On May 17, 3:44 am, Koen Kooi <
k...@beagleboard.org> wrote:
> Op 15 mei 2011, om 11:32 heeft Steve Gigijoe het volgende geschreven:
>
> > I'm following the instruction below to build kernel & everything.
>
> >
http://processors.wiki.ti.com/index.php/DVSDK_4.x_FAQ#How_to_build_an...
>
> Again, don't follow those instructions, followhttp://
www.angstrom-distribution.org/building-angstrom
>
>
>
> > The bulid script setup-dvsdk-4-01-beaglexm-110126-fix.sh patch the
> > kernel source fromhttp://
cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/linux...
>
> > As I know, these patchs should be including bugfixs you mention.
>
> They miss the aptina fixes he needs.
>
I have build the latest linux-omap-psp-2.6.32 (version "c"), that have
already the aptina patch in it, and have a similar issue.
I have previously manually patched (and fixed the small issues) the
previous omap-psp-2.6.32 (version"a") with the aptina patch, with this
same issue:
Under load (and does not need to be that high network load, although
CPU is near 100% and the mt9p031 is delivering some 3 whole frames/s)
the usb ethernet dies. dmesg show:
[ 122.975433] Bluetooth: RFCOMM ver 1.11
[ 126.211059] usb0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 134.863739] usb0: no IPv6 routers present
[ 198.425903] Restoring csi2 context
[ 198.801269] Saving csi2 context
[ 198.801727] Restoring csi2 context
[ 199.181030] Saving csi2 context
[ 199.182281] Restoring csi2 context
[ 252.057983] omap3isp omap3isp: omap34xx_isp_isr: sbl overflow,
sbl_pcr = 00400000
If I do a ifconfig usb0 down and then up, dsmeg adds:
[ 343.715393] usb0: Failed to write register index 0x00000014
[ 343.721008] usb0: Failed to write HW_CFG_LRST_ bit in HW_CFG
register, ret = -110
This is the same message lyakh posted in february:
http://www.beagleboard.org/irclogs/index.php?date=2011-02-08
Do someone have any suggestion for that?
I tried the 2.6.39 that was updated this weekend, but that does not
even boot on my XM.
Regards,
Ivan