Beagle Board Google Group

Re: [beagleboard] Archos 5 as Dev platform?

2010-01-03T21:34:56Z

Op 3 jan 2010, om 21:55 heeft pezman het volgende geschreven:
I haven't been able to discover the hdmi out nor the gps hardware, they seem to require optional add-ons. My 5g is being helpfull by opening a browser to their e-store to purchase the gps and hdmi options when trying to use them, though :)

Archos 5 as Dev platform?

2010-01-03T20:55:47Z

I've seen some rumblings about this. Anyone have experience with the
new dev firmware, and does it run on the new platform, the old
platform or both?
[link]
The new Archos 5 is $250 at Radio Shack in the U.S., which seems like

Re: [beagleboard] Re: I2C2_SDA and I2C2_SCL pins 23,24 on the expansion port

2010-01-03T20:55:00Z

I posted the info about the i2c-2 before. Please read this URL:
[link]
On Sun, Jan 3, 2010 at 3:02 AM, ghanashyam prabhu <

Re: I2C2_SDA and I2C2_SCL pins 23,24 on the expansion port

2010-01-03T11:02:54Z

Hi Am Shyam, working with Mohan...
Adding the Pin Mux configuration details..
We have set the pin mux configuration to work in Mode0 (that is the
I2C mode),This has been set in the mux.h/ mux.c and beagle.h files as
mentioned in a lot of forums. So we tried this for configuring pin mux
in the kernel. Pin mux configuration is also changed during U-boot..

Re: [beagleboard] Urgent need for a beagleboard ? Can anybody sell or rent me one ?

2010-01-03T12:35:59Z

get this from IDA systems from Jaipur in just 5 working days
saurabh Ambukar

Re: [beagleboard] Urgent need for a beagleboard ? Can anybody sell or rent me one ?

2010-01-03T12:23:09Z

IDA Systems ([link]) have rev C3 in stock
Rakshat

Re: [beagleboard] Urgent need for a beagleboard ? Can anybody sell or rent me one ?

2010-01-03T11:37:30Z

Dear Babbu,
Kindly provide your put up location information.
with regards,
saminath

Re: [beagleboard] Re: BeagleBoard Labs/Training from Free Electrons

2010-01-03T09:00:39Z

Sent via BlackBerry® from AIS

-----Original Message-----
To: <beagleboard@googlegroups.com>

Everything. :)

Yes it can, but that capability isn't worth much if you can't help the
student see the motivation behind all that capability AND properly equip
them to take advantage of all that cool stuff.

Re: [beagleboard] Urgent need for a beagleboard ? Can anybody sell or rent me one ?

2010-01-03T08:37:35Z

babbu escribiï¿½:
Hello
I've a new unused beagleboard rev c3. The previous beagle I buy was
broked and the beagle Hospital was replaced it. I can sell you the same
price as Digikey.

Re: [beagleboard] Urgent need for a beagleboard ? Can anybody sell or rent me one ?

2010-01-03T02:52:43Z

Where are you located?

Urgent need for a beagleboard ? Can anybody sell or rent me one ?

2010-01-02T23:03:56Z

Hi,
I am working on a project for which i need to present a demo on the
1st week of Feb. I just realized that purchasing from the web is not
going to get me one before march.
I would really appreciate if somebody can help me with this ?
Thanks in Advance
Babbu

Re: Dropbear and Beagleboard

2010-01-02T20:28:37Z

I connected the usb cdma modem to a windows machine and tried to ping
it with the same results - nada. I'd wager my ISP (Telus) is blocking
all incoming traffic. Unfortunately, when I talked to their network
support the other day about the possibility of blocking incoming ports
the guy had no idea what I was talking about and kept saying, "you

Re: Dropbear and Beagleboard

2010-01-02T17:43:18Z

Ya, I was going to try that today when I get back to my office. It
occurred to me that the ISP maybe blocking all incoming data. I'll
let you know.
Cheers

Re: [beagleboard] Dropbear and Beagleboard

2010-01-02T14:40:40Z

Am Donnerstag, den 31.12.2009, 13:18 -0800 schrieb Will:
Is pinging a system connected by a USB CDMA or GSM modem working for you
on another system? If not, you might get better answers at a different
place than this list. Sorry. But please report your results back.
Thanks,
Paul

Re: [beagleboard] Re: I2C2_SDA and I2C2_SCL pins 23,24 on the expansion port

2010-01-02T13:50:15Z

If you are getting a 1.8V level without the pullups, then you do not have
the correct MUX settings on the I2C lines. They are most likley set to a
GPIO mode. You need to set up the pin muxing to enable the I2C modes on
those pins. I suggest you do a search on the discussion group for help on
this issue. It has been discussed many times in the past.