--
You received this message because you are subscribed to the Google Groups "Beagle Board" group.
To post to this group, send email to beagl...@googlegroups.com.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=.
--
Thank you all for making my evening.
On Nov 19, 2009 8:58 PM, "Robert P. J. Day" <rpj...@crashcourse.ca> wrote:On Thu, 19 Nov 2009, Eric Fung wrote: > Good news to me. I hope I will get my 44 boards. They are t...
somewhere, there is a "hey, nice rack!" joke waiting to be made.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Kernel Pedantry.
Web page: http://crashcourse.ca
Twitter: http://twitter.com/rpjday
========================================================================
-- You received this message because you are subscribed to the Google Groups "Beagle Board" group....
--
You received this message because you are subscribed to the Google Groups "Beagle Board" group.
To post to this group, send email to beagl...@googlegroups.com.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Beagle Board" group.
To post to this group, send email to beagl...@googlegroups.com.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
On Mon, Nov 23, 2009 at 4:04 PM, jmelson <el...@pico-systems.com> wrote:I agree. I was trying to push the beagleboard into a parallel
>
> Potentially a SIX MONTH wait???? Oh, NO! I am developing a product
> that was to be built around the Beagle Board, at least initially!
>
> This is really serious!
>
processing project at my work for the current development cycle, but
boards will only be available after the cycle is over. We're looking
at about 50-75 boards. We'll have to can it until next year...
--
We are working the issue daily and I hope for a resolution soon. The TFP410 is the issue at the moment. Everything else is in.
Hi,
I am trying to make a bootscreen or splashscreen for my new system. I used the dss_init(void) function from
http://groups.google.com/group/beagleboard/browse_thread/thread/3ad9b803a3418624
to copy the logo from my company to framebuffer in u-boot.
Unfortunately the kernel initializes a new framebuffer and the logo gets lost.
My idea is to write some extra code into the DSS driver that copies the logo from u-boot’s framebuffer to the new initialized one.
Can anyone tell me where especially in which function the new framebuffer gets initialized?
Actually another problem arose during kernel executed. The framebuffer from u-boot got overwritten by kernel (cracy pixel on the display). The u-boot’s dss_init() allocates the framebuffer at 0x80500000, which is 5MB after memory start and about 3MB after the kernel’s area in memory.
Does someone know what memory region kernel uses when executed? Maybe it is possible to change u-boot’s framebuffer region to a memory area, which will not be overwritten by kernel.
Greetings from the cold Bavarian countryside
Sebastian
Hi,
I am trying to make a bootscreen or splashscreen for my new system.
--
You received this message because you are subscribed to the Google Groups "Beagle Board" group.
To post to this group, send email to beagl...@googlegroups.com.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
Thanks,
Jon
That means you will get 14 C3F boards and the rest will be C4. But, they are currently way out there. Maybe April or May, unless something happens to get us the parts sooner.
To post to this group, send email to beagl...@googlegroups.com.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
although I will get a single eval outside of the US (cost ->
ouch!) for use until then.
The cost is high because we imported BB's from US into India paying customs and shipping and now will be shipping single units back to the US! Had not really planned for this scenario.
Specifically, if one were to place an order now with Digikey, one
would receive a board from this shipment?
Thanks!
Norman
> > > > > > > >>>>beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > <beagleboard%2Bunsu...@googlegroups.com<beagleboard%252Bunsubscribe@googlegroups.com>
>
> > > > <beagleboard%2Bunsubscribe@googlegroups.com>
> > > > > > > .
> > > > > > > >>>> For more options, visit this group at
> > > > > > > >>>>http://groups.google.com/group/beagleboard?hl=.
>
> > > > > > > >>> --
>
> > > > > > > >>> You received this message because you are subscribed to the
> > > > Google
> > > > > > > Groups
> > > > > > > >>> "Beagle Board" group.
> > > > > > > >>> To post to this group, send email
> > tobeag...@googlegroups.com
> > > > .
> > > > > > > >>> To unsubscribe from this group, send email to
> > > > > > > >>>beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > <beagleboard%2Bunsu...@googlegroups.com<beagleboard%252Bunsubscribe@googlegroups.com>
>
> > > > <beagleboard%2Bunsubscribe@googlegroups.com>
> > > > > > > .
> > > > > > > >>> For more options, visit this group at
> > > > > > > >>>http://groups.google.com/group/beagleboard?hl=.
>
> > > > > > > >> --
> > > > > > > >> daniel g robinson
> > > > > > > >>www.bornlivelovedie.com
>
> > > > > > > >> --
>
> > > > > > > >> You received this message because you are subscribed to the
> > Google
> > > > > > > Groups
> > > > > > > >> "Beagle Board" group.
> > > > > > > >> To post to this group, send email
> > tobeag...@googlegroups.com.
> > > > > > > >> To unsubscribe from this group, send email to
> > > > > > > >>beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > <beagleboard%2Bunsu...@googlegroups.com<beagleboard%252Bunsubscribe@googlegroups.com>
>
> > > > <beagleboard%2Bunsubscribe@googlegroups.com>
> > > > > > > .
> > > > > > > >> For more options, visit this group at
> > > > > > > >>http://groups.google.com/group/beagleboard?hl=.
>
> > > > > > > > --
>
> > > > > > > > You received this message because you are subscribed to the
> > Google
> > > > Groups
> > > > > > > > "Beagle Board" group.
> > > > > > > > To post to this group, send email
> > tobeag...@googlegroups.com.
> > > > > > > > To unsubscribe from this group, send email to
> > > > > > > >beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > <beagleboard%2Bunsu...@googlegroups.com<beagleboard%252Bunsubscribe@googlegroups.com>
>
> > > > <beagleboard%2Bunsubscribe@googlegroups.com>
> > > > > > > .
> > > > > > > > For more options, visit this group at
> > > > > > > >http://groups.google.com/group/beagleboard?hl=.
>
> > > > > > > --
>
> > > > > > > You received this message because you are subscribed to the
> > Google
> > > > Groups
> > > > > > > "Beagle Board" group.
> > > > > > > To post to this group, send email tobeag...@googlegroups.com
> > .
> > > > > > > To unsubscribe from this group, send email to
> > > > > > >beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > <beagleboard%2Bunsu...@googlegroups.com<beagleboard%252Bunsubscribe@googlegroups.com>
>
> > > > <beagleboard%2Bunsubscribe@googlegroups.com>
> > > > > > > .
> > > > > > > For more options, visit this group at
> > > > > > >http://groups.google.com/group/beagleboard?hl=.-Hidequoted text
> > -
>
> > > > > - Show quoted text -
>
> > > > --
>
> > > > You received this message because you are subscribed to the Google
> > Groups
> > > > "Beagle Board" group.
> > > > To post to this group, send email to beagl...@googlegroups.com.
> > > > To unsubscribe from this group, send email to
> > > > beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > <beagleboard%2Bunsu...@googlegroups.com<beagleboard%252Bunsubscribe@googlegroups.com>
>
> > > > .
> > > > For more options, visit this group at
> > > >http://groups.google.com/group/beagleboard?hl=en.
>
> > --
>
> > You received this message because you are subscribed to the Google Groups
> > "Beagle Board" group.
> > To post to this group, send email to beagl...@googlegroups.com.
> > To unsubscribe from this group, send email to
> > beagleboard...@googlegroups.com<beagleboard%2Bunsubscribe@googlegroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/beagleboard?hl=en.- Hide quoted text -
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.