> -- > You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> > --
> > You received this message because you are subscribed to the Google
> Groups "ATXHS Discuss" group.
> > To post to this group, send email to atxhs-discuss@googlegroups.com.
> > To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> > For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
Four Kinects! How do you keep the Kinects from interfering with each other?
Or do you just get interference and clean it up when you're building the
mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <B...@tyler-labs.com> wrote:
> I have the scanning booth in place. Using 4 kinects and a rotating stage.
> I can do full body scans in < 30 seconds.
> Right now the mesh building is manual and taking several hours. But once
> it is automated this would work.
> Sent from my iPhone
> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <martinb...@gmail.com>
> wrote:
> > We have to do this-- a 3D printer photo booth.
> > --
> > You received this message because you are subscribed to the Google
> Groups "ATXHS Discuss" group.
> > To post to this group, send email to atxhs-discuss@googlegroups.com.
> > To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> > For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bran...@blanu.net<mailto:bran...@blanu.net>> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <martinb...@gmail.com<mailto:martinb...@gmail.com>> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
> To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss%2Bunsubscri be@googlegroups.com>.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss%2Bunsubscri be@googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <B...@tyler-labs.com<mailto:B...@tyler-labs.com>> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bran...@blanu.net<mailto:bran...@blanu.net>> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <martinb...@gmail.com<mailto:martinb...@gmail.com>> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
> To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss%2Bunsubscri be@googlegroups.com>.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss%2Bunsubscri be@googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
Yep. We need to do this. We'll have several 3D printers by the middle of next year. My mini-me will definitely be 28mm Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
> CAN support that is
> Sent from my iPhone
> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com<javascript:>> > wrote:
> Windows can't support up to four however it has to have pretty beefy > hardware
> Sent from my iPhone
> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net<javascript:>> > wrote:
> Four Kinects! How do you keep the Kinects from interfering with each > other? Or do you just get interference and clean it up when you're building > the mesh?
> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com<javascript:> > > wrote:
>> I have the scanning booth in place. Using 4 kinects and a rotating >> stage. I can do full body scans in < 30 seconds.
>> Right now the mesh building is manual and taking several hours. But once >> it is automated this would work.
>> Sent from my iPhone
>> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com<javascript:>> >> wrote:
>> > We have to do this-- a 3D printer photo booth.
>> > -- >> > You received this message because you are subscribed to the Google >> Groups "ATXHS Discuss" group. >> > To post to this group, send email to atxhs-...@googlegroups.com<javascript:> >> . >> > To unsubscribe from this group, send email to >> atxhs-discus...@googlegroups.com <javascript:>. >> > For more options, visit this group at >> http://groups.google.com/group/atxhs-discuss?hl=en.
>> -- >> You received this message because you are subscribed to the Google Groups >> "ATXHS Discuss" group. >> To post to this group, send email to atxhs-...@googlegroups.com<javascript:> >> . >> To unsubscribe from this group, send email to >> atxhs-discus...@googlegroups.com <javascript:>. >> For more options, visit this group at >> http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com<javascript:> > . > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com <javascript:>. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com<javascript:> > . > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com <javascript:>. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
The software I ended up with is KScan (http://www.kscan3d.com). It's made by 3D3 Solutions (http://www.3d3solutions.com) which is the system I was considering before. KScan is cheap ($300 as opposed to $15k for hardware and software) and runs with multiple scanners.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshallbvaug...@gmail.com<mailto:marshallbvaug...@gmail.com>> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com<javascript:>> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net<javascript:>> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com<javascript:>> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com<javascript:>> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/z0LwG5nJqcMJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <B...@tyler-labs.com> wrote:
> I do not yet have any video, but I can make something up.
> The short of it is that I have the kinects mounted vertically on a
> studio light pole and placed adjacent to the stage. With one high pointing
> downward, one at chest level, one at hip level and one around knee level.
> This does not quite capture the feet so I am still playing with placement
> and how much overlap is required in order to get the mesh.
> The software I ended up with is KScan (http://www.kscan3d.com). It's
> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system I
> was considering before. KScan is cheap ($300 as opposed to $15k for
> hardware and software) and runs with multiple scanners.
> I like KScan over reconstruct me because it has a much nicer interface
> along with the multi scanner support which reconstruct me does not have.
> The software was just released in Aug I think so there is still room for
> improvements.
> This is my version one setup, I have started looking at
> Arduino/Raspberry Pi options for collecting scan data to get rid of the
> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement.
> I would ultimately like to drive 16 - 20 scanners and create a sort of
> real-time scanning booth. Then it would be almost as quick to capture a
> whole body scan as it would be to click the shutter of a regular camera.
> On Nov 14, 2012, at 10:16 PM, Amishacker <marshallbvaug...@gmail.com>
> wrote:
> Yep. We need to do this. We'll have several 3D printers by the middle of
> next year.
> My mini-me will definitely be 28mm
> Bill, I would love to see your setup. Got any video?
> Fine detail scanners to compliment a kinect booth:
> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
>> CAN support that is
>> Sent from my iPhone
>> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
>> Windows can't support up to four however it has to have pretty beefy
>> hardware
>> Sent from my iPhone
>> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
>> Four Kinects! How do you keep the Kinects from interfering with each
>> other? Or do you just get interference and clean it up when you're building
>> the mesh?
>> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>>> I have the scanning booth in place. Using 4 kinects and a rotating
>>> stage. I can do full body scans in < 30 seconds.
>>> Right now the mesh building is manual and taking several hours. But once
>>> it is automated this would work.
>>> Sent from my iPhone
>>> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com>
>>> wrote:
>>> > We have to do this-- a 3D printer photo booth.
>>> > --
>>> > You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> > To post to this group, send email to atxhs-...@googlegroups.com**.
>>> > To unsubscribe from this group, send email to atxhs-discus...@**
>>> googlegroups.com.
>>> > For more options, visit this group at http://groups.google.com/** >>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com**.
>>> To unsubscribe from this group, send email to atxhs-discus...@**
>>> googlegroups.com.
>>> For more options, visit this group at http://groups.google.com/** >>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/atxhs-discuss/-/z0LwG5nJqcMJ.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com<mailto:m...@millerhooks.com>>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshallbvaug...@gmail.com<mailto:marshallbvaug...@gmail.com>> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/z0LwG5nJqcMJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss%2Bunsubscri be@googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture. I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
> A note about multiple scanners, they need to be plugged in such that > there is only one controller per root usb controller. It will not work > with a hub or more than one to a controller. I had to build a new box to > get 4 working.
> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com<javascript:>
> wrote:
> Wow! This software looks pretty great. I have a few kinects laying around > and previously I had some stuff rolled up with some open source tools.
> Very interested in seeing some video of your setup!
> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com<javascript:> > > wrote:
>> I do not yet have any video, but I can make something up.
>> The short of it is that I have the kinects mounted vertically on a >> studio light pole and placed adjacent to the stage. With one high pointing >> downward, one at chest level, one at hip level and one around knee level. >> This does not quite capture the feet so I am still playing with placement >> and how much overlap is required in order to get the mesh.
>> The software I ended up with is KScan (http://www.kscan3d.com). It's >> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system >> I was considering before. KScan is cheap ($300 as opposed to $15k for >> hardware and software) and runs with multiple scanners.
>> I like KScan over reconstruct me because it has a much nicer interface >> along with the multi scanner support which reconstruct me does not have. >> The software was just released in Aug I think so there is still room for >> improvements.
>> This is my version one setup, I have started looking at >> Arduino/Raspberry Pi options for collecting scan data to get rid of the >> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. >> I would ultimately like to drive 16 - 20 scanners and create a sort of >> real-time scanning booth. Then it would be almost as quick to capture a >> whole body scan as it would be to click the shutter of a regular camera.
>> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com<javascript:>> >> wrote:
>> Yep. We need to do this. We'll have several 3D printers by the middle >> of next year. >> My mini-me will definitely be 28mm >> Bill, I would love to see your setup. Got any video?
>> Fine detail scanners to compliment a kinect booth:
>> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
>>> CAN support that is
>>> Sent from my iPhone
>>> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
>>> Windows can't support up to four however it has to have pretty beefy >>> hardware
>>> Sent from my iPhone
>>> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
>>> Four Kinects! How do you keep the Kinects from interfering with each >>> other? Or do you just get interference and clean it up when you're building >>> the mesh?
>>> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com>wrote:
>>>> I have the scanning booth in place. Using 4 kinects and a rotating >>>> stage. I can do full body scans in < 30 seconds.
>>>> Right now the mesh building is manual and taking several hours. But >>>> once it is automated this would work.
>>>> Sent from my iPhone
>>>> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> >>>> wrote:
>>>> > We have to do this-- a 3D printer photo booth.
>>>> > -- >>>> > You received this message because you are subscribed to the Google >>>> Groups "ATXHS Discuss" group. >>>> > To post to this group, send email to atxhs-...@googlegroups.com**. >>>> > To unsubscribe from this group, send email to atxhs-discus...@** >>>> googlegroups.com. >>>> > For more options, visit this group at http://groups.google.com/** >>>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> >>>> .
>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ATXHS Discuss" group. >>>> To post to this group, send email to atxhs-...@googlegroups.com**. >>>> To unsubscribe from this group, send email to atxhs-discus...@** >>>> googlegroups.com. >>>> For more options, visit this group at http://groups.google.com/** >>>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> >>>> .
>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ATXHS Discuss" group. >>> To post to this group, send email to atxhs-...@googlegroups.com**. >>> To unsubscribe from this group, send email to atxhs-discus...@** >>> googlegroups.com. >>> For more options, visit this group at http://groups.google.com/** >>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> >>> .
>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ATXHS Discuss" group. >>> To post to this group, send email to atxhs-...@googlegroups.com**. >>> To unsubscribe from this group, send email to atxhs-discus...@** >>> googlegroups.com. >>> For more options, visit this group at http://groups.google.com/** >>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> >>> .
>> -- >> You received this message because you are subscribed to the Google Groups >> "ATXHS Discuss" group. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/atxhs-discuss/-/z0LwG5nJqcMJ. >> To post to this group, send email to atxhs-...@googlegroups.com<javascript:> >> . >> To unsubscribe from this group, send email to >> atxhs-discus...@googlegroups.com <javascript:>. >> For more options, visit this group at >> http://groups.google.com/group/atxhs-discuss?hl=en.
>> -- >> You received this message because you are subscribed to the Google Groups >> "ATXHS Discuss" group. >> To post to this group, send email to atxhs-...@googlegroups.com<javascript:> >> . >> To unsubscribe from this group, send email to >> atxhs-discus...@googlegroups.com <javascript:>. >> For more options, visit this group at >> http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com<javascript:> > . > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com <javascript:>. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshallbvaug...@gmail.com<mailto:marshallbvaug...@gmail.com>> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com<javascript:>>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com<javascript:>> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com<javascript:>> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/z0LwG5nJqcMJ.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
a pic of the setup and the prints as well
[cid:598f5437-622c-4d86-93bf-366f35943...@exch026.domain.local]
On Nov 15, 2012, at 10:35 AM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>> wrote:
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshallbvaug...@gmail.com<mailto:marshallbvaug...@gmail.com>> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
On Nov 15, 2012, at 10:35 AM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>> wrote:
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshallbvaug...@gmail.com<mailto:marshallbvaug...@gmail.com>> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
On Mon, Nov 19, 2012 at 10:40 PM, Bill Tyler <B...@tyler-labs.com> wrote:
> forgot one
> On Nov 15, 2012, at 10:35 AM, Bill Tyler <B...@tyler-labs.com> wrote:
> Sure thing, I am probably going to set it up in a small office space I
> have in Round Rock if you're (or anyone else is) interested in checking it
> out.
> I have seen or heard reference to the overlap needing to be approx. 30%.
> But I am experimenting with that still.
> On Nov 15, 2012, at 9:21 AM, Amishacker <marshallbvaug...@gmail.com>
> wrote:
> Interesting. Given the amount of captures they showed in the demonstration
> it would be possible to get a large array to do that in one capture.
> I don't see any guideline about how much of a mesh overlap is required to
> stitch the images though.
> Any interest in bringing rig 1 to the hackerspace for a photo-op? (once
> open)
> On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
> A note about multiple scanners, they need to be plugged in such that there
> is only one controller per root usb controller. It will not work with a
> hub or more than one to a controller. I had to build a new box to get 4
> working.
> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
> wrote:
> Wow! This software looks pretty great. I have a few kinects laying around
> and previously I had some stuff rolled up with some open source tools.
> Very interested in seeing some video of your setup!
> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
> I do not yet have any video, but I can make something up.
> The short of it is that I have the kinects mounted vertically on a
> studio light pole and placed adjacent to the stage. With one high pointing
> downward, one at chest level, one at hip level and one around knee level.
> This does not quite capture the feet so I am still playing with placement
> and how much overlap is required in order to get the mesh.
> The software I ended up with is KScan (http://www.kscan3d.com). It's
> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system I
> was considering before. KScan is cheap ($300 as opposed to $15k for
> hardware and software) and runs with multiple scanners.
> I like KScan over reconstruct me because it has a much nicer interface
> along with the multi scanner support which reconstruct me does not have.
> The software was just released in Aug I think so there is still room for
> improvements.
> This is my version one setup, I have started looking at
> Arduino/Raspberry Pi options for collecting scan data to get rid of the
> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement.
> I would ultimately like to drive 16 - 20 scanners and create a sort of
> real-time scanning booth. Then it would be almost as quick to capture a
> whole body scan as it would be to click the shutter of a regular camera.
> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
> Yep. We need to do this. We'll have several 3D printers by the middle of
> next year.
> My mini-me will definitely be 28mm
> Bill, I would love to see your setup. Got any video?
> Fine detail scanners to compliment a kinect booth:
> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
> CAN support that is
> Sent from my iPhone
> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
> Windows can't support up to four however it has to have pretty beefy
> hardware
> Sent from my iPhone
> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
> Four Kinects! How do you keep the Kinects from interfering with each
> other? Or do you just get interference and clean it up when you're building
> the mesh?
> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
> I have the scanning booth in place. Using 4 kinects and a rotating stage.
> I can do full body scans in < 30 seconds.
> Right now the mesh building is manual and taking several hours. But once
> it is automated this would work.
> Sent from my iPhone
> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com>
> wrote:
> > We have to do this-- a 3D printer photo booth.
> > --
> > You received this message because you are subscribed to the Google
> Groups "ATXHS Discuss" group.
> > To post to this group, send email to atxhs-...@googlegroups.com**.
> > To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> > For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.com.
> For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
> .
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.com.
> For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
> .
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
You really need to put together a video showing the scan, the conversion,
the printing, and the final process. If you want...get with me and we can
put something together. (I have Sony Vegas HD Suite)
Jerry
*Askjerry... everyone else does.*
Visit me online at http://askjerry.info *See my projects, video links, tutorials, and blog today.*
> On Nov 15, 2012, at 10:35 AM, Bill Tyler <B...@tyler-labs.com> wrote:
> Sure thing, I am probably going to set it up in a small office space I
> have in Round Rock if you're (or anyone else is) interested in checking it
> out.
> I have seen or heard reference to the overlap needing to be approx. 30%.
> But I am experimenting with that still.
> On Nov 15, 2012, at 9:21 AM, Amishacker <marshallbvaug...@gmail.com>
> wrote:
> Interesting. Given the amount of captures they showed in the demonstration
> it would be possible to get a large array to do that in one capture.
> I don't see any guideline about how much of a mesh overlap is required to
> stitch the images though.
> Any interest in bringing rig 1 to the hackerspace for a photo-op? (once
> open)
> On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
> A note about multiple scanners, they need to be plugged in such that there
> is only one controller per root usb controller. It will not work with a
> hub or more than one to a controller. I had to build a new box to get 4
> working.
> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
> wrote:
> Wow! This software looks pretty great. I have a few kinects laying around
> and previously I had some stuff rolled up with some open source tools.
> Very interested in seeing some video of your setup!
> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
> I do not yet have any video, but I can make something up.
> The short of it is that I have the kinects mounted vertically on a
> studio light pole and placed adjacent to the stage. With one high pointing
> downward, one at chest level, one at hip level and one around knee level.
> This does not quite capture the feet so I am still playing with placement
> and how much overlap is required in order to get the mesh.
> The software I ended up with is KScan (http://www.kscan3d.com). It's
> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system I
> was considering before. KScan is cheap ($300 as opposed to $15k for
> hardware and software) and runs with multiple scanners.
> I like KScan over reconstruct me because it has a much nicer interface
> along with the multi scanner support which reconstruct me does not have.
> The software was just released in Aug I think so there is still room for
> improvements.
> This is my version one setup, I have started looking at
> Arduino/Raspberry Pi options for collecting scan data to get rid of the
> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement.
> I would ultimately like to drive 16 - 20 scanners and create a sort of
> real-time scanning booth. Then it would be almost as quick to capture a
> whole body scan as it would be to click the shutter of a regular camera.
> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
> Yep. We need to do this. We'll have several 3D printers by the middle of
> next year.
> My mini-me will definitely be 28mm
> Bill, I would love to see your setup. Got any video?
> Fine detail scanners to compliment a kinect booth:
> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
> CAN support that is
> Sent from my iPhone
> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
> Windows can't support up to four however it has to have pretty beefy
> hardware
> Sent from my iPhone
> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
> Four Kinects! How do you keep the Kinects from interfering with each
> other? Or do you just get interference and clean it up when you're building
> the mesh?
> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
> I have the scanning booth in place. Using 4 kinects and a rotating stage.
> I can do full body scans in < 30 seconds.
> Right now the mesh building is manual and taking several hours. But once
> it is automated this would work.
> Sent from my iPhone
> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com>
> wrote:
> > We have to do this-- a 3D printer photo booth.
> > --
> > You received this message because you are subscribed to the Google
> Groups "ATXHS Discuss" group.
> > To post to this group, send email to atxhs-...@googlegroups.com**.
> > To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> > For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.**com.
> For more options, visit this group at http://groups.google.com/**group** > /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.com.
> For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
> .
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com**.
> To unsubscribe from this group, send email to atxhs-discus...@**
> googlegroups.com.
> For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
> .
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To post to this group, send email to atxhs-discuss@googlegroups.com.
> To unsubscribe from this group, send email to
> atxhs-discuss+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/atxhs-discuss?hl=en.
> You really need to put together a video showing the scan, the conversion,
> the printing, and the final process. If you want...get with me and we can
> put something together. (I have Sony Vegas HD Suite)
> Jerry
> *Askjerry... everyone else does.*
> Visit me online at http://askjerry.info > *See my projects, video links, tutorials, and blog today.*
> On Mon, Nov 19, 2012 at 11:34 PM, Bill Tyler <B...@tyler-labs.com> wrote:
>> On Nov 15, 2012, at 10:35 AM, Bill Tyler <B...@tyler-labs.com> wrote:
>> Sure thing, I am probably going to set it up in a small office space I
>> have in Round Rock if you're (or anyone else is) interested in checking it
>> out.
>> I have seen or heard reference to the overlap needing to be approx.
>> 30%. But I am experimenting with that still.
>> On Nov 15, 2012, at 9:21 AM, Amishacker <marshallbvaug...@gmail.com>
>> wrote:
>> Interesting. Given the amount of captures they showed in the
>> demonstration it would be possible to get a large array to do that in one
>> capture.
>> I don't see any guideline about how much of a mesh overlap is required to
>> stitch the images though.
>> Any interest in bringing rig 1 to the hackerspace for a photo-op? (once
>> open)
>> On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
>> A note about multiple scanners, they need to be plugged in such that
>> there is only one controller per root usb controller. It will not work
>> with a hub or more than one to a controller. I had to build a new box to
>> get 4 working.
>> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
>> wrote:
>> Wow! This software looks pretty great. I have a few kinects laying around
>> and previously I had some stuff rolled up with some open source tools.
>> Very interested in seeing some video of your setup!
>> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>> I do not yet have any video, but I can make something up.
>> The short of it is that I have the kinects mounted vertically on a
>> studio light pole and placed adjacent to the stage. With one high pointing
>> downward, one at chest level, one at hip level and one around knee level.
>> This does not quite capture the feet so I am still playing with placement
>> and how much overlap is required in order to get the mesh.
>> The software I ended up with is KScan (http://www.kscan3d.com). It's
>> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system
>> I was considering before. KScan is cheap ($300 as opposed to $15k for
>> hardware and software) and runs with multiple scanners.
>> I like KScan over reconstruct me because it has a much nicer interface
>> along with the multi scanner support which reconstruct me does not have.
>> The software was just released in Aug I think so there is still room for
>> improvements.
>> This is my version one setup, I have started looking at
>> Arduino/Raspberry Pi options for collecting scan data to get rid of the
>> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement.
>> I would ultimately like to drive 16 - 20 scanners and create a sort of
>> real-time scanning booth. Then it would be almost as quick to capture a
>> whole body scan as it would be to click the shutter of a regular camera.
>> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
>> Yep. We need to do this. We'll have several 3D printers by the middle
>> of next year.
>> My mini-me will definitely be 28mm
>> Bill, I would love to see your setup. Got any video?
>> Fine detail scanners to compliment a kinect booth:
>> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
>> CAN support that is
>> Sent from my iPhone
>> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
>> Windows can't support up to four however it has to have pretty beefy
>> hardware
>> Sent from my iPhone
>> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
>> Four Kinects! How do you keep the Kinects from interfering with each
>> other? Or do you just get interference and clean it up when you're building
>> the mesh?
>> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>> I have the scanning booth in place. Using 4 kinects and a rotating
>> stage. I can do full body scans in < 30 seconds.
>> Right now the mesh building is manual and taking several hours. But once
>> it is automated this would work.
>> Sent from my iPhone
>> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com>
>> wrote:
>> > We have to do this-- a 3D printer photo booth.
>> > --
>> > You received this message because you are subscribed to the Google
>> Groups "ATXHS Discuss" group.
>> > To post to this group, send email to atxhs-...@googlegroups.com**.
>> > To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> > For more options, visit this group at http://groups.google.com/**group* >> */atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/**group** >> /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/**group** >> /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/**group** >> /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
>> To post to this group, send email to atxhs-discuss@googlegroups.com.
>> To unsubscribe from this group, send email to
>> atxhs-discuss+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/atxhs-discuss?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-discuss@googlegroups.com.
>> To unsubscribe from this group, send email to
>> atxhs-discuss+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/atxhs-discuss?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to
On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
> forgot one
> On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com<javascript:>> > wrote:
> Sure thing, I am probably going to set it up in a small office space I > have in Round Rock if you're (or anyone else is) interested in checking it > out.
> I have seen or heard reference to the overlap needing to be approx. 30%. > But I am experimenting with that still.
> On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com<javascript:>> > wrote:
> Interesting. Given the amount of captures they showed in the demonstration > it would be possible to get a large array to do that in one capture. > I don't see any guideline about how much of a mesh overlap is required to > stitch the images though.
> Any interest in bringing rig 1 to the hackerspace for a photo-op? (once > open)
> On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
> A note about multiple scanners, they need to be plugged in such that there > is only one controller per root usb controller. It will not work with a > hub or more than one to a controller. I had to build a new box to get 4 > working.
> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com> > wrote:
> Wow! This software looks pretty great. I have a few kinects laying around > and previously I had some stuff rolled up with some open source tools.
> Very interested in seeing some video of your setup!
> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
> I do not yet have any video, but I can make something up.
> The short of it is that I have the kinects mounted vertically on a > studio light pole and placed adjacent to the stage. With one high pointing > downward, one at chest level, one at hip level and one around knee level. > This does not quite capture the feet so I am still playing with placement > and how much overlap is required in order to get the mesh.
> The software I ended up with is KScan (http://www.kscan3d.com). It's > made by 3D3 Solutions (http://www.3d3solutions.com) which is the system I > was considering before. KScan is cheap ($300 as opposed to $15k for > hardware and software) and runs with multiple scanners.
> I like KScan over reconstruct me because it has a much nicer interface > along with the multi scanner support which reconstruct me does not have. > The software was just released in Aug I think so there is still room for > improvements.
> This is my version one setup, I have started looking at > Arduino/Raspberry Pi options for collecting scan data to get rid of the > $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. > I would ultimately like to drive 16 - 20 scanners and create a sort of > real-time scanning booth. Then it would be almost as quick to capture a > whole body scan as it would be to click the shutter of a regular camera.
> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
> Yep. We need to do this. We'll have several 3D printers by the middle of > next year. > My mini-me will definitely be 28mm > Bill, I would love to see your setup. Got any video?
> Fine detail scanners to compliment a kinect booth:
> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
> CAN support that is
> Sent from my iPhone
> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
> Windows can't support up to four however it has to have pretty beefy > hardware
> Sent from my iPhone
> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
> Four Kinects! How do you keep the Kinects from interfering with each > other? Or do you just get interference and clean it up when you're building > the mesh?
> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
> I have the scanning booth in place. Using 4 kinects and a rotating stage. > I can do full body scans in < 30 seconds.
> Right now the mesh building is manual and taking several hours. But once > it is automated this would work.
> Sent from my iPhone
> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> > wrote:
> > We have to do this-- a 3D printer photo booth.
> > -- > > You received this message because you are subscribed to the Google > Groups "ATXHS Discuss" group. > > To post to this group, send email to atxhs-...@googlegroups.com**. > > To unsubscribe from this group, send email to atxhs-discus...@** > googlegroups.com. > > For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> > .
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com**. > To unsubscribe from this group, send email to atxhs-discus...@** > googlegroups.com. > For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> > .
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com**. > To unsubscribe from this group, send email to atxhs-discus...@** > googlegroups.com. > For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> > .
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com**. > To unsubscribe from this group, send email to atxhs-discus...@** > googlegroups.com. > For more options, visit this group at http://groups.google.com/** > group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en> > .
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/atxhs-discuss/-/z0LwG5nJqcMJ. > To post to this group, send email to atxhs-...@googlegroups.com. > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com. > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com. > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ. > To post to this group, send email to atxhs-...@googlegroups.com<javascript:> > . > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com <javascript:>. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
> -- > You received this message because you are subscribed to the Google Groups > "ATXHS Discuss" group. > To post to this group, send email to atxhs-...@googlegroups.com<javascript:> > . > To unsubscribe from this group, send email to > atxhs-discus...@googlegroups.com <javascript:>. > For more options, visit this group at > http://groups.google.com/group/atxhs-discuss?hl=en.
Yeah, I was about to say that this is a marketable product. It's a neat
idea, and such a logical extension of the two concepts, it's surprising
people haven't done it before, and that you got it up and running so
quickly. Awesome!
-Sheena
p.s. I'd like one of someone doing aerials. I'm probably not the only one,
but that's a little more complicated!
On Thu, Nov 22, 2012 at 11:53 AM, Mandie Kramer <mandiekra...@gmail.com>wrote:
> Fantastic! Bill, would you be at all interested in participating in the
> Make'n'Bake, offering this service for sale?
> On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
>> forgot one
>> On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>> Sure thing, I am probably going to set it up in a small office space I
>> have in Round Rock if you're (or anyone else is) interested in checking it
>> out.
>> I have seen or heard reference to the overlap needing to be approx.
>> 30%. But I am experimenting with that still.
>> On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com> wrote:
>> Interesting. Given the amount of captures they showed in the
>> demonstration it would be possible to get a large array to do that in one
>> capture.
>> I don't see any guideline about how much of a mesh overlap is required to
>> stitch the images though.
>> Any interest in bringing rig 1 to the hackerspace for a photo-op? (once
>> open)
>> On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
>> A note about multiple scanners, they need to be plugged in such that
>> there is only one controller per root usb controller. It will not work
>> with a hub or more than one to a controller. I had to build a new box to
>> get 4 working.
>> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
>> wrote:
>> Wow! This software looks pretty great. I have a few kinects laying around
>> and previously I had some stuff rolled up with some open source tools.
>> Very interested in seeing some video of your setup!
>> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>> I do not yet have any video, but I can make something up.
>> The short of it is that I have the kinects mounted vertically on a
>> studio light pole and placed adjacent to the stage. With one high pointing
>> downward, one at chest level, one at hip level and one around knee level.
>> This does not quite capture the feet so I am still playing with placement
>> and how much overlap is required in order to get the mesh.
>> The software I ended up with is KScan (http://www.kscan3d.com). It's
>> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system
>> I was considering before. KScan is cheap ($300 as opposed to $15k for
>> hardware and software) and runs with multiple scanners.
>> I like KScan over reconstruct me because it has a much nicer interface
>> along with the multi scanner support which reconstruct me does not have.
>> The software was just released in Aug I think so there is still room for
>> improvements.
>> This is my version one setup, I have started looking at
>> Arduino/Raspberry Pi options for collecting scan data to get rid of the
>> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement.
>> I would ultimately like to drive 16 - 20 scanners and create a sort of
>> real-time scanning booth. Then it would be almost as quick to capture a
>> whole body scan as it would be to click the shutter of a regular camera.
>> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
>> Yep. We need to do this. We'll have several 3D printers by the middle
>> of next year.
>> My mini-me will definitely be 28mm
>> Bill, I would love to see your setup. Got any video?
>> Fine detail scanners to compliment a kinect booth:
>> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
>> CAN support that is
>> Sent from my iPhone
>> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
>> Windows can't support up to four however it has to have pretty beefy
>> hardware
>> Sent from my iPhone
>> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
>> Four Kinects! How do you keep the Kinects from interfering with each
>> other? Or do you just get interference and clean it up when you're building
>> the mesh?
>> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>> I have the scanning booth in place. Using 4 kinects and a rotating
>> stage. I can do full body scans in < 30 seconds.
>> Right now the mesh building is manual and taking several hours. But once
>> it is automated this would work.
>> Sent from my iPhone
>> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com>
>> wrote:
>> > We have to do this-- a 3D printer photo booth.
>> > --
>> > You received this message because you are subscribed to the Google
>> Groups "ATXHS Discuss" group.
>> > To post to this group, send email to atxhs-...@googlegroups.com**.
>> > To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> > For more options, visit this group at http://groups.google.com/**group* >> */atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/**group** >> /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/**group** >> /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/**group** >> /atxhs-discuss?hl=en <http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com.
>> To unsubscribe from this group, send email to
>> atxhs-discus...@googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com.
>> To unsubscribe from this group, send email to
>> atxhs-discus...@googlegroups.**com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
>> You received this message because you are subscribed to the Google Groups
>> "ATXHS Discuss" group.
>> To post to this group, send email to atxhs-...@googlegroups.com**.
>> To unsubscribe from this group, send email to atxhs-discus...@**
>> googlegroups.com.
>> For more options, visit this group at http://groups.google.com/** >> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>> .
>> --
> You received this message because you are subscribed to the Google Groups
> "ATXHS Discuss" group.
> To view this discussion on the web
On Thu, Nov 22, 2012 at 12:15 PM, Sheena Madan <sheenaq...@gmail.com> wrote:
> Yeah, I was about to say that this is a marketable product. It's a neat
> idea, and such a logical extension of the two concepts, it's surprising
> people haven't done it before, and that you got it up and running so
> quickly. Awesome!
> -Sheena
> p.s. I'd like one of someone doing aerials. I'm probably not the only one,
> but that's a little more complicated!
> On Thu, Nov 22, 2012 at 11:53 AM, Mandie Kramer <mandiekra...@gmail.com>wrote:
>> Fantastic! Bill, would you be at all interested in participating in the
>> Make'n'Bake, offering this service for sale?
>> On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
>>> forgot one
>>> On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
>>> Sure thing, I am probably going to set it up in a small office space I
>>> have in Round Rock if you're (or anyone else is) interested in checking it
>>> out.
>>> I have seen or heard reference to the overlap needing to be approx.
>>> 30%. But I am experimenting with that still.
>>> On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com> wrote:
>>> Interesting. Given the amount of captures they showed in the
>>> demonstration it would be possible to get a large array to do that in one
>>> capture.
>>> I don't see any guideline about how much of a mesh overlap is required
>>> to stitch the images though.
>>> Any interest in bringing rig 1 to the hackerspace for a photo-op?
>>> (once open)
>>> On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
>>> A note about multiple scanners, they need to be plugged in such that
>>> there is only one controller per root usb controller. It will not work
>>> with a hub or more than one to a controller. I had to build a new box to
>>> get 4 working.
>>> On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
>>> wrote:
>>> Wow! This software looks pretty great. I have a few kinects laying
>>> around and previously I had some stuff rolled up with some open source
>>> tools.
>>> Very interested in seeing some video of your setup!
>>> On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com>wrote:
>>> I do not yet have any video, but I can make something up.
>>> The short of it is that I have the kinects mounted vertically on a
>>> studio light pole and placed adjacent to the stage. With one high pointing
>>> downward, one at chest level, one at hip level and one around knee level.
>>> This does not quite capture the feet so I am still playing with placement
>>> and how much overlap is required in order to get the mesh.
>>> The software I ended up with is KScan (http://www.kscan3d.com). It's
>>> made by 3D3 Solutions (http://www.3d3solutions.com) which is the system
>>> I was considering before. KScan is cheap ($300 as opposed to $15k for
>>> hardware and software) and runs with multiple scanners.
>>> I like KScan over reconstruct me because it has a much nicer interface
>>> along with the multi scanner support which reconstruct me does not have.
>>> The software was just released in Aug I think so there is still room for
>>> improvements.
>>> This is my version one setup, I have started looking at
>>> Arduino/Raspberry Pi options for collecting scan data to get rid of the
>>> $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement.
>>> I would ultimately like to drive 16 - 20 scanners and create a sort of
>>> real-time scanning booth. Then it would be almost as quick to capture a
>>> whole body scan as it would be to click the shutter of a regular camera.
>>> On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
>>> Yep. We need to do this. We'll have several 3D printers by the middle
>>> of next year.
>>> My mini-me will definitely be 28mm
>>> Bill, I would love to see your setup. Got any video?
>>> Fine detail scanners to compliment a kinect booth:
>>> On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
>>> CAN support that is
>>> Sent from my iPhone
>>> On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
>>> Windows can't support up to four however it has to have pretty beefy
>>> hardware
>>> Sent from my iPhone
>>> On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
>>> Four Kinects! How do you keep the Kinects from interfering with each
>>> other? Or do you just get interference and clean it up when you're building
>>> the mesh?
>>> On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com>wrote:
>>> I have the scanning booth in place. Using 4 kinects and a rotating
>>> stage. I can do full body scans in < 30 seconds.
>>> Right now the mesh building is manual and taking several hours. But once
>>> it is automated this would work.
>>> Sent from my iPhone
>>> On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com>
>>> wrote:
>>> > We have to do this-- a 3D printer photo booth.
>>> > --
>>> > You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> > To post to this group, send email to atxhs-...@googlegroups.com**.
>>> > To unsubscribe from this group, send email to atxhs-discus...@**
>>> googlegroups.**com.
>>> > For more options, visit this group at http://groups.google.com/**group >>> **/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com**.
>>> To unsubscribe from this group, send email to atxhs-discus...@**
>>> googlegroups.**com.
>>> For more options, visit this group at http://groups.google.com/**group** >>> /atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com**.
>>> To unsubscribe from this group, send email to atxhs-discus...@**
>>> googlegroups.**com.
>>> For more options, visit this group at http://groups.google.com/**group** >>> /atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com**.
>>> To unsubscribe from this group, send email to atxhs-discus...@**
>>> googlegroups.**com.
>>> For more options, visit this group at http://groups.google.com/**group** >>> /atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> atxhs-discus...@googlegroups.**com.
>>> For more options, visit this group at http://groups.google.com/** >>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> atxhs-discus...@googlegroups.**com.
>>> For more options, visit this group at http://groups.google.com/** >>> group/atxhs-discuss?hl=en<http://groups.google.com/group/atxhs-discuss?hl=en>
>>> .
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ATXHS Discuss" group.
>>> To post to this group, send email to atxhs-...@googlegroups.com**.
>>> To unsubscribe from
I am interested in the make n bake, I am trying to make a business out of this and would be great to get it out and see how it goes.
Mandy do I talk to you about details of the make n bake? My one limitation is that I have a baby due mid december, although it seems she is intent on coming sooner than later :) So that may affect my ability to make it.
Attached is one of the products I intend to sell. This is a charm for my wife's bracelet that I made of her with our second baby. The bear is for our first, too bad I didn't have this back then. I am also working on sculptures and other stuff.
On Nov 22, 2012, at 11:53 AM, Mandie Kramer <mandiekra...@gmail.com<mailto:mandiekra...@gmail.com>> wrote:
Fantastic! Bill, would you be at all interested in participating in the Make'n'Bake, offering this service for sale?
On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
forgot one
[X]
On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/tm_eJTlSVQEJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
What is the status of the z-printer now that there is a new space?
Any chance there is a possibility of getting a printer that does metal or ceramic? It would be nice to ditch shapeways. Although I would assume something like that would be waaaay expensive.
On Nov 25, 2012, at 10:43 PM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>>
wrote:
I am interested in the make n bake, I am trying to make a business out of this and would be great to get it out and see how it goes.
Mandy do I talk to you about details of the make n bake? My one limitation is that I have a baby due mid december, although it seems she is intent on coming sooner than later :) So that may affect my ability to make it.
Attached is one of the products I intend to sell. This is a charm for my wife's bracelet that I made of her with our second baby. The bear is for our first, too bad I didn't have this back then. I am also working on sculptures and other stuff.
<photo.JPG>
<photo-1.JPG>
On Nov 22, 2012, at 11:53 AM, Mandie Kramer <mandiekra...@gmail.com<mailto:mandiekra...@gmail.com>> wrote:
Fantastic! Bill, would you be at all interested in participating in the Make'n'Bake, offering this service for sale?
On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
forgot one
[X]
On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com<x-msg://186/>> wrote:
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com<x-msg://186/>> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
To post to this group, send email to atxhs-...@googlegroups.com<x-msg://186/>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<x-msg://186/>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<x-msg://186/>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<x-msg://186/>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/tm_eJTlSVQEJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit
...
I have finally worked out most of the kinks with the mini me maker and can post process in ~5 minutes (except final rendering) - down from 2-3 hours.
Since the Make'n Bake fell through, when would be a good time to bring it and show it off and get some feedback? :)
On Nov 22, 2012, at 11:53 AM, Mandie Kramer <mandiekra...@gmail.com<mailto:mandiekra...@gmail.com>> wrote:
Fantastic! Bill, would you be at all interested in participating in the Make'n'Bake, offering this service for sale?
On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
forgot one
[X]
On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com<javascript:>> wrote:
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com<javascript:>> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/MZJbuAOL6qIJ.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com<javascript:>.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com<javascript:>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/tm_eJTlSVQEJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
On Jan 2, 2013, at 10:18 PM, Bill Tyler <B...@tyler-labs.com<mailto:B...@tyler-labs.com>>
wrote:
I have finally worked out most of the kinks with the mini me maker and can post process in ~5 minutes (except final rendering) - down from 2-3 hours.
Since the Make'n Bake fell through, when would be a good time to bring it and show it off and get some feedback? :)
On Nov 22, 2012, at 11:53 AM, Mandie Kramer <mandiekra...@gmail.com<mailto:mandiekra...@gmail.com>> wrote:
Fantastic! Bill, would you be at all interested in participating in the Make'n'Bake, offering this service for sale?
On Monday, November 19, 2012 10:40:23 PM UTC-6, Bill Tyler wrote:
forgot one
[X]
On Nov 15, 2012, at 10:35 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
Sure thing, I am probably going to set it up in a small office space I have in Round Rock if you're (or anyone else is) interested in checking it out.
I have seen or heard reference to the overlap needing to be approx. 30%. But I am experimenting with that still.
On Nov 15, 2012, at 9:21 AM, Amishacker <marshall...@gmail.com> wrote:
Interesting. Given the amount of captures they showed in the demonstration it would be possible to get a large array to do that in one capture.
I don't see any guideline about how much of a mesh overlap is required to stitch the images though.
Any interest in bringing rig 1 to the hackerspace for a photo-op? (once open)
On Thursday, November 15, 2012 1:21:32 AM UTC-6, Bill Tyler wrote:
A note about multiple scanners, they need to be plugged in such that there is only one controller per root usb controller. It will not work with a hub or more than one to a controller. I had to build a new box to get 4 working.
On Nov 15, 2012, at 1:15 AM, Miller Hooks <m...@millerhooks.com>
wrote:
Wow! This software looks pretty great. I have a few kinects laying around and previously I had some stuff rolled up with some open source tools.
Very interested in seeing some video of your setup!
On Thu, Nov 15, 2012 at 1:02 AM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I do not yet have any video, but I can make something up.
The short of it is that I have the kinects mounted vertically on a studio light pole and placed adjacent to the stage. With one high pointing downward, one at chest level, one at hip level and one around knee level. This does not quite capture the feet so I am still playing with placement and how much overlap is required in order to get the mesh.
I like KScan over reconstruct me because it has a much nicer interface along with the multi scanner support which reconstruct me does not have. The software was just released in Aug I think so there is still room for improvements.
This is my version one setup, I have started looking at Arduino/Raspberry Pi options for collecting scan data to get rid of the $1700 rotating stage, and the $1500 computer (per 4 scanners) requirement. I would ultimately like to drive 16 - 20 scanners and create a sort of real-time scanning booth. Then it would be almost as quick to capture a whole body scan as it would be to click the shutter of a regular camera.
On Nov 14, 2012, at 10:16 PM, Amishacker <marshall...@gmail.com> wrote:
Yep. We need to do this. We'll have several 3D printers by the middle of next year.
My mini-me will definitely be 28mm
Bill, I would love to see your setup. Got any video?
Fine detail scanners to compliment a kinect booth:
On Wednesday, November 14, 2012 7:25:40 PM UTC-6, Bill Tyler wrote:
CAN support that is
Sent from my iPhone
On Nov 14, 2012, at 7:23 PM, "Bill Tyler" <Bi...@tyler-labs.com> wrote:
Windows can't support up to four however it has to have pretty beefy hardware
Sent from my iPhone
On Nov 14, 2012, at 7:16 PM, "Brandon Wiley" <bra...@blanu.net> wrote:
Four Kinects! How do you keep the Kinects from interfering with each other? Or do you just get interference and clean it up when you're building the mesh?
On Wed, Nov 14, 2012 at 7:04 PM, Bill Tyler <Bi...@tyler-labs.com> wrote:
I have the scanning booth in place. Using 4 kinects and a rotating stage. I can do full body scans in < 30 seconds.
Right now the mesh building is manual and taking several hours. But once it is automated this would work.
Sent from my iPhone
On Nov 14, 2012, at 6:37 PM, "Martin Bogomolni" <marti...@gmail.com> wrote:
> --
> You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
> To post to this group, send email to atxhs-...@googlegroups.com.
> To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-...@googlegroups.com.
To unsubscribe from this group, send email to atxhs-discus...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To view this discussion on the web visit https://groups.google.com/d/msg/atxhs-discuss/-/tm_eJTlSVQEJ.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
--
You received this message because you are subscribed to the Google Groups "ATXHS Discuss" group.
To post to this group, send email to atxhs-discuss@googlegroups.com<mailto:atxhs-discuss@googlegroups.com>.
To unsubscribe from this group, send email to atxhs-discuss+unsubscribe@googlegroups.com<mailto:atxhs-discuss+unsubscribe @googlegroups.com>.
For more options, visit this group at http://groups.google.com/group/atxhs-discuss?hl=en.
