Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Completely O.T. Craig Thomson
16 views
Skip to first unread message
George W Frost
May 24, 2012, 5:25:04 AM5/24/12
to
I know this is off topic, as noted in the header, but,
I am really astounded that Craig Thomson, has appeared to try to make out
that the transactions of the credit card has been highjacked.
Now, before anyone starts to cry things down .
Let me say, that an Escort service or a Prostitution service is totally
legal in Australia and has been for quite a few years
so, why try to denigrate the whole topic.
If he went to a brothel or had a girl or boy come to his premises,
that's okay in my book,
so just own up to the credit card charge and the allegations will stop,
or at least slow down and maybe forgotten.
Then maybe Channel 9 will save themselves an alleged $60,000
--
--
Sent from my Verizon Wireless Phone
and Zumax freeware
I am really astounded that Craig Thomson, has appeared to try to make out
that the transactions of the credit card has been highjacked.
Now, before anyone starts to cry things down .
Let me say, that an Escort service or a Prostitution service is totally
legal in Australia and has been for quite a few years
so, why try to denigrate the whole topic.
If he went to a brothel or had a girl or boy come to his premises,
that's okay in my book,
so just own up to the credit card charge and the allegations will stop,
or at least slow down and maybe forgotten.
Then maybe Channel 9 will save themselves an alleged $60,000
--
--
Sent from my Verizon Wireless Phone
and Zumax freeware
atec77
May 24, 2012, 8:05:41 AM5/24/12
to
On 24/05/2012 7:25 PM, George W Frost wrote:
On 24/05/2012 7:16 PM, Krypsis wrote:
> On 24/05/2012 2:38 PM, Damian wrote:
>> "Krypsis"<kry...@optusnet.com.au> wrote in message
>> news:jpjion$rct$1...@dont-email.me...
>>> On 22/05/2012 2:47 PM, Damian wrote:
>>>> "Rob"<mesa...@gmail.com> wrote in message
>>>> news:4fba...@dnews.tpgi.com.au...
>>>>> On 21/05/2012 11:49 PM, Damian wrote:
>>>>>> "Rod Speed"<rod.sp...@gmail.com> wrote in message
>>>>>> news:a1ui2g...@mid.individual.net...
>>>>>>> Damian<damian_a...@yahoo.com.au> wrote
>>>>>>>
>>>>>>>> Hi guys,
>>>>>>>
>>>>>>> None of those here, just us animals...
>>>>>>>
>>>>>>>> Just ended with the worst ever problem with my win xp machine. It
>>>>>>>> boots
>>>>>>>> up goes upto the point just before windows logon screen
>>>>>>>> appears(total
>>>>>>>> blue screen) and then crashed and restarts and goes the cycle
>>>>>>>> forever.
>>>>>>>
>>>>>>> That’s normally a hardware problem and it’s the driver for it that’s
>>>>>>> crashing and causing the reboot. Try a logged boot from the F8 menu
>>>>>>> to see which driver it is, and so the hardware that’s got a problem.
>>>>>>>
>>>>>>>> I can boot into safe mode.
>>>>>>>
>>>>>>> Which is more evidence that it’s a hardware problem.
>>>>>>>
>>>>>>> That driver isnt being loaded in safe mode.
>>>>>>>
>>>>>>>> Overall, it's booting pretty slow since the problem started.
>>>>>>>
>>>>>>> More evidence of a hardware problem, it takes the driver
>>>>>>> some time to crash badly enough to produce the reboot.
>>>>>>>
>>>>>>>> I tried windows recovery installtion, but the same problem.
>>>>>>>> couldn't
>>>>>>>> start to finish off the recovery installtion.
>>>>>>>
>>>>>>>> Then I did the registry recovery using recovery console, replacing
>>>>>>>> registry system files with files from an earlier restore point and
>>>>>>>> still
>>>>>>>> the same
>>>>>>>
>>>>>>> Which means its not just an updated driver that’s producing the
>>>>>>> reboot.
>>>>>>>
>>>>>>>> I'm running service pack 3 on it.
>>>>>>>
>>>>>>> Have been running fine with sp3 for a while ? Very likely you have.
>>>>>>>
>>>>>>>> I haven't got a clue what caused the problem
>>>>>>>
>>>>>>> Likely it’s a hardware problem that’s developed.
>>>>>>>
>>>>>>>> and how to fix it.
>>>>>>>
>>>>>>> Identify the hardware that’s the problem
>>>>>>> and replace if its not on the motherboard.
>>>>>>>>
>>>>>> Hi Rod,
>>>>>> Yes, sp3 is fine, I don't think it caused any drama. I've been
>>>>>> experimenting
>>>>>> with some crapware lately to get some work done quickly and that
>>>>>> may be
>>>>>> one
>>>>>> of the culprits. I think it's hardware problem too, at least for the
>>>>>> most
>>>>>> part. It's that it hasn't been easy to spot it. I think i'm going to
>>>>>> pull
>>>>>> all the cards one by one and start with the basic setup and try to
>>>>>> narrow
>>>>>> it.
>>>>>> Hard drive came up all good with seatools tests(long drive test as
>>>>>> well).
>>>>>> That doesn' t mean the drive is good, does it?!
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>
>>>>> Check the ram with MEM test86 then whilst inside Have a good look at
>>>>> the
>>>>> capacitors on the MB and see if any have popped.
>>>>>
>>>>> Does not seem to be the system or the video card.
>>>>>
>>>>>
>>>> I don't think it's the video card. It's dual monitor video card. but
>>>> works
>>>> fine when I tested it. I'm going to do the memtest now. I couldn't see
>>>> any
>>>> burst capacitors on the video card or motherboard. physically it looks
>>>> clean
>>>> and nice.
>>>>
>>>>
>>> I have a couple of motherboards here, Gigabyte IIRC, which have a couple
>>> of capacitors on them that are bulging at the top. They are working
>>> OK at
>>> the moment, no issues, but they could go at any time. Might, as an
>>> experiment, have a go at replacing the capacitors, 2 per board. The ones
>>> that are failing are brown in colour and different from all the
>>> others on
>>> the board.
>>>
>>> --
>>>
>>> Krypsis
>>>>
>> I think you need a good soldering iron with fine tip.
>>
>>
>
> Got a couple of temperature controlled soldering irons with fine tips.
>
> Better eyesight than I have would be a bonus! ;-)
>
--
X-No-Archive: Yes
Misappropriation of union funds is kinda serious , getting caught in
multiple lies is kinda stupid
now resigning and saving face is a politicians mistake
--
X-No-Archive: Yes
On 24/05/2012 7:16 PM, Krypsis wrote:
> On 24/05/2012 2:38 PM, Damian wrote:
>> "Krypsis"<kry...@optusnet.com.au> wrote in message
>> news:jpjion$rct$1...@dont-email.me...
>>> On 22/05/2012 2:47 PM, Damian wrote:
>>>> "Rob"<mesa...@gmail.com> wrote in message
>>>> news:4fba...@dnews.tpgi.com.au...
>>>>> On 21/05/2012 11:49 PM, Damian wrote:
>>>>>> "Rod Speed"<rod.sp...@gmail.com> wrote in message
>>>>>> news:a1ui2g...@mid.individual.net...
>>>>>>> Damian<damian_a...@yahoo.com.au> wrote
>>>>>>>
>>>>>>>> Hi guys,
>>>>>>>
>>>>>>> None of those here, just us animals...
>>>>>>>
>>>>>>>> Just ended with the worst ever problem with my win xp machine. It
>>>>>>>> boots
>>>>>>>> up goes upto the point just before windows logon screen
>>>>>>>> appears(total
>>>>>>>> blue screen) and then crashed and restarts and goes the cycle
>>>>>>>> forever.
>>>>>>>
>>>>>>> That’s normally a hardware problem and it’s the driver for it that’s
>>>>>>> crashing and causing the reboot. Try a logged boot from the F8 menu
>>>>>>> to see which driver it is, and so the hardware that’s got a problem.
>>>>>>>
>>>>>>>> I can boot into safe mode.
>>>>>>>
>>>>>>> Which is more evidence that it’s a hardware problem.
>>>>>>>
>>>>>>> That driver isnt being loaded in safe mode.
>>>>>>>
>>>>>>>> Overall, it's booting pretty slow since the problem started.
>>>>>>>
>>>>>>> More evidence of a hardware problem, it takes the driver
>>>>>>> some time to crash badly enough to produce the reboot.
>>>>>>>
>>>>>>>> I tried windows recovery installtion, but the same problem.
>>>>>>>> couldn't
>>>>>>>> start to finish off the recovery installtion.
>>>>>>>
>>>>>>>> Then I did the registry recovery using recovery console, replacing
>>>>>>>> registry system files with files from an earlier restore point and
>>>>>>>> still
>>>>>>>> the same
>>>>>>>
>>>>>>> Which means its not just an updated driver that’s producing the
>>>>>>> reboot.
>>>>>>>
>>>>>>>> I'm running service pack 3 on it.
>>>>>>>
>>>>>>> Have been running fine with sp3 for a while ? Very likely you have.
>>>>>>>
>>>>>>>> I haven't got a clue what caused the problem
>>>>>>>
>>>>>>> Likely it’s a hardware problem that’s developed.
>>>>>>>
>>>>>>>> and how to fix it.
>>>>>>>
>>>>>>> Identify the hardware that’s the problem
>>>>>>> and replace if its not on the motherboard.
>>>>>>>>
>>>>>> Hi Rod,
>>>>>> Yes, sp3 is fine, I don't think it caused any drama. I've been
>>>>>> experimenting
>>>>>> with some crapware lately to get some work done quickly and that
>>>>>> may be
>>>>>> one
>>>>>> of the culprits. I think it's hardware problem too, at least for the
>>>>>> most
>>>>>> part. It's that it hasn't been easy to spot it. I think i'm going to
>>>>>> pull
>>>>>> all the cards one by one and start with the basic setup and try to
>>>>>> narrow
>>>>>> it.
>>>>>> Hard drive came up all good with seatools tests(long drive test as
>>>>>> well).
>>>>>> That doesn' t mean the drive is good, does it?!
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>
>>>>> Check the ram with MEM test86 then whilst inside Have a good look at
>>>>> the
>>>>> capacitors on the MB and see if any have popped.
>>>>>
>>>>> Does not seem to be the system or the video card.
>>>>>
>>>>>
>>>> I don't think it's the video card. It's dual monitor video card. but
>>>> works
>>>> fine when I tested it. I'm going to do the memtest now. I couldn't see
>>>> any
>>>> burst capacitors on the video card or motherboard. physically it looks
>>>> clean
>>>> and nice.
>>>>
>>>>
>>> I have a couple of motherboards here, Gigabyte IIRC, which have a couple
>>> of capacitors on them that are bulging at the top. They are working
>>> OK at
>>> the moment, no issues, but they could go at any time. Might, as an
>>> experiment, have a go at replacing the capacitors, 2 per board. The ones
>>> that are failing are brown in colour and different from all the
>>> others on
>>> the board.
>>>
>>> --
>>>
>>> Krypsis
>>>>
>> I think you need a good soldering iron with fine tip.
>>
>>
>
> Got a couple of temperature controlled soldering irons with fine tips.
>
> Better eyesight than I have would be a bonus! ;-)
>
--
X-No-Archive: Yes
multiple lies is kinda stupid
now resigning and saving face is a politicians mistake
--
X-No-Archive: Yes
CrazyCam
May 24, 2012, 6:06:33 PM5/24/12
to
On 05/24/12 7:25 PM, George W Frost wrote:
> I know this is off topic, as noted in the header, but,
> I am really astounded that Craig Thomson, has appeared to try to make out
> that the transactions of the credit card has been highjacked.
Well into the league of "the dog ate my homework".
> I know this is off topic, as noted in the header, but,
> I am really astounded that Craig Thomson, has appeared to try to make out
> that the transactions of the credit card has been highjacked.
> Now, before anyone starts to cry things down .
> Let me say, that an Escort service or a Prostitution service is totally
> legal in Australia and has been for quite a few years
> so, why try to denigrate the whole topic.
> If he went to a brothel or had a girl or boy come to his premises,
> that's okay in my book,
> so just own up to the credit card charge and the allegations will stop,
> or at least slow down and maybe forgotten.
young boys and/or girls, but I am pissed off that he used some of my
wife's money.
If I had his address, I'd send him a packet of razor blades in the hope
that he would cut his wrists, or throat.
regards,
CrazyCam
Diogenes
May 24, 2012, 6:32:29 PM5/24/12
to
Opposition) is alive and well...
He's been charged with nothng yet, found guilty of nothing yey, but
already we're talking of sending razor blades...
Well, done, gentlemen...
=================
Onya bike
Gerry
CrazyCam
May 24, 2012, 8:47:44 PM5/24/12
to
regards,
CrazyCam
captain anchovy
May 24, 2012, 10:21:03 PM5/24/12
to
Kevin Gleeson
May 25, 2012, 5:00:16 PM5/25/12
to
"Good work Labor, you've finally got someone onboard who CAN organise
a root in a brothel".
--
Kev
George W Frost
May 25, 2012, 6:42:26 PM5/25/12
to
"Kevin Gleeson" <keving...@imagine-it.com.au> wrote in message
news:vjsvr7tjnraanalna...@4ax.com...
how's the cold weather riding down in the Antarctic?
Kevin Gleeson
May 25, 2012, 8:32:20 PM5/25/12
to
--
Kev
The Old Bloke
May 26, 2012, 8:46:38 AM5/26/12
to
George W Frost
May 26, 2012, 6:16:44 PM5/26/12
to
--
Sent from my Verizon Wireless Phone
and Zumax freeware
news:p4k1s7losqo0vo89m...@4ax.com...
CrazyCam
May 26, 2012, 6:57:54 PM5/26/12
to
On 05/27/12 8:16 AM, George W Frost wrote:
>>> Saw a good post on FB the other day below a photo of Thomson:
>>> "Good work Labor, you've finally got someone onboard who CAN organise
>>> a root in a brothel".
>
>> I'll pay that one!!!
> But, he used someone else's money
Isn't that the traditional Trade Union and Labor way?
>>> Saw a good post on FB the other day below a photo of Thomson:
>>> "Good work Labor, you've finally got someone onboard who CAN organise
>>> a root in a brothel".
>
>> I'll pay that one!!!
> But, he used someone else's money
regards,
CrazyCam
atec77
May 26, 2012, 7:03:18 PM5/26/12
to
--
X-No-Archive: Yes
Zebee Johnstone
May 26, 2012, 7:27:55 PM5/26/12
to
In aus.motorcycles on Sun, 27 May 2012 08:57:54 +1000
It's certainly the traditional government way.
Zebee
Zebee
CrazyCam
May 27, 2012, 1:58:54 AM5/27/12
to
regards,
CrazyCam
schroda
Jun 18, 2012, 7:43:34 PM6/18/12
to
Have a look at the Jacksonvile articals on the independant website. http://www.independentaustralia.net/
There may be more to this than meets the eye.
F Murtz
Jun 18, 2012, 10:08:44 PM6/18/12
to
0 new messages