>] (jffs2_write_end+0x0/0x2d8) from [<c007ddd4>]
(generic_file_buffered_write+0x190/0x62c)
[<c007dc44>] (generic_file_buffered_write+0x0/0x62c) from [<c007e8dc>]
(__generic_file_aio_write_nolock+0x428/0x47c)
[<c007e4b4>] (__generic_file_aio_write_nolock+0x0/0x47c) from
[<c007e9a4>] (generic_file_aio_write+0x74/0xe8)
[<c007e930>] (generic_file_aio_write+0x0/0xe8) from [<c009eb10>]
(do_sync_write+0xb4/0x104)
[<c009ea5c>] (do_sync_write+0x0/0x104) from [<c009f3f0>] (vfs_write
+0xbc/0x14c)
r6:c5575f70 r5:be914a90 r4:c787cc60
[<c009f334>] (vfs_write+0x0/0x14c) from [<c009f8b0>] (sys_write
+0x44/0x70)
r7:00001000 r6:c787cc60 r5:00000000 r4:00009000
[<c009f86c>] (sys_write+0x0/0x70) from [<c0033c80>] (ret_fast_syscall
+0x0/0x2c)
r8:c0033e04 r7:00000004 r6:00000004 r5:be914a90 r4:00001000
Code: e0893003 e50b3038 e3a03000 e50b3030 (05811000)
---[ end trace 2fd9500c09458ea1 ]---
mtd->read(0x1000 bytes from 0xf956d8c) returned ECC error
mtd->read(0x1000 bytes from 0xf957dd0) returned ECC error
mtd->read(0xbf5 bytes from 0xf95a42c) returned ECC error
mtd->read(0xc99 bytes from 0xf95bd28) returned ECC error
mtd->read(0xcbd bytes from 0xf95d79c) returned ECC error
mtd->read(0xe05 bytes from 0xf95e4a0) returned ECC error
mtd->read(0xc74 bytes from 0xf9205c8) returned ECC error
mtd->read(0xca6 bytes from 0xf921f88) returned ECC error
mtd->read(0xcdc bytes from 0xf922c74) returned ECC error
Data CRC 9f81f7be != calculated CRC 4489539e for node at 0f922c30
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c78f4000
[00000000] *pgd=82554031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#5]
Modules linked in: ipv6
CPU: 0 Tainted: G D (2.6.27-rc7-omap1 #1)
PC is at jffs2_write_end+0x4c/0x2d8
LR is at generic_file_buffered_write+0x190/0x62c
pc : [<c013f2f4>] lr : [<c007ddd4>] psr: 60000013
sp : c1e03cd8 ip : c1e03d38 fp : c1e03d34
r10: c0523ae0 r9 : 00000000 r8 : c759d850
r7 : c789b000 r6 : 00000000 r5 : 00001000 r4 : 00001000
r3 : 00000000 r2 : c794e600 r1 : 00000000 r0 : 0000c000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 878f4018 DAC: 00000015
Process tar (pid: 1643, stack limit = 0xc1e022e8)
Stack: (0xc1e03cd8 to 0xc1e04000)
3cc0: c004cde8
c0177778
3ce0: 5fbe6db6 00000015 c7919690 c0444a68 0000c000 00000000 c0523ae0
00001000
3d00: 0000c000 00000000 00001000 00001000 00001000 00000000 c1e02000
0000c000
3d20: 00000000 c1e03d80 c1e03dc4 c1e03d38 c007ddd4 c013f2b4 00001000
00001000
3d40: c0523ae0 c00b28c4 c759d8fc c1e03e90 c2556f20 c759d8fc c032d404
c759d850
3d60: 00000000 00001000 00000000 c032d404 48852767 2be03746 c00b5b8c
c1e03d98
3d80: c1e03f20 00000001 00000000 00001000 c00b28c4 c0523ae0 48852767
c759d8c4
3da0: c1e03e90 0000c000 00000000 00001000 c1e03f20 c759d850 c1e03e44
c1e03dc8
3dc0: c007e8dc c007dc50 0000c000 00000000 c1e03ee0 00001000 00000000
c780c520
3de0: c794e56c c1e03ee0 c1e03e90 c2556f20 c759d8fc 00000000 c031f440
00000001
3e00: 48852767 22222222 22222222 22222222 22222222 00001000 c759d8c4
c759d8c4
3e20: c1e03e90 c1e03f20 c759d850 0000c000 00000000 00000001 c1e03e84
c1e03e48
3e40: c007e9a4 c007e4c0 c0325d64 c7868000 c2556f20 c759d8fc 00000000
c1e03e90
3e60: c2556f20 c1e03f70 00001000 bec8c968 c1e02000 00000005 c1e03f44
c1e03e88
3e80: c009eb10 c007e93c 0000c000 00000000 c78f6fb0 c787fa30 00000000
00000001
3ea0: ffffffff c2556f20 00000000 00000000 00000000 00000000 c7919a80
c1e03ec8
3ec0: 00000000 00000000 00000022 c7919a80 c00667cc c1e03ed4 c1e03ed4
c041a0b8
3ee0: 0000c000 00000000 98d3154f 00000014 c1e03f24 c1e03f00 00001000
c01779d0
3f00: 00000000 fffffffd 00000000 c5574000 c1e03f44 c1e03f20 c006a87c
c00465d4
3f20: bec8c968 00001000 00000015 c2556f20 bec8c968 c1e03f70 c1e03f6c
c1e03f48
3f40: c009f3f0 c009ea68 00000000 c03220b8 0000c000 00000000 c2556f20
00001000
3f60: c1e03fa4 c1e03f70 c009f8b0 c009f340 0000c000 00000000 c0033cd4
00000000
3f80: 00000005 00001000 bec8c968 00000005 00000004 c0033e04 00000000
c1e03fa8
3fa0: c0033c80 c009f878 00001000 bec8c968 00000005 bec8c968 00001000
00082948
3fc0: 00001000 bec8c968 00000005 00000004 0000c000 00000000 00000005
bec8c968
3fe0: 4001e780 bec8c930 0001079c 4015799c 60000010 00000005 00000000
00000000
Backtrace:
[<c013f2a8>] (jffs2_write_end+0x0/0x2d8) from [<c007ddd4>]
(generic_file_buffered_write+0x190/0x62c)
[<c007dc44>] (generic_file_buffered_write+0x0/0x62c) from [<c007e8dc>]
(__generic_file_aio_write_nolock+0x428/0x47c)
[<c007e4b4>] (__generic_file_aio_write_nolock+0x0/0x47c) from
[<c007e9a4>] (generic_file_aio_write+0x74/0xe8)
[<c007e930>] (generic_file_aio_write+0x0/0xe8) from [<c009eb10>]
(do_sync_write+0xb4/0x104)
[<c009ea5c>] (do_sync_write+0x0/0x104) from [<c009f3f0>] (vfs_write
+0xbc/0x14c)
r6:c1e03f70 r5:bec8c968 r4:c2556f20
[<c009f334>] (vfs_write+0x0/0x14c) from [<c009f8b0>] (sys_write
+0x44/0x70)
r7:00001000 r6:c2556f20 r5:00000000 r4:0000c000
[<c009f86c>] (sys_write+0x0/0x70) from [<c0033c80>] (ret_fast_syscall
+0x0/0x2c)
r8:c0033e04 r7:00000004 r6:00000005 r5:bec8c968 r4:00001000
Code: e0893003 e50b3038 e3a03000 e50b3030 (05811000)
---[ end trace 2fd9500c09458ea1 ]---
Unable to handle kernel paging request at virtual address ffffffff
pgd = c78f4000
[ffffffff] *pgd=80574021, *pte=00000000, *ppte=00000000
Internal error: Oops: 801 [#6]
Modules linked in: ipv6
CPU: 0 Tainted: G D (2.6.27-rc7-omap1 #1)
PC is at free_block+0x74/0x144
LR is at 0xc780af20
pc : [<c009b468>] lr : [<c780af20>] psr: 00000093
sp : c7827f18 ip : c781b000 fp : c7827f3c
r10: 00000000 r9 : 00000000 r8 : 00000008
r7 : 00000000 r6 : 00000000 r5 : c7809c10 r4 : c78073e0
r3 : ffffffff r2 : ffffffff r1 : 00100100 r0 : c781b380
Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 00c5387f Table: 878f4018 DAC: 00000017
Process events/0 (pid: 5, stack limit = 0xc78262e8)
Stack: (0xc7827f18 to 0xc7828000)
7f00: c7809c10
00000008
7f20: c7809c00 c78073e0 00000000 00000000 c7827f5c c7827f40 c009b5d8
c009b400
7f40: c780af20 c78073e0 00000000 c045b1fc c7827f84 c7827f60 c009c4b4
c009b544
7f60: 00000000 c7827f70 c78019e0 c7826000 c009c470 c78019e0 c7827fa4
c7827f88
7f80: c0062ab0 c009c47c c7827fb8 c781c880 c7826000 c78019e0 c7827fdc
c7827fa8
7fa0: c00635d0 c0062a20 c00662cc 00000000 c781c880 c00667cc c7827fb8
c7827fb8
7fc0: c78019e0 c00634e0 00000000 00000000 c7827ff4 c7827fe0 c00662e4
c00634ec
7fe0: 00000000 00000000 00000000 c7827ff8 c00560fc c006629c 00ffff00
00bffe20
Backtrace:
[<c009b3f4>] (free_block+0x0/0x144) from [<c009b5d8>] (drain_array
+0xa0/0xc8)
r9:00000000 r8:00000000 r7:c78073e0 r6:c7809c00 r5:00000008
r4:c7809c10
[<c009b538>] (drain_array+0x0/0xc8) from [<c009c4b4>] (cache_reap
+0x44/0x118)
r7:c045b1fc r6:00000000 r5:c78073e0 r4:c780af20
[<c009c470>] (cache_reap+0x0/0x118) from [<c0062ab0>] (run_workqueue
+0x9c/0x118)
r7:c78019e0 r6:c009c470 r5:c7826000 r4:c78019e0
[<c0062a14>] (run_workqueue+0x0/0x118) from [<c00635d0>] (worker_thread
+0xf0/0x104)
r7:c78019e0 r6:c7826000 r5:c781c880 r4:c7827fb8
[<c00634e0>] (worker_thread+0x0/0x104) from [<c00662e4>] (kthread
+0x54/0x80)
r7:00000000 r6:00000000 r5:c00634e0 r4:c78019e0
[<c0066290>] (kthread+0x0/0x80) from [<c00560fc>] (do_exit+0x0/0x6c0)
r5:00000000 r4:00000000
Code: e59c2004 e591e04c e59c3000 e59f10c4 (e5823000)
---[ end trace 2fd9500c09458ea1 ]---
mtd->read(0x985 bytes from 0xf925ee0) returned ECC error
Data CRC 98b4b466 != calculated CRC 7ce8322f for node at 0f925e9c
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c78f4000
[00000000] *pgd=878be031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#7]
Modules linked in: ipv6
CPU: 0 Tainted: G D (2.6.27-rc7-omap1 #1)
PC is at jffs2_write_end+0x4c/0x2d8
LR is at generic_file_buffered_write+0x190/0x62c
pc : [<c013f2f4>] lr : [<c007ddd4>] psr: 60000013
sp : c7827cd8 ip : c7827d38 fp : c7827d34
r10: c0523400 r9 : 00000000 r8 : c75a1b70
r7 : c789b000 r6 : 00000000 r5 : 00001000 r4 : 00001000
r3 : 00000000 r2 : c794e600 r1 : 00000000 r0 : 00002000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 878f4018 DAC: 00000015
Process tar (pid: 1649, stack limit = 0xc78262e8)
Stack: (0xc7827cd8 to 0xc7828000)
7cc0: 00002000
00000000
7ce0: c7827d04 c01940ac 00001000 00000000 00002000 00000000 c0523400
00001000
7d00: 00002000 00000000 00001000 00001000 00001000 00000000 c7826000
00002000
7d20: 00000000 c7827d80 c7827dc4 c7827d38 c007ddd4 c013f2b4 00001000
00001000
7d40: c0523400 c00b28c4 c75a1c1c c7827e90 c2556320 c75a1c1c c032d404
c75a1b70
7d60: 00000000 00001000 00000000 c032d404 488527b6 33cb3d4f c00b5b8c
c7827d98
7d80: c7827f20 00000001 00000000 00001000 c00b28c4 c0523400 488527b6
c75a1be4
7da0: c7827e90 00002000 00000000 00001000 c7827f20 c75a1b70 c7827e44
c7827dc8
7dc0: c007e8dc c007dc50 00002000 00000000 c7827ee0 00001000 00000000
c7827df8
7de0: c75940e8 c7827ee0 c7827e90 c2556320 c75a1c1c 00000000 c031f440
00000001
7e00: 488527b6 22222222 22222222 22222222 22222222 00001000 c75a1be4
c75a1be4
7e20: c7827e90 c7827f20 c75a1b70 00002000 00000000 00000001 c7827e84
c7827e48
7e40: c007e9a4 c007e4c0 c0325d64 c786f000 c2556320 c75a1c1c c2556320
c7827e90
7e60: c2556320 c7827f70 00001000 be824968 c7826000 00000005 c7827f44
c7827e88
7e80: c009eb10 c007e93c 00002000 00000000 c009d1b0 c009cf34 00000000
00000001
7ea0: ffffffff c2556320 00000000 00000000 00000000 00000000 c781c880
000081ed
7ec0: 00000000 00000000 00000022 c781c880 c00667cc c7827ed4 c7827ed4
c759c0d8
7ee0: 00002000 00000000 c789a005 00000300 00000000 00000000 00001000
c7827f08
7f00: c759c0d8 fffffffe 00000000 00000000 00000000 c7594200 c7814500
00000001
7f20: be824968 00001000 00001000 c2556320 be824968 c7827f70 c7827f6c
c7827f48
7f40: c009f3f0 c009ea68 00000000 c75a1b70 00002000 00000000 c2556320
00001000
7f60: c7827fa4 c7827f70 c009f8b0 c009f340 00002000 00000000 000000c1
00000000
7f80: 00000005 00001000 be824968 00000005 00000004 c0033e04 00000000
c7827fa8
7fa0: c0033c80 c009f878 00001000 be824968 00000005 be824968 00001000
00082948
7fc0: 00001000 be824968 00000005 00000004 00002000 00000000 00000005
be824968
7fe0: 4001e780 be824930 0001079c 4015799c 60000010 00000005 00ffff00
00bffe20
Backtrace:
[<c013f2a8>] (jffs2_write_end+0x0/0x2d8) from [<c007ddd4>]
(generic_file_buffered_write+0x190/0x62c)
[<c007dc44>] (generic_file_buffered_write+0x0/0x62c) from [<c007e8dc>]
(__generic_file_aio_write_nolock+0x428/0x47c)
[<c007e4b4>] (__generic_file_aio_write_nolock+0x0/0x47c) from
[<c007e9a4>] (generic_file_aio_write+0x74/0xe8)
[<c007e930>] (generic_file_aio_write+0x0/0xe8) from [<c009eb10>]
(do_sync_write+0xb4/0x104)
[<c009ea5c>] (do_sync_write+0x0/0x104) from [<c009f3f0>] (vfs_write
+0xbc/0x14c)
r6:c7827f70 r5:be824968 r4:c2556320
[<c009f334>] (vfs_write+0x0/0x14c) from [<c009f8b0>] (sys_write
+0x44/0x70)
r7:00001000 r6:c2556320 r5:00000000 r4:00002000
[<c009f86c>] (sys_write+0x0/0x70) from [<c0033c80>] (ret_fast_syscall
+0x0/0x2c)
r8:c0033e04 r7:00000004 r6:00000005 r5:be824968 r4:00001000
Code: e0893003 e50b3038 e3a03000 e50b3030 (05811000)
---[ end trace 2fd9500c09458ea1 ]---
mtd->read(0x1000 bytes from 0xf9268f0) returned ECC error
mtd->read(0x1000 bytes from 0xf927934) returned ECC error
mtd->read(0xd54 bytes from 0xf940d10) returned ECC error
Data CRC failed on REF_PRISTINE data node at 0x0f940d10: Read
0xf92468f3, calculated 0x62773783
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged, company confidential and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If this communication has been transmitted from a U.S. location it may also contain data subject to the International Traffic in Arms Regulations or U.S. Export Administration Regulations and cannot be disseminated, distributed or copied to foreign nationals, residing in the U.S. or abroad, without the prior approval of the U.S. Department of State or appropriate export licensing authority. If you have received this communication in error, please notify the sender by reply e-mail or collect telephone call and del
ete or destroy all copies of this e-mail message, any physical copies made of this e-mail message and/or any file attachment(s).
Jason Kridner
> I am trying to use the image supplied on the Beagleboard site for
> flashing Angstrom into the Beagleboard flash as demonstrated at the
> Embedded Systems Conference in Boston, but I cannot get it to work.
>
> I am pulling the images from here:http://beagleboard.org/demo/esc
>
> After building the SD card as per the instructions, booting it, and
> typing "yes<CR>" on the console, I get the following on 2 different
> Beagleboards, including the one I successfully flashed in Boston.
kernel image I had uploaded and it looks like I had the wrong one!
Please try again and report your success/failure.
Kevin Uhlir
2a3408be17f287fdb5809c9b6c68e7ad96d25b74), that the rest button does not
function anymore? Only power down works.
Kevin
david....@aeroflex.com
> Please try again and report your success/failure.
Perhaps you can help me on another, related problem, namely that while
the Monte Vista image boots , it does not see the USB hub and switch
to host mode - so no keyboard, no mouse, no network. This same
hardware works just fine when booting into Angstrom. ( note: I've used
both a mini-A and a mini-B connector to make the connection to the
Beagleboard - no visible change).
Could there be an issue there as well?
Serial output follows:
X-Loader 1.41
Starting on with MMC
Reading boot sector
147164 Bytes Read from MMC
Starting OS Bootloader from MMC...
U-Boot 2008.10-rc2-dirty (Oct 23 2008 - 01:16:38)
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 128 MB
NAND: 256 MiB
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading u-boot.img
447 bytes read
## Executing script at 801f0000
-----------------------------
u-boot3.cmd
Now
Kernel: MMC0P1:uImage
RootFS: MMC0P2
-----------------------------
reading uImage
1933888 bytes read
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Linux-2.6.24_mvl5024BEAGLE-g42a7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1933824 Bytes = 1.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing
Linux.............................................................................................................................
done, booting the kernel.
<5>Linux version 2.6.24_mvl5024BEAGLE-g42a7f851-dirty
(d...@dragonslair.panasol.com) (gcc version 4.2.0 (MontaVista
4.2.0-16.0.32.0801759 2008-08-11)) #582 Tue Oct 14 17:40:33 PDT 2008
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=00c5387f
Machine: OMAP3 Beagle Board
<4>Ignoring unrecognised tag 0x54410009
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7> DMA zone: 256 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 32512 pages, LIFO batch:7
<7> Normal zone: 0 pages used for memmap
<7> Movable zone: 0 pages used for memmap
<6>OMAP3430 ES2.2
<6>SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000
CPU0: D VIPT write-through cache
CPU0: cache: 768 bytes, associativity 1, 8 byte lines, 64 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
32512
<5>Kernel command line: console=ttyS2,115200n8 console=tty1 root=/dev/
mmcblk0p2 rootwait rw
<6>GPMC revision 5.0
<6>IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>OMAP34xx GPIO hardware version 2.5
PID hash table entries: 512 (order: 9, 2048 bytes)
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
<6>console [tty1] enabled
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 128MB 0MB = 128MB total
<5>Memory: 125824KB available (3572K code, 314K data, 120K init)
<7>Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>net_namespace: 76 bytes
<6>NET: Registered protocol family 16
<3>I2C Client[3] is not initialized[511]
<3>I2C Client[3] is not initialized[460]
<6>SmartReflex driver initialized
<6>OMAP DMA hardware revision 4.0
Initializing OMAP McBSP system
<3>USB: No board-specific platform config found
<6>OMAP Display hardware version 2.0
<6>i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
<6>i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
<6>i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
<6>TWL4030: TRY attach Slave TWL4030-ID0 on Adapter OMAP I2C adapter
[1]
<6>TWL4030: TRY attach Slave TWL4030-ID1 on Adapter OMAP I2C adapter
[1]
<6>TWL4030: TRY attach Slave TWL4030-ID2 on Adapter OMAP I2C adapter
[1]
<6>TWL4030: TRY attach Slave TWL4030-ID3 on Adapter OMAP I2C adapter
[1]
<6>TWL4030 Power Companion Active
<6><6>TWL4030: Driver registration complete.
<6>TWL4030 GPIO Demux: IRQ Range 384 to 402, Initialization Success
<7> USB device ATTACHED: Cold plugging
<6>Initialized TWL4030 USB module
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>musb_hdrc: version 6.0/dbg, pio, otg (peripheral+host), debug=1
<7>HS USB OTG: revision 0x33, sysconfig 0x3019, sysstatus 0x1,
intrfsel 0x1, simenable 0x0
<7>musb_hdrc: ConfigData=0x55 (UTMI-16, dyn FIFOs, bulk split (X), HB-
ISO Rx (X))
<7>musb_hdrc: MHDRC RTL version 1.400
<7>musb_hdrc: setup fifo_mode 4
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: invalid ep 8
<7>musb_hdrc: 29/15 max ep, 7232/16384 memory
<7>musb_hdrc: hw_ep 0shared, max 64
<7>musb_hdrc: hw_ep 1tx, max 512
<7>musb_hdrc: hw_ep 1rx, max 512
<7>musb_hdrc: hw_ep 2tx, max 512
<7>musb_hdrc: hw_ep 2rx, max 512
<7>musb_hdrc: hw_ep 3tx, max 512
<7>musb_hdrc: hw_ep 3rx, max 512
<7>musb_hdrc: hw_ep 4tx, max 512
<7>musb_hdrc: hw_ep 4rx, max 512
<7>musb_hdrc: hw_ep 5tx, max 512
<7>musb_hdrc: hw_ep 5rx, max 512
<7>musb_hdrc: hw_ep 6tx, max 512
<7>musb_hdrc: hw_ep 6rx, max 512
<7>musb_hdrc: hw_ep 7tx, max 512
<7>musb_hdrc: hw_ep 7rx, max 512
<6>musb_hdrc: USB OTG mode controller at c8800000 using PIO, IRQ 92
<7>musb_init_controller 2083: OTG mode, status 0, dev98
<7>Registered /proc/driver/musb_hdrc
<6>Bluetooth: Core ver 2.11
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>NET: Registered protocol family 2
<6>Time: 32k_counter clocksource has been installed.
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<3>Power Management for TI OMAP.
<3>create_proc_entry succeeded
<3>create_proc_entry succeeded
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<5>VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
yaffs Oct 9 2008 13:26:20 Installing.
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<7>omap2_disp_outLCD panel 1024x768
<4>timeout waiting for frame-done interrupt
<7>omap2_disp_outTV 640x480 interlaced
<6>omap24xxfb: Options "<NULL>"
Console: switching to colour frame buffer device 128x48
<6>omap24xxfb: fb0 frame buffer device
<6>omap24xxfb: display mode 1024x768x16 hsync 50kHz vsync 64Hz
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
<6>serial8250.0: ttyS0 at MMIO 0x4806a000 mem 0xd806a000 (irq = 72) is
a ST16654
<6>serial8250.0: ttyS1 at MMIO 0x4806c000 mem 0xd806c000 (irq = 73) is
a ST16654
<6>serial8250.0: ttyS2 at MMIO 0x49020000 mem 0xd9020000 (irq = 74) is
a ST16654
<6>console [ttyS2] enabled
Linux version 2.6.24_mvl5024BEAGLE-g42a7f851-dirty
(d...@dragonslair.panasol.com) (gcc version 4.2.0 (MontaVista
4.2.0-16.0.32.0801759 2008-08-11)) #582 Tue Oct 14 17:40:33 PDT 2008
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=00c5387f
Machine: OMAP3 Beagle Board
Ignoring unrecognised tag 0x54410009
Memory policy: ECC disabled, Data cache writeback
OMAP3430 ES2.2
SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000
CPU0: D VIPT write-through cache
CPU0: cache: 768 bytes, associativity 1, 8 byte lines, 64 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
32512
Kernel command line: console=ttyS2,115200n8 console=tty1 root=/dev/
mmcblk0p2 rootwait rw
GPMC revision 5.0
IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP34xx GPIO hardware version 2.5
PID hash table entries: 512 (order: 9, 2048 bytes)
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
console [tty1] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB 0MB = 128MB total
Memory: 125824KB available (3572K code, 314K data, 120K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 76 bytes
NET: Registered protocol family 16
I2C Client[3] is not initialized[511]
I2C Client[3] is not initialized[460]
SmartReflex driver initialized
OMAP DMA hardware revision 4.0
Initializing OMAP McBSP system
USB: No board-specific platform config found
OMAP Display hardware version 2.0
i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
TWL4030: TRY attach Slave TWL4030-ID0 on Adapter OMAP I2C adapter [1]
TWL4030: TRY attach Slave TWL4030-ID1 on Adapter OMAP I2C adapter [1]
TWL4030: TRY attach Slave TWL4030-ID2 on Adapter OMAP I2C adapter [1]
TWL4030: TRY attach Slave TWL4030-ID3 on Adapter OMAP I2C adapter [1]
TWL4030 Power Companion Active
<6>TWL4030: Driver registration complete.
TWL4030 GPIO Demux: IRQ Range 384 to 402, Initialization Success
Initialized TWL4030 USB module
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
musb_hdrc: version 6.0/dbg, pio, otg (peripheral+host), debug=1
musb_hdrc: USB OTG mode controller at c8800000 using PIO, IRQ 92
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 2
Time: 32k_counter clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
Power Management for TI OMAP.
create_proc_entry succeeded
create_proc_entry succeeded
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
yaffs Oct 9 2008 13:26:20 Installing.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
timeout waiting for frame-done interrupt
omap24xxfb: Options "<NULL>"
Console: switching to colour frame buffer device 128x48
omap24xxfb: fb0 frame buffer device
omap24xxfb: display mode 1024x768x16 hsync 50kHz vsync 64Hz
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
serial8250.0: ttyS0 at MMIO 0x4806a000 mem 0xd806a000 (irq = 72) is a
ST16654
serial8250.0: ttyS1 at MMIO 0x4806c000 mem 0xd806c000 (irq = 73) is a
ST16654
serial8250.0: ttyS2 at MMIO 0x49020000 mem 0xd9020000 (irq = 74) is a
ST16654
console [ttyS2] enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
<6>loop: module loaded
loop: module loaded
<6>PPP generic driver version 2.4.2
PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
<6>CSLIP: code copyright 1989 Regents of the University of California.
CSLIP: code copyright 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
SLIP linefill/keepalive option.
<7>drivers/net/usb/kaweth.c: Driver loading
<6>usbcore: registered new interface driver kaweth
usbcore: registered new interface driver kaweth
<6>i2c /dev entries driver
i2c /dev entries driver
<4>Driver 'sd' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
<4>Driver 'sr' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
<6>omap2-nand driver initializing
omap2-nand driver initializing
<6>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND
256MiB 1,8V 16-bit)
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB
1,8V 16-bit)
<5>Creating 5 MTD partitions on "omap2-nand.0":
Creating 5 MTD partitions on "omap2-nand.0":
<5>0x00000000-0x00080000 : "X-Loader"
0x00000000-0x00080000 : "X-Loader"
<5>0x00080000-0x00260000 : "U-Boot"
0x00080000-0x00260000 : "U-Boot"
<5>0x00260000-0x00280000 : "params"
0x00260000-0x00280000 : "params"
<5>0x00280000-0x00680000 : "linux"
0x00280000-0x00680000 : "linux"
<5>0x00680000-0x10000000 : "jffs2"
0x00680000-0x10000000 : "jffs2"
<6>OMAP2 OneNAND driver initializing
OMAP2 OneNAND driver initializing
<6>usbcore: registered new interface driver cdc_acm
usbcore: registered new interface driver cdc_acm
<6>drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model
driver for USB modems and ISDN adapters
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver
for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usblp
usbcore: registered new interface driver usblp
<6>Initializing USB Mass Storage driver...
Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
USB Mass Storage support registered.
<6>usbcore: registered new interface driver libusual
usbcore: registered new interface driver libusual
<6>usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for
generic
drivers/usb/serial/usb-serial.c: USB Serial support registered for
generic
<6>usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver usbserial_generic
<6>drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial Driver core
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for
cp2101
drivers/usb/serial/usb-serial.c: USB Serial support registered for
cp2101
<6>usbcore: registered new interface driver cp2101
usbcore: registered new interface driver cp2101
<6>drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232
serial adaptor driver v0.07
drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial
adaptor driver v0.07
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for
FTDI USB Serial Device
drivers/usb/serial/usb-serial.c: USB Serial support registered for
FTDI USB Serial Device
<6>usbcore: registered new interface driver ftdi_sio
usbcore: registered new interface driver ftdi_sio
<6>drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters
Driver
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters
Driver
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for
Moschip 2 port adapter
drivers/usb/serial/usb-serial.c: USB Serial support registered for
Moschip 2 port adapter
<6>drivers/usb/serial/mos7720.c: Moschip USB Serial Driver 1.0.0.4F
drivers/usb/serial/mos7720.c: Moschip USB Serial Driver 1.0.0.4F
<6>usbcore: registered new interface driver moschip7720
usbcore: registered new interface driver moschip7720
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for
Moschip 7840/7820 USB Serial Driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for
Moschip 7840/7820 USB Serial Driver
<6>drivers/usb/serial/mos7840.c: Moschip 7840/7820 USB Serial Driver
1.3.1
drivers/usb/serial/mos7840.c: Moschip 7840/7820 USB Serial Driver
1.3.1
<6>usbcore: registered new interface driver mos7840
usbcore: registered new interface driver mos7840
<4>ether gadget: using random self ethernet address
ether gadget: using random self ethernet address
<4>ether gadget: using random host ethernet address
ether gadget: using random host ethernet address
<6>usb0: Ethernet Gadget, version: May Day 2005
usb0: Ethernet Gadget, version: May Day 2005
<6>usb0: using musb_hdrc, OUT ep1out IN ep1in STATUS ep2in
usb0: using musb_hdrc, OUT ep1out IN ep1in STATUS ep2in
<6>usb0: MAC 6e:dc:9e:6c:8f:e9
usb0: MAC 6e:dc:9e:6c:8f:e9
<6>usb0: HOST MAC be:21:ce:16:42:f2
usb0: HOST MAC be:21:ce:16:42:f2
<6>usb0: RNDIS ready
usb0: RNDIS ready
<6>musb_hdrc musb_hdrc.0: MUSB HDRC host driver
musb_hdrc musb_hdrc.0: MUSB HDRC host driver
<7>drivers/usb/core/inode.c: creating file 'devices'
<7>drivers/usb/core/inode.c: creating file '001'
<6>musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number
1
musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number 1
<7>usb usb1: default language 0x0409
<7>usb usb1: uevent
<7>usb usb1: usb_probe_device
<6>usb usb1: configuration #1 chosen from 1 choice
usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>usb 1-0:1.0: uevent
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
hub 1-0:1.0: 1 port detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: individual port power switching
<7>hub 1-0:1.0: no over-current protection
<7>hub 1-0:1.0: Single TT
<7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 1-0:1.0: power on to power good time: 10ms
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: enabling power on all ports
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>drivers/usb/core/inode.c: creating file '001'
<7>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: MUSB HDRC host driver
usb usb1: Product: MUSB HDRC host driver
<6>usb usb1: Manufacturer: Linux 2.6.24_mvl5024BEAGLE-g42a7f851-dirty
musb-hcd
usb usb1: Manufacturer: Linux 2.6.24_mvl5024BEAGLE-g42a7f851-dirty
musb-hcd
<6>usb usb1: SerialNumber: musb_hdrc.0
usb usb1: SerialNumber: musb_hdrc.0
<6>mice: PS/2 mouse device common for all mice
mice: PS/2 mouse device common for all mice
<6>Bluetooth: HCI USB driver ver 2.9
Bluetooth: HCI USB driver ver 2.9
<6>usbcore: registered new interface driver hci_usb
usbcore: registered new interface driver hci_usb
<3>clk_get() failed for 'mmchsdb_fck'
clk_get() failed for 'mmchsdb_fck'
<6>usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20
19:16:42 2007 UTC).
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20
19:16:42 2007 UTC).
<6>audio support initialized
audio support initialized
<6>OMAP3430 TWL4030 Audio Support: OMAP3430 TWL4030 Audio Support:
<6>Chip Rev[0x2f] Initialized
<6>Chip Rev[0x2f] Initialized
<6>ALSA device list:
ALSA device list:
<6> #0: TWL4030
#0: TWL4030
<6>TCP cubic registered
TCP cubic registered
<6>NET: Registered protocol family 1
NET: Registered protocol family 1
<6>NET: Registered protocol family 17
NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP ver 2.9
<6>Bluetooth: L2CAP socket layer initialized
Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.8
Bluetooth: RFCOMM ver 1.8
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
<6>Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP filters: protocol multicast
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Loop count exceeded in check_clock_domain_statusfor domain:1
Loop count exceeded in check_clock_domain_statusfor domain:1
<6>VFP support v0.3: VFP support v0.3: implementor 41 architecture 3
part 30 variant c rev 1
implementor 41 architecture 3 part 30 variant c rev 1
<6>Waiting for root device /dev/mmcblk0p2...
Waiting for root device /dev/mmcblk0p2...
<4>mmc0: host does not support reading read-only switch. assuming
write-enable.
mmc0: host does not support reading read-only switch. assuming write-
enable.
<6>mmc0: new high speed SD card at address 0007
mmc0: new high speed SD card at address 0007
<6>mmcblk0: mmc0:0007 SD02G 1992704KiB
mmcblk0: mmc0:0007 SD02G 1992704KiB
<6> mmcblk0: mmcblk0: p1 p1 p2 p2
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>kjournald starting. Commit interval 5 seconds
kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on mmcblk0p2, EXT3 FS on mmcblk0p2, internal journal
internal journal
<6>EXT3-fs: recovery complete.
EXT3-fs: recovery complete.
<6>EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
<6>Freeing init memory: 120K
Freeing init memory: 120K
MontaVista(R) Linux(R) Mobilinux 5.1
BeagleBoard login:
CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.2 | VT102 |
Offline
david....@aeroflex.com
Also, a Would Be Nice: It would be nice to have the option of
COMPLETELY reflashing the board: x-loader and uboot as well as the
uImage. Just to be able to easily put the board into a known state.
Jason Kridner
are meant to do this. This page is referenced on http://beagleboard.org/demo/esc
as well, but without the recommendation to use the images to re-
initialize the board with x-loader and u-boot.
Hunyue Yau
>
> > Please try again and report your success/failure.
>
> That fixed that problem.
>
> Perhaps you can help me on another, related problem, namely that while
> the Monte Vista image boots , it does not see the USB hub and switch
> to host mode - so no keyboard, no mouse, no network. This same
> hardware works just fine when booting into Angstrom. ( note: I've used
> both a mini-A and a mini-B connector to make the connection to the
> Beagleboard - no visible change).
>
> Could there be an issue there as well?
try a few things to see if it helps -
Disconnect the power
Plug in the mini-A cable to the beagleboard and your self powered hub to that.
Power on
Sometimes the USB PHY (the TWL4030) gets confused and needs a power cycle
for it to start seeing things in OTG mode. The other thing to do is make sure
the hub is plugged in prior to powering on the system. Hot detect directly on
the board can sometimes fail for unknown reasons (see the bug report on the
Linux-omap list from earlier this year).
-- Hunyue
david....@aeroflex.com
On Nov 6, 3:53 pm, Hunyue Yau <ybea...@rehut.com> wrote:
>
> > Could there be an issue there as well?
>
> These look like known problems with the MUSB driver. Nevertheless, could you
> try a few things to see if it helps -
>
> Disconnect the power
>
> Plug in the mini-A cable to the beagleboard and your self powered hub to that.
>
> Power on
>
with the Angstrom image and it works.