New angstrom demo image available
548 views
Skip to first unread message
Koen Kooi
Jan 11, 2011, 5:35:50 AM1/11/11
to beagleboard@googlegroups.com Board
Hi,
Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
You can download it from these two sites:
Europe: http://www.angstrom-distribution.org/demo/beagleboard/Angstrom-Beagleboard-demo-image-glibc-ipk-2011.1-beagleboard.rootfs.tar.bz2
US West Coast: http://narcissus.angstrom-distribution.org/static/beagleboard/Angstrom-Beagleboard-demo-image-glibc-ipk-2011.1-beagleboard.rootfs.tar.bz2
Instructions on how to untar it can be found at:
http://www.angstrom-distribution.org/demo/beagleboard/
If you want to recreate it using narcissus:
1) go to http://narcissus.angstrom-distribution.org/
2) select 'beagleboard' as machine
3) select 'X11' as user environment
4) select GNOME
5) select screen, powertop, mplayer, midori, TI texture streaming demo for X11 and Texas Instruments Gstreamer plugins
6) click 'Build me!'
If you want to recreate it using OE:
1) following instructions at http://www.angstrom-distribution.org/building-angstrom
2) MACHINE=beagleboard ./oebb.sh bitbake angstrom-gnome-image
It's going to a bit tight with RAM on revision B boards, but it works beautifully on revision C and xM.
regards,
Koen
sphyrian
Jan 13, 2011, 4:45:14 PM1/13/11
to Beagle Board
Hello,
I looked at this new version. I like it, /etc/fstab is very
interresting, but my kernel is 2.6.32, I didn't found the new 2.6.37.
Is there a way to get lighttpd with ssl ?
Thanks for Angstrom.
On 11 jan, 11:35, Koen Kooi <k...@beagleboard.org> wrote:
> Hi,
>
> Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
> Europe:http://www.angstrom-distribution.org/demo/beagleboard/Angstrom-Beagle...
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
I looked at this new version. I like it, /etc/fstab is very
interresting, but my kernel is 2.6.32, I didn't found the new 2.6.37.
Is there a way to get lighttpd with ssl ?
Thanks for Angstrom.
On 11 jan, 11:35, Koen Kooi <k...@beagleboard.org> wrote:
> Hi,
>
> Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> Instructions on how to untar it can be found at:
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
> 1) go tohttp://narcissus.angstrom-distribution.org/
> Instructions on how to untar it can be found at:
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
ssocco
Jan 14, 2011, 12:50:49 AM1/14/11
to Beagle Board
Hello Koen,
I'm trying to 'MACHINE=beagleboard ./oebb.sh bitbake angstrom-gnome-
image' for the first time from a Ubuntu 10.04 machine. I think I have
all my native packages required but am seeing the following error
(bison package related?). Any ideas on my configuration problems?
Thanks
dell-xps@dell-xps-laptop:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts$ MACHINE=beagleboard ./oebb.sh
bitbake angstrom-gnome-image
Updating bitbake
Executing: cd /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/sources/bitbake && git pull --rebase
Current branch 1.10 is up to date.
Updating OpenEmbedded
Executing: git pull --rebase
Current branch org.openembedded.dev is up to date.
Using ~/.oe/environment to setup needed variables. It is recommended
to do '. ~/.oe/environment' and run 'bitbake something' without
using ./oebb.sh as wrapper
Executing: MACHINE=beagleboard bitbake angstrom-gnome-image
NOTE: Handling BitBake files: \ (7065/7065) [100 %]
Parsing of 7065 .bb files complete (6630 cached, 435 parsed). 7373
targets, 306 skipped, 0 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.10.2"
METADATA_BRANCH = "org.openembedded.dev"
METADATA_REVISION = "0af4d2e"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "beagleboard"
DISTRO = "angstrom"
DISTRO_VERSION = "2010.7-test-20110114"
TARGET_FPU = "hard"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 411 of 10949 (ID: 3896, virtual:native:/media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/sources/openembedded/recipes/bison/bison_2.4.3.bb,
do_configure)
NOTE: package bison-native-2.4.3-r8.0: task do_configure: Started
NOTE: Running task 1002 of 10949 (ID: 665, virtual:native:/media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/sources/openembedded/recipes/util-linux-ng/util-linux-
ng_2.17.bb, do_configure)
NOTE: package util-linux-ng-native-2.17-r35: task do_configure:
Started
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb do_configure failed
ERROR: Task 3896 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb, do_configure) failed with exit code 1
ERROR: Function do_configure failed
NOTE: Task failed: ('function do_configure failed', '/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/temp/
log.do_configure.19618')
ERROR: Logfile of failure stored in: /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/temp/
log.do_configure.19618
Log data follows:
| automake (GNU automake) 1.11.1
| Copyright (C) 2009 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/
gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tro...@redhat.com>
| and Alexandre Duret-Lutz <a...@gnu.org>.
| AUTOV is 1.11
| NOTE: Executing autoreconf --verbose --install --force --
exclude=autopoint -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/
i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/data/ -I /media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-
r8.0/bison-2.4.3/m4/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/
i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/tests/ -I/media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-
linux/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: running: aclocal -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
data/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/ -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
tests/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/
usr/share/aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/share/aclocal -I /media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
data/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/ -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
tests/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/
usr/share/aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/share/aclocal --force -I m4
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/glib.m4:8: warning: underquoted
definition of AM_PATH_GLIB
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/glib.m4:8: run info
'(automake)Extending aclocal'
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/glib.m4:8: or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
| autoreconf: configure.ac: tracing
| configure.ac:128: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:8870: gl_POSIX_SPAWN_WORKS is expanded from...
| aclocal.m4:8799: gl_POSIX_SPAWN_BODY is expanded from...
| aclocal.m4:8794: gl_POSIX_SPAWN is expanded from...
| aclocal.m4:3234: gl_INIT is expanded from...
| configure.ac:128: the top level
| autoreconf: configure.ac: not using Libtool
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoconf --include=/media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
data/ --include=/media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/
bison-native-2.4.3-r8.0/bison-2.4.3/m4/ --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/
bison-2.4.3/tests/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --include=/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force --warnings=cross
| configure.ac:128: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:8870: gl_POSIX_SPAWN_WORKS is expanded from...
| aclocal.m4:8799: gl_POSIX_SPAWN_BODY is expanded from...
| aclocal.m4:8794: gl_POSIX_SPAWN is expanded from...
| aclocal.m4:3234: gl_INIT is expanded from...
| configure.ac:128: the top level
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoheader --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/
bison-2.4.3/data/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
m4/ --include=/media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/
bison-native-2.4.3-r8.0/bison-2.4.3/tests/ --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --
include=/media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/
usr/share/aclocal --force --warnings=cross
| autoreconf: failed to run /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/bin/autoheader: No such file
or directory
| FATAL: autoreconf execution failed.
| ERROR: Function do_configure failed
NOTE: package bison-native-2.4.3-r8.0: task do_configure: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb do_configure failed
ERROR: Task 3896 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb, do_configure) failed with exit code 1
Waiting for 1 active tasks to finish:
1: util-linux-ng-native-2.17-r35 do_configure (pid 19658)
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb do_configure failed
ERROR: Task 665 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb, do_configure) failed with
exit code 1
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
bison/bison_2.4.3.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
util-linux-ng/util-linux-ng_2.17.bb' failed
ERROR: Function do_configure failed
NOTE: Task failed: ('function do_configure failed', '/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-
r35/temp/log.do_configure.19658')
ERROR: Logfile of failure stored in: /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-r35/temp/
log.do_configure.19658
Log data follows:
| automake (GNU automake) 1.11.1
| Copyright (C) 2009 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/
gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tro...@redhat.com>
| and Alexandre Duret-Lutz <a...@gnu.org>.
| AUTOV is 1.11
| NOTE: Executing autoreconf --verbose --install --force --
exclude=autopoint -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/
i686-linux/util-linux-ng-native-2.17-r35/util-linux-ng-2.17/m4/ -I/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-
linux/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: running: aclocal -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-r35/util-
linux-ng-2.17/m4/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/share/aclocal-1.11 -I /media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal -I /media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-
native-2.17-r35/util-linux-ng-2.17/m4/ -I /media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 -I /media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force -I m4
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-
native-2.17-r35/util-linux-ng-2.17/m4/gettext.m4:430: warning: macro
`AM_LC_MESSAGES' not found in library
| autoreconf: configure.ac: tracing
| configure.ac:243: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:2697: _AC_RUN_IFELSE is expanded
from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:11116: AX_CHECK_TLS is expanded from...
| configure.ac:243: the top level
| autoreconf: running: libtoolize --copy --force
| libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'.
| libtoolize: copying file `config/ltmain.sh'
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
| libtoolize: copying file `m4/libtool.m4'
| libtoolize: copying file `m4/ltoptions.m4'
| libtoolize: copying file `m4/ltsugar.m4'
| libtoolize: copying file `m4/ltversion.m4'
| libtoolize: copying file `m4/lt~obsolete.m4'
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-
native-2.17-r35/util-linux-ng-2.17/m4/gettext.m4:430: warning: macro
`AM_LC_MESSAGES' not found in library
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoconf --include=/media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-r35/util-
linux-ng-2.17/m4/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --include=/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force --warnings=cross
| configure.ac:243: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:2697: _AC_RUN_IFELSE is expanded
from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:11116: AX_CHECK_TLS is expanded from...
| configure.ac:243: the top level
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoheader --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-
r35/util-linux-ng-2.17/m4/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --include=/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force --warnings=cross
| autoreconf: failed to run /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/bin/autoheader: No such file
or directory
| FATAL: autoreconf execution failed.
| ERROR: Function do_configure failed
NOTE: package util-linux-ng-native-2.17-r35: task do_configure: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb do_configure failed
ERROR: Task 665 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb, do_configure) failed with
exit code 1
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
bison/bison_2.4.3.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
util-linux-ng/util-linux-ng_2.17.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
bison/bison_2.4.3.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
util-linux-ng/util-linux-ng_2.17.bb' failed
dell-xps@dell-xps-laptop:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts$ MACHINE=beagleboard ./oebb.sh
bitbake angstrom-gnome-image
On Jan 11, 2:35 am, Koen Kooi <k...@beagleboard.org> wrote:
> Hi,
>
> Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
I'm trying to 'MACHINE=beagleboard ./oebb.sh bitbake angstrom-gnome-
image' for the first time from a Ubuntu 10.04 machine. I think I have
all my native packages required but am seeing the following error
(bison package related?). Any ideas on my configuration problems?
Thanks
dell-xps@dell-xps-laptop:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts$ MACHINE=beagleboard ./oebb.sh
bitbake angstrom-gnome-image
Updating bitbake
Executing: cd /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/sources/bitbake && git pull --rebase
Current branch 1.10 is up to date.
Updating OpenEmbedded
Executing: git pull --rebase
Current branch org.openembedded.dev is up to date.
Using ~/.oe/environment to setup needed variables. It is recommended
to do '. ~/.oe/environment' and run 'bitbake something' without
using ./oebb.sh as wrapper
Executing: MACHINE=beagleboard bitbake angstrom-gnome-image
NOTE: Handling BitBake files: \ (7065/7065) [100 %]
Parsing of 7065 .bb files complete (6630 cached, 435 parsed). 7373
targets, 306 skipped, 0 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.10.2"
METADATA_BRANCH = "org.openembedded.dev"
METADATA_REVISION = "0af4d2e"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "beagleboard"
DISTRO = "angstrom"
DISTRO_VERSION = "2010.7-test-20110114"
TARGET_FPU = "hard"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 411 of 10949 (ID: 3896, virtual:native:/media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/sources/openembedded/recipes/bison/bison_2.4.3.bb,
do_configure)
NOTE: package bison-native-2.4.3-r8.0: task do_configure: Started
NOTE: Running task 1002 of 10949 (ID: 665, virtual:native:/media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/sources/openembedded/recipes/util-linux-ng/util-linux-
ng_2.17.bb, do_configure)
NOTE: package util-linux-ng-native-2.17-r35: task do_configure:
Started
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb do_configure failed
ERROR: Task 3896 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb, do_configure) failed with exit code 1
ERROR: Function do_configure failed
NOTE: Task failed: ('function do_configure failed', '/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/temp/
log.do_configure.19618')
ERROR: Logfile of failure stored in: /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/temp/
log.do_configure.19618
Log data follows:
| automake (GNU automake) 1.11.1
| Copyright (C) 2009 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/
gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tro...@redhat.com>
| and Alexandre Duret-Lutz <a...@gnu.org>.
| AUTOV is 1.11
| NOTE: Executing autoreconf --verbose --install --force --
exclude=autopoint -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/
i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/data/ -I /media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-
r8.0/bison-2.4.3/m4/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/
i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/tests/ -I/media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-
linux/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: running: aclocal -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
data/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/ -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
tests/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/
usr/share/aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/share/aclocal -I /media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
data/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/ -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
tests/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/
usr/share/aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/share/aclocal --force -I m4
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/glib.m4:8: warning: underquoted
definition of AM_PATH_GLIB
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/glib.m4:8: run info
'(automake)Extending aclocal'
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/bison-
native-2.4.3-r8.0/bison-2.4.3/m4/glib.m4:8: or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
| autoreconf: configure.ac: tracing
| configure.ac:128: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:8870: gl_POSIX_SPAWN_WORKS is expanded from...
| aclocal.m4:8799: gl_POSIX_SPAWN_BODY is expanded from...
| aclocal.m4:8794: gl_POSIX_SPAWN is expanded from...
| aclocal.m4:3234: gl_INIT is expanded from...
| configure.ac:128: the top level
| autoreconf: configure.ac: not using Libtool
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoconf --include=/media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
data/ --include=/media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/
bison-native-2.4.3-r8.0/bison-2.4.3/m4/ --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/
bison-2.4.3/tests/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --include=/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force --warnings=cross
| configure.ac:128: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:8870: gl_POSIX_SPAWN_WORKS is expanded from...
| aclocal.m4:8799: gl_POSIX_SPAWN_BODY is expanded from...
| aclocal.m4:8794: gl_POSIX_SPAWN is expanded from...
| aclocal.m4:3234: gl_INIT is expanded from...
| configure.ac:128: the top level
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoheader --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/
bison-2.4.3/data/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/bison-native-2.4.3-r8.0/bison-2.4.3/
m4/ --include=/media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/
bison-native-2.4.3-r8.0/bison-2.4.3/tests/ --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --
include=/media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/
angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/
usr/share/aclocal --force --warnings=cross
| autoreconf: failed to run /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/bin/autoheader: No such file
or directory
| FATAL: autoreconf execution failed.
| ERROR: Function do_configure failed
NOTE: package bison-native-2.4.3-r8.0: task do_configure: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb do_configure failed
ERROR: Task 3896 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/bison/bison_2.4.3.bb, do_configure) failed with exit code 1
Waiting for 1 active tasks to finish:
1: util-linux-ng-native-2.17-r35 do_configure (pid 19658)
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb do_configure failed
ERROR: Task 665 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb, do_configure) failed with
exit code 1
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
bison/bison_2.4.3.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
util-linux-ng/util-linux-ng_2.17.bb' failed
ERROR: Function do_configure failed
NOTE: Task failed: ('function do_configure failed', '/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-
r35/temp/log.do_configure.19658')
ERROR: Logfile of failure stored in: /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-r35/temp/
log.do_configure.19658
Log data follows:
| automake (GNU automake) 1.11.1
| Copyright (C) 2009 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/
gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tro...@redhat.com>
| and Alexandre Duret-Lutz <a...@gnu.org>.
| AUTOV is 1.11
| NOTE: Executing autoreconf --verbose --install --force --
exclude=autopoint -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/
i686-linux/util-linux-ng-native-2.17-r35/util-linux-ng-2.17/m4/ -I/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal-1.11 -I /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/
clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-
linux/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: running: aclocal -I /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-r35/util-
linux-ng-2.17/m4/ -I /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/share/aclocal-1.11 -I /media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal -I /media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-
native-2.17-r35/util-linux-ng-2.17/m4/ -I /media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 -I /media/
Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-
scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force -I m4
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-
native-2.17-r35/util-linux-ng-2.17/m4/gettext.m4:430: warning: macro
`AM_LC_MESSAGES' not found in library
| autoreconf: configure.ac: tracing
| configure.ac:243: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:2697: _AC_RUN_IFELSE is expanded
from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:11116: AX_CHECK_TLS is expanded from...
| configure.ac:243: the top level
| autoreconf: running: libtoolize --copy --force
| libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'.
| libtoolize: copying file `config/ltmain.sh'
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
| libtoolize: copying file `m4/libtool.m4'
| libtoolize: copying file `m4/ltoptions.m4'
| libtoolize: copying file `m4/ltsugar.m4'
| libtoolize: copying file `m4/ltversion.m4'
| libtoolize: copying file `m4/lt~obsolete.m4'
| /media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-
native-2.17-r35/util-linux-ng-2.17/m4/gettext.m4:430: warning: macro
`AM_LC_MESSAGES' not found in library
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoconf --include=/media/Shared_FS/Ubuntu/
projects/beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-r35/util-
linux-ng-2.17/m4/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --include=/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force --warnings=cross
| configure.ac:243: warning: AC_RUN_IFELSE called without default to
allow cross compiling
| ../../lib/autoconf/general.m4:2716: AC_RUN_IFELSE is expanded
from...
| ../../lib/m4sugar/m4sh.m4:598: AS_IF is expanded from...
| ../../lib/autoconf/general.m4:2697: _AC_RUN_IFELSE is expanded
from...
| ../../lib/autoconf/general.m4:1999: AC_CACHE_VAL is expanded from...
| ../../lib/autoconf/general.m4:2020: AC_CACHE_CHECK is expanded
from...
| aclocal.m4:11116: AX_CHECK_TLS is expanded from...
| configure.ac:243: the top level
| autoreconf: running: /media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/build/tmp-angstrom_2008_1/
sysroots/i686-linux/usr/bin/autoheader --include=/media/Shared_FS/
Ubuntu/projects/beagleboard/angstrom/clone/angstrom-setup-scripts/
build/tmp-angstrom_2008_1/work/i686-linux/util-linux-ng-native-2.17-
r35/util-linux-ng-2.17/m4/ --include=/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/share/aclocal-1.11 --include=/
media/Shared_FS/Ubuntu/projects/beagleboard/angstrom/clone/angstrom-
setup-scripts/build/tmp-angstrom_2008_1/sysroots/i686-linux/usr/share/
aclocal --force --warnings=cross
| autoreconf: failed to run /media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/build/tmp-
angstrom_2008_1/sysroots/i686-linux/usr/bin/autoheader: No such file
or directory
| FATAL: autoreconf execution failed.
| ERROR: Function do_configure failed
NOTE: package util-linux-ng-native-2.17-r35: task do_configure: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb do_configure failed
ERROR: Task 665 (virtual:native:/media/Shared_FS/Ubuntu/projects/
beagleboard/angstrom/clone/angstrom-setup-scripts/sources/openembedded/
recipes/util-linux-ng/util-linux-ng_2.17.bb, do_configure) failed with
exit code 1
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
bison/bison_2.4.3.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
util-linux-ng/util-linux-ng_2.17.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
bison/bison_2.4.3.bb' failed
ERROR: 'virtual:native:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts/sources/openembedded/recipes/
util-linux-ng/util-linux-ng_2.17.bb' failed
dell-xps@dell-xps-laptop:/media/Shared_FS/Ubuntu/projects/beagleboard/
angstrom/clone/angstrom-setup-scripts$ MACHINE=beagleboard ./oebb.sh
bitbake angstrom-gnome-image
On Jan 11, 2:35 am, Koen Kooi <k...@beagleboard.org> wrote:
> Hi,
>
> Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
> Europe:http://www.angstrom-distribution.org/demo/beagleboard/Angstrom-Beagle...
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> Instructions on how to untar it can be found at:
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
> 1) go tohttp://narcissus.angstrom-distribution.org/
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
Jim Stiernberg
Jan 15, 2011, 2:00:41 PM1/15/11
to Beagle Board
Thanks Koen! I, for one, really appreciate this because I was unable
to get Nacissus to work... I'm sure it's something retarded I'm doing
wrong or possibly a busy time of the day that I'm trying to use it. It
never gets past one green check mark (even after 2+ hours).. anyway,
cheers for the demo image. I'm going to try it out soon.
-Jim
On Jan 11, 4:35 am, Koen Kooi <k...@beagleboard.org> wrote:
> Hi,
>
> Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
to get Nacissus to work... I'm sure it's something retarded I'm doing
wrong or possibly a busy time of the day that I'm trying to use it. It
never gets past one green check mark (even after 2+ hours).. anyway,
cheers for the demo image. I'm going to try it out soon.
-Jim
On Jan 11, 4:35 am, Koen Kooi <k...@beagleboard.org> wrote:
> Hi,
>
> Jason asked me to create an new demo image for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
> Europe:http://www.angstrom-distribution.org/demo/beagleboard/Angstrom-Beagle...
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> Instructions on how to untar it can be found at:
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
> 1) go tohttp://narcissus.angstrom-distribution.org/
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
> 2) select 'beagleboard' as machine
> 3) select 'X11' as user environment
> 4) select GNOME
> 5) select screen, powertop, mplayer, midori, TI texture streaming demo for X11 and Texas Instruments Gstreamer plugins
> 6) click 'Build me!'
>
> If you want to recreate it using OE:
>
> 1) following instructions athttp://www.angstrom-distribution.org/building-angstrom
> 3) select 'X11' as user environment
> 4) select GNOME
> 5) select screen, powertop, mplayer, midori, TI texture streaming demo for X11 and Texas Instruments Gstreamer plugins
> 6) click 'Build me!'
>
> If you want to recreate it using OE:
>
cwall
Jan 16, 2011, 8:23:42 AM1/16/11
to Beagle Board
Hi Koen
Tried out the new demo image and noticed the resolution is at
640x480, where the old demo image was 1280x720. Tried the "screen
gui" but that would not give me any choice for other screen settings.
Then I went looking for the screen config files in X11 but could not
find the one which would change the screen resolution. Should the
Angstrom setup be auto detecting the monitor? Looked in the Angstrom
manual but that did not help.
Any hints would be appreciated.
Carl
> Jason asked me to create an newdemoimage for the people that haven't discovered narcissus yet, so here it is.
Tried out the new demo image and noticed the resolution is at
640x480, where the old demo image was 1280x720. Tried the "screen
gui" but that would not give me any choice for other screen settings.
Then I went looking for the screen config files in X11 but could not
find the one which would change the screen resolution. Should the
Angstrom setup be auto detecting the monitor? Looked in the Angstrom
manual but that did not help.
Any hints would be appreciated.
Carl
> Jason asked me to create an newdemoimage for the people that haven't discovered narcissus yet, so here it is.
>
> You can download it from these two sites:
>
> You can download it from these two sites:
>
> Europe:http://www.angstrom-distribution.org/demo/beagleboard/Angstrom-Beagle...
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> US West Coast:http://narcissus.angstrom-distribution.org/static/beagleboard/Angstro...
>
> Instructions on how to untar it can be found at:
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
> 1) go tohttp://narcissus.angstrom-distribution.org/
>
> http://www.angstrom-distribution.org/demo/beagleboard/
>
> If you want to recreate it using narcissus:
>
> 2) select 'beagleboard' as machine
> 3) select 'X11' as user environment
> 4) select GNOME
> 5) select screen, powertop, mplayer, midori, TI texture streamingdemofor X11 and Texas Instruments Gstreamer plugins
> 3) select 'X11' as user environment
> 4) select GNOME
> 6) click 'Build me!'
>
> If you want to recreate it using OE:
>
>
> If you want to recreate it using OE:
>
> 1) following instructions athttp://www.angstrom-distribution.org/building-angstrom
> 2) MACHINE=beagleboard ./oebb.sh bitbakeangstrom-gnome-image
>
> 2) MACHINE=beagleboard ./oebb.sh bitbakeangstrom-gnome-image
>
Koen Kooi
Jan 16, 2011, 8:55:16 AM1/16/11
to beagl...@googlegroups.com
Op 16 jan 2011, om 14:23 heeft cwall het volgende geschreven:
> Hi Koen
> Tried out the new demo image and noticed the resolution is at
> 640x480, where the old demo image was 1280x720
resolution is set using a boot.scr in the fat partition, you can do 'opkg update ; opkg install angstrom-uboot-scripts' to get a few example scripts.
regards,
Koen
Rico & Gaby Naef
Jan 17, 2011, 6:29:43 PM1/17/11
to Beagle Board
As far as I know you have to do it at boot time.
mkimage is the command to use. It will generate a new boot file with
the prefered resolution.
That's why it is named a demo file, just a taster on what could be.
There are other things like filesharing you have to manual.
You have to look up the references to it.
--
Rico & Gaby Naef
!!!!! Achtung !!!!!
Neue Adresse famil...@bluewin.ch
*** ********
Maxim Podbereznyy
Jan 29, 2011, 3:17:04 PM1/29/11
to beagl...@googlegroups.com
Hello!
The latest demo does not have 3D demo applications. Can I install them and how? Please advise
Max
The latest demo does not have 3D demo applications. Can I install them and how? Please advise
Max
2011/1/18 Rico & Gaby Naef <famil...@bluewin.ch>
--
You received this message because you are subscribed to the Google Groups "Beagle Board" group.
To post to this group, send email to beagl...@googlegroups.com.
To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
Koen Kooi
Jan 29, 2011, 3:28:22 PM1/29/11
to beagl...@googlegroups.com
Yes, with opkg
lchile
Jan 31, 2011, 5:20:42 AM1/31/11
to Beagle Board
Can I just say this new image is just great. Everything is really
responsive and fast, especially Midori.
Thanks to Koen and all the rest of the team contributing.
On Jan 29, 8:28 pm, Koen Kooi <k...@beagleboard.org> wrote:
> Yes, with opkg
>
> Op 29 jan 2011, om 21:17 heeft Maxim Podbereznyy het volgende geschreven:
>
>
>
> > Hello!
>
> > The latest demo does not have 3D demo applications. Can I install them and how? Please advise
>
> > Max
>
> > 2011/1/18 Rico & Gaby Naef <familyn...@bluewin.ch>
> > > 640x480, where the old demoimagewas 1280x720. Tried the "screen
> > Neue Adresse familyn...@bluewin.ch
>
> - Show quoted text -
responsive and fast, especially Midori.
Thanks to Koen and all the rest of the team contributing.
On Jan 29, 8:28 pm, Koen Kooi <k...@beagleboard.org> wrote:
> Yes, with opkg
>
> Op 29 jan 2011, om 21:17 heeft Maxim Podbereznyy het volgende geschreven:
>
>
>
> > Hello!
>
> > The latest demo does not have 3D demo applications. Can I install them and how? Please advise
>
> > Max
>
> > As far as I know you have to do it at boot time.
>
> > mkimage is the command to use. It will generate anewboot file with
>
> > the prefered resolution.
> > That's why it is named a demo file, just a taster on what could be.
> > There are other things like filesharing you have to manual.
> > You have to look up the references to it.
>
> > > Hi Koen
> > > Tried out thenewdemoimageand noticed the resolution is at
> > That's why it is named a demo file, just a taster on what could be.
> > There are other things like filesharing you have to manual.
> > You have to look up the references to it.
>
> > > Hi Koen
> > > 640x480, where the old demoimagewas 1280x720. Tried the "screen
> > > gui" but that would not give me any choice for other screen settings.
> > > Then I went looking for the screen config files in X11 but could not
> > > find the one which would change the screen resolution. Should the
> > >Angstromsetup be auto detecting the monitor? Looked in theAngstrom
> > > Then I went looking for the screen config files in X11 but could not
> > > find the one which would change the screen resolution. Should the
> > *** ********
>
> > --
> > You received this message because you are subscribed to the Google Groups "Beagle Board" group.
> > To post to this group, send email to beagl...@googlegroups.com.
> > To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/beagleboard?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Beagle Board" group.
> > To post to this group, send email to beagl...@googlegroups.com.
> > To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Beagle Board" group.
> > To post to this group, send email to beagl...@googlegroups.com.
> > To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/beagleboard?hl=en.- Hide quoted text -
> > --
> > You received this message because you are subscribed to the Google Groups "Beagle Board" group.
> > To post to this group, send email to beagl...@googlegroups.com.
> > To unsubscribe from this group, send email to beagleboard...@googlegroups.com.
>
> - Show quoted text -
Maxim Podbereznyy
Jan 31, 2011, 5:34:06 AM1/31/11
to beagl...@googlegroups.com
Dear Koen,
can you specify the exact command to install 3D demo? I tried "opkh install libgles*" but new application do not appear.
P.S. Midori: works very unstable, often crashes almost immediately. Installed Firefox and everything is fine now.
can you specify the exact command to install 3D demo? I tried "opkh install libgles*" but new application do not appear.
P.S. Midori: works very unstable, often crashes almost immediately. Installed Firefox and everything is fine now.
2011/1/31 lchile <beaufo...@gmail.com>
Reply all
Reply to author
Forward
0 new messages