Re: [beagleboard] Error when building Angstrom with Open Embedded

[Koen Kooi]

Op 21 mei 2009, om 21:04 heeft Breimer.B het volgende geschreven:
>
> ERROR: see log in /home/ben/oe/tmp/work/beagleboard-angstrom-linux-
> gnueabi/console-image-1.0-r0/temp/log.do_rootfs.1205

You need to look for the actual error in there.

regards,

Koen

[jas...@gmail.com]

Hi Ben - I am following the same instructions as you (at what seems
like the same time) and I am experiencing the exact same problem, the
files generated, your terminal session output and the log file error
are all the same.
I have tried a few things including a clean and then a build and it
still fails with the exact same error.
I don’t have any suggestions as how to move on from this point I just
wanted you to know that you are not the only one with this issue.

On May 21, 8:34 pm, "Breimer.B" <breime...@gmail.com> wrote:
> Thanks for the quick response,  I forgot to add that part into the
> last post
>
> I went to that log and found where I think the error is...
>
>   File "/home/ben/oe/tmp/staging/x86_64-linux//usr/lib/python2.6/
> tarfile.py", line 1649, in open
>       raise ReadError("file could not be opened successfully")
> tarfile.Read
>   Error: file could not be opened successfully
>
> I looked up that file and I couldn't see anything wrong with it, I
> tried to reinstall the python2.6 package but to no avail.
> Any suggestions on what I might do to fix this?
> Thanks
> Ben Breimer

> >  PGP.sig
> > < 1KViewDownload

[jas...@gmail.com]

I found this posting on another forum…

http://www.nabble.com/Error-build-omap3-console-image:-control.tar.gz-not-found-td23060663.html

…and after following this snippet of advice it now builds without
errors…

Adding "--with-zlib" to the EXTRA_OECONF variable in /
org.openembedded.dev/recipes/python/python.inc and rebuilding python-
native (bitbake -c clean python-native; bitbake python-native) seems
to solve the problem for me.

…since I am a novice with oe I am not entirely sure if this is a
complete fix, but it does get me over this hurdle and I now have my
beagleboard booting with this build image :-)

On May 21, 8:34 pm, "Breimer.B" <breime...@gmail.com> wrote:
> Thanks for the quick response,  I forgot to add that part into the
> last post
>
> I went to that log and found where I think the error is...
>
>   File "/home/ben/oe/tmp/staging/x86_64-linux//usr/lib/python2.6/
> tarfile.py", line 1649, in open
>       raise ReadError("file could not be opened successfully")
> tarfile.Read
>   Error: file could not be opened successfully
>
> I looked up that file and I couldn't see anything wrong with it, I
> tried to reinstall the python2.6 package but to no avail.
> Any suggestions on what I might do to fix this?
> Thanks
> Ben Breimer
>
> On May 21, 3:10 pm, Koen Kooi <k...@beagleboard.org> wrote:
>

> >  PGP.sig
> > < 1KViewDownload