HUAWEI mit A1
Christoph Pranzl
ich habe folgendes Problem. Ich moechte mein Notebook per UMTS ins Netz.
Mein Notebook ist ein HP Pavillion dv6000, als OS verwende ich ein Ubuntu
8.04, frisch von der CD installiert. Mein Modem ist ein HUAWEI E220 mit
einem Vertrag von A1. Der PIN der SIMKarte ist deaktiviert und im
Chatskript deshalb der PIN Befehl nicht drinnen. Unter Windows geht alles
wunderbar.
Ich bin nach der Anleitung von
http://linux.frankenberger.at/Huawei_E220.html
vorgegangen. Die Peers Datei:
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/ppp0"
debug
/dev/ttyUSB0
115200
defaultroute
noccp
nobsdcomp
user "p...@a1plus.at"
password "ppp"
usepeerdns
connect-delay 10000
persist
habe den User bereits auf p...@aplus.at geaendert, aendert sich nichts.
Mein Chatskript:
ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO
DIAL TONE' ABORT 'NO ANSWER' ABORT DELAYED
# modeminit
'' ATZ
TIMEOUT 5
'' 'AT+cgdcont=1,"IP","A1.net"' OK "ATDT*99#"
# ispconnect
CONNECT \d\c
# prelogin
# ispname
# isppassword
# postlogin
# end of pppconfig stuff
Ein leider typischer Verbindungsaufbau per "pon ppp0" sieht so aus
Jul 20 19:51:09 sportfreund pppd[7877]: pppd 2.4.4 started by root, uid 0
Jul 20 19:51:10 sportfreund chat[7906]: abort on (BUSY)
Jul 20 19:51:10 sportfreund chat[7906]: abort on (NO CARRIER)
Jul 20 19:51:10 sportfreund chat[7906]: abort on (VOICE)
Jul 20 19:51:10 sportfreund chat[7906]: abort on (NO DIALTONE)
Jul 20 19:51:10 sportfreund chat[7906]: abort on (NO DIAL TONE)
Jul 20 19:51:10 sportfreund chat[7906]: abort on (NO ANSWER)
Jul 20 19:51:10 sportfreund chat[7906]: abort on (DELAYED)
Jul 20 19:51:10 sportfreund chat[7906]: send (ATZ^M)
Jul 20 19:51:10 sportfreund chat[7906]: timeout set to 5 seconds
Jul 20 19:51:10 sportfreund chat[7906]: send (AT
+cgdcont=1,"IP","A1.net"^M)
Jul 20 19:51:11 sportfreund chat[7906]: expect (OK)
Jul 20 19:51:16 sportfreund chat[7906]: alarm
Jul 20 19:51:16 sportfreund chat[7906]: Failed
Jul 20 19:51:17 sportfreund pppd[7877]: Exit.
Kann mir da vielleicht jemand helfen. Beim Suchen im Netz komme ich ueber
verscheidenste Links immer wieder auf die Seite von Frankenberger.
Im Anschluss noch ein paar Logs die eventuell helfen koennten.
mfg
Christoph
Boot:
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC
2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f82e0
[ 0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523984
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523984
[ 0.000000] On node 0 totalpages: 523984
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 292307 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8240 checksum 0
[ 0.000000] ACPI: RSDP 000F8240, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7FED22DC, 0084 (r1 HPQOEM SLIC-MPC 6040000
LTP 0)
[ 0.000000] ACPI: FACP 7FEDBC04, 00F4 (r3 HP 30CC 6040000
ALAN 1)
[ 0.000000] ACPI: DSDT 7FED3638, 8558 (r1 HP 30D2 6040000
INTL 20060707)
[ 0.000000] ACPI: FACS 7FEDEFC0, 0040
[ 0.000000] ACPI: APIC 7FEDBCF8, 0068 (r1 HP 30D2 6040000
LOHR 5A)
[ 0.000000] ACPI: HPET 7FEDBD60, 0038 (r1 HP 30D2 6040000
LOHR 5A)
[ 0.000000] ACPI: MCFG 7FEDBD98, 003C (r1 HP 30D2 6040000
LOHR 5A)
[ 0.000000] ACPI: TMOR 7FEDBDD4, 0026 (r1 HP 30CC 6040000
PTL 3)
[ 0.000000] ACPI: APIC 7FEDBDFA, 0068 (r1 HP 30D2 6040000
LTP 0)
[ 0.000000] ACPI: BOOT 7FEDBE62, 0028 (r1 HP 30D2 6040000
LTP 1)
[ 0.000000] ACPI: SLIC 7FEDBE8A, 0176 (r1 HPQOEM SLIC-MPC 6040000
LTP 1)
[ 0.000000] ACPI: SSDT 7FED335B, 02DD (r1 HP 30D2 1000
INTL 20060707)
[ 0.000000] ACPI: SSDT 7FED28EC, 025F (r1 HP 30D2 3000
INTL 20060707)
[ 0.000000] ACPI: SSDT 7FED2846, 00A6 (r1 HP 30D2 3000
INTL 20060707)
[ 0.000000] ACPI: SSDT 7FED2360, 04E6 (r1 HP 30D2 3000
INTL 20060707)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-
ac...@vger.kernel.org
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000ce000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000
- 00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000
- 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 519891
[ 0.000000] Kernel command line: root=UUID=b4a729fb-0f72-4f92-
b470-3e832df83eae ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1795.789 MHz processor.
[ 646.359454] Console: colour VGA+ 80x25
[ 646.359457] console [tty0] enabled
[ 646.359725] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 646.359993] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 646.440220] Memory: 2065596k/2095936k available (2157k kernel code,
29052k reserved, 998k data, 364k init, 1178432k highmem)
[ 646.440226] virtual kernel memory layout:
[ 646.440227] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 646.440228] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 646.440229] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 646.440230] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 646.440231] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 646.440232] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 646.440232] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 646.440235] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 646.440273] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 646.440411] hpet clockevent registered
[ 646.520381] Calibrating delay using timer specific routine.. 3595.08
BogoMIPS (lpj=7190179)
[ 646.520402] Security Framework initialized
[ 646.520408] SELinux: Disabled at boot.
[ 646.520420] AppArmor: AppArmor initialized
[ 646.520424] Failure registering capabilities with primary security
module.
[ 646.520431] Mount-cache hash table entries: 512
[ 646.520544] CPU: After generic identify, caps: bfebfbff 20100000
00000000 00000000 0000e3bd 00000000 00000001 00000001
[ 646.520552] monitor/mwait feature present.
[ 646.520553] using mwait in idle threads.
[ 646.520557] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 646.520558] CPU: L2 cache: 2048K
[ 646.520561] CPU: Physical Processor ID: 0
[ 646.520562] CPU: Processor Core ID: 0
[ 646.520564] CPU: After all inits, caps: bfebfbff 20100000 00000000
00003940 0000e3bd 00000000 00000001 00000001
[ 646.520572] Compat vDSO mapped to ffffe000.
[ 646.520583] Checking 'hlt' instruction... OK.
[ 646.536709] SMP alternatives: switching to UP code
[ 646.538111] Early unpacking initramfs... done
[ 646.838430] ACPI: Core revision 20070126
[ 646.838476] ACPI: Looking for DSDT in initramfs... error, file /
DSDT.aml not found.
[ 646.843401] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz
stepping 0d
[ 646.843415] SMP alternatives: switching to SMP code
[ 646.844026] Booting processor 1/1 eip 3000
[ 646.854243] Initializing CPU#1
[ 646.932194] Calibrating delay using timer specific routine.. 3591.43
BogoMIPS (lpj=7182861)
[ 646.932201] CPU: After generic identify, caps: bfebfbff 20100000
00000000 00000000 0000e3bd 00000000 00000001 00000001
[ 646.932206] monitor/mwait feature present.
[ 646.932208] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 646.932210] CPU: L2 cache: 2048K
[ 646.932212] CPU: Physical Processor ID: 0
[ 646.932213] CPU: Processor Core ID: 1
[ 646.932214] CPU: After all inits, caps: bfebfbff 20100000 00000000
00003940 0000e3bd 00000000 00000001 00000001
[ 646.932760] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz
stepping 0d
[ 646.932780] Total of 2 processors activated (7186.52 BogoMIPS).
[ 646.932947] ENABLING IO-APIC IRQs
[ 646.933129] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 647.080227] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 647.100234] Brought up 2 CPUs
[ 647.100256] CPU0 attaching sched-domain:
[ 647.100259] domain 0: span 03
[ 647.100260] groups: 01 02
[ 647.100263] CPU1 attaching sched-domain:
[ 647.100265] domain 0: span 03
[ 647.100266] groups: 02 01
[ 647.100462] net_namespace: 64 bytes
[ 647.100472] Booting paravirtualized kernel on bare hardware
[ 647.100918] Time: 19:09:09 Date: 07/20/08
[ 647.100943] NET: Registered protocol family 16
[ 647.101111] EISA bus registered
[ 647.101115] ACPI: bus type pci registered
[ 647.101486] PCI: PCI BIOS revision 3.00 entry at 0xfde31, last bus=7
[ 647.101488] PCI: Using configuration type 1
[ 647.101489] Setting up standard PCI resources
[ 647.103514] ACPI: EC: Look up EC in DSDT
[ 647.105717] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 647.106701] ACPI: Interpreter enabled
[ 647.106704] ACPI: (supports S0 S3 S4 S5)
[ 647.106718] ACPI: Using IOAPIC for interrupt routing
[ 647.108104] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 647.112713] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data =
0x62
[ 647.112715] ACPI: EC: driver started in interrupt mode
[ 647.112756] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 647.113688] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 647.113692] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 647.115247] PCI: Transparent bridge - 0000:00:1e.0
[ 647.115294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 647.115582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 647.115713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 647.115838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 647.115961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 647.116098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 647.125652] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12
14 15)
[ 647.125754] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14
15) *10
[ 647.125854] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12
14 15)
[ 647.125953] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14
15) *10
[ 647.126052] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14
15) *11
[ 647.126150] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 647.126248] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14
15) *11
[ 647.126347] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14
15) *10
[ 647.126488] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 647.126514] pnp: PnP ACPI init
[ 647.126521] ACPI: bus type pnp registered
[ 647.128824] pnp: PnP ACPI: found 11 devices
[ 647.128826] ACPI: ACPI bus type pnp unregistered
[ 647.128829] PnPBIOS: Disabled by ACPI PNP
[ 647.129023] PCI: Using ACPI for IRQ routing
[ 647.129025] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 647.232085] NET: Registered protocol family 8
[ 647.232087] NET: Registered protocol family 20
[ 647.232117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 647.232121] hpet0: 3 64-bit timers, 14318180 Hz
[ 647.233152] AppArmor: AppArmor Filesystem Enabled
[ 647.236064] Time: tsc clocksource has been installed.
[ 647.236071] Switched to high resolution mode on CPU 0
[ 647.236169] Switched to high resolution mode on CPU 1
[ 647.248051] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not
be reserved
[ 647.248054] system 00:01: iomem range 0xfed14000-0xfed17fff could not
be reserved
[ 647.248057] system 00:01: iomem range 0xfed18000-0xfed18fff could not
be reserved
[ 647.248060] system 00:01: iomem range 0xfed19000-0xfed19fff could not
be reserved
[ 647.248062] system 00:01: iomem range 0xe0000000-0xefffffff could not
be reserved
[ 647.248065] system 00:01: iomem range 0xfed20000-0xfed3ffff could not
be reserved
[ 647.248068] system 00:01: iomem range 0xfed40000-0xfed44fff could not
be reserved
[ 647.248070] system 00:01: iomem range 0xfed45000-0xfed8ffff could not
be reserved
[ 647.248078] system 00:04: iomem range 0xfed00000-0xfed003ff could not
be reserved
[ 647.248084] system 00:06: ioport range 0x680-0x69f has been reserved
[ 647.248086] system 00:06: ioport range 0x800-0x80f has been reserved
[ 647.248089] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 647.248091] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 647.248094] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 647.248096] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 647.248102] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 647.248104] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 647.278473] PCI: Failed to allocate mem resource #6:20000@e0000000 for
0000:01:00.0
[ 647.278476] PCI: Bridge: 0000:00:01.0
[ 647.278478] IO window: 2000-2fff
[ 647.278481] MEM window: c4000000-c6ffffff
[ 647.278484] PREFETCH window: d0000000-dfffffff
[ 647.278488] PCI: Bridge: 0000:00:1c.0
[ 647.278490] IO window: 4000-7fff
[ 647.278496] MEM window: f4000000-f7ffffff
[ 647.278500] PREFETCH window: f0000000-f3ffffff
[ 647.278506] PCI: Bridge: 0000:00:1c.1
[ 647.278509] IO window: 8000-bfff
[ 647.278514] MEM window: bc000000-bfffffff
[ 647.278518] PREFETCH window: c8000000-cbffffff
[ 647.278524] PCI: Bridge: 0000:00:1c.5
[ 647.278527] IO window: c000-cfff
[ 647.278533] MEM window: f8000000-f80fffff
[ 647.278537] PREFETCH window: 88000000-880fffff
[ 647.278543] PCI: Bridge: 0000:00:1e.0
[ 647.278544] IO window: disabled.
[ 647.278550] MEM window: f8100000-f81fffff
[ 647.278554] PREFETCH window: disabled.
[ 647.278571] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 647.278576] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 647.278601] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low)
-> IRQ 17
[ 647.278606] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 647.278629] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low)
-> IRQ 16
[ 647.278634] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 647.278657] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low)
-> IRQ 16
[ 647.278663] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 647.278677] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 647.278688] NET: Registered protocol family 2
[ 647.316043] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 647.316247] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 647.316642] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 647.316836] TCP: Hash tables configured (established 131072 bind 65536)
[ 647.316839] TCP reno registered
[ 647.328102] checking if image is initramfs... it is
[ 647.983346] Freeing initrd memory: 7702k freed
[ 647.983485] Simple Boot Flag at 0x35 set to 0x1
[ 647.984049] audit: initializing netlink socket (disabled)
[ 647.984063] audit(1216580950.420:1): initialized
[ 647.984257] highmem bounce pool size: 64 pages
[ 647.986023] VFS: Disk quotas dquot_6.5.1
[ 647.986091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 647.986205] io scheduler noop registered
[ 647.986207] io scheduler anticipatory registered
[ 647.986209] io scheduler deadline registered
[ 647.986219] io scheduler cfq registered (default)
[ 647.986349] Boot video device is 0000:01:00.0
[ 647.986449] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 647.986486] assign_interrupt_mode Found MSI capability
[ 647.986517] Allocate Port Service[0000:00:01.0:pcie00]
[ 647.986547] Allocate Port Service[0000:00:01.0:pcie02]
[ 647.986623] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 647.986684] assign_interrupt_mode Found MSI capability
[ 647.986732] Allocate Port Service[0000:00:1c.0:pcie00]
[ 647.986762] Allocate Port Service[0000:00:1c.0:pcie02]
[ 647.986861] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 647.986922] assign_interrupt_mode Found MSI capability
[ 647.986971] Allocate Port Service[0000:00:1c.1:pcie00]
[ 647.987002] Allocate Port Service[0000:00:1c.1:pcie02]
[ 647.987106] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 647.987167] assign_interrupt_mode Found MSI capability
[ 647.987215] Allocate Port Service[0000:00:1c.5:pcie00]
[ 647.987245] Allocate Port Service[0000:00:1c.5:pcie02]
[ 647.987485] isapnp: Scanning for PnP cards...
[ 648.341902] isapnp: No Plug & Play device found
[ 648.364399] Real Time Clock Driver v1.12ac
[ 648.364612] hpet_resources: 0xfed00000 is busy
[ 648.364638] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 648.365708] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 648.365767] input: Macintosh mouse button emulation as /devices/
virtual/input/input0
[ 648.365856] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 648.407374] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 648.407379] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 648.415582] mice: PS/2 mouse device common for all mice
[ 648.415678] EISA: Probing bus 0 at eisa.0
[ 648.415685] Cannot allocate resource for EISA slot 1
[ 648.415687] Cannot allocate resource for EISA slot 2
[ 648.415694] Cannot allocate resource for EISA slot 4
[ 648.415695] Cannot allocate resource for EISA slot 5
[ 648.415697] Cannot allocate resource for EISA slot 6
[ 648.415699] Cannot allocate resource for EISA slot 7
[ 648.415701] Cannot allocate resource for EISA slot 8
[ 648.415702] EISA: Detected 0 cards.
[ 648.415705] cpuidle: using governor ladder
[ 648.415707] cpuidle: using governor menu
[ 648.415781] NET: Registered protocol family 1
[ 648.415806] Using IPI No-Shortcut mode
[ 648.415832] registered taskstats version 1
[ 648.415949] Magic number: 0:142:193
[ 648.415968] hash matches device ttys5
[ 648.416012] hash matches device device:1f
[ 648.416018] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 648.416020] EDD information not available.
[ 648.416198] Freeing unused kernel memory: 364k freed
[ 648.443802] input: AT Translated Set 2 keyboard as /devices/platform/
i8042/serio0/input/input1
[ 649.621054] fuse init (API version 7.9)
[ 649.639926] ACPI: SSDT 7FED305B, 0238 (r1 HP 30D2 3000
INTL 20060707)
[ 649.640143] ACPI: SSDT 7FED2B4B, 048B (r1 HP 30D2 3001
INTL 20060707)
[ 649.641928] Monitor-Mwait will be used to enter C-1 state
[ 649.641931] Monitor-Mwait will be used to enter C-2 state
[ 649.642014] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 649.642018] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 649.642235] ACPI: SSDT 7FED3293, 00C8 (r1 HP 30D2 3000
INTL 20060707)
[ 649.642436] ACPI: SSDT 7FED2FD6, 0085 (r1 HP 30D2 3000
INTL 20060707)
[ 649.643361] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 649.643365] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 649.644792] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical
threshold [20070126]
[ 649.999178] usbcore: registered new interface driver usbfs
[ 649.999199] usbcore: registered new interface driver hub
[ 649.999223] usbcore: registered new device driver usb
[ 650.000275] USB Universal Host Controller Interface driver v3.0
[ 650.000317] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 650.000327] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 650.000331] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 650.000537] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 650.000571] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 650.000690] usb usb1: configuration #1 chosen from 1 choice
[ 650.000711] hub 1-0:1.0: USB hub found
[ 650.000716] hub 1-0:1.0: 2 ports detected
[ 650.100516] SCSI subsystem initialized
[ 650.107556] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low)
-> IRQ 18
[ 650.107568] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 650.107572] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 650.107593] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 2
[ 650.107625] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001820
[ 650.107731] usb usb2: configuration #1 chosen from 1 choice
[ 650.107753] hub 2-0:1.0: USB hub found
[ 650.107757] hub 2-0:1.0: 2 ports detected
[ 650.127035] libata version 3.00 loaded.
[ 650.210870] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low)
-> IRQ 19
[ 650.210882] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 650.210886] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 650.210907] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 3
[ 650.210940] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001840
[ 650.211051] usb usb3: configuration #1 chosen from 1 choice
[ 650.211073] hub 3-0:1.0: USB hub found
[ 650.211078] hub 3-0:1.0: 2 ports detected
[ 650.314805] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low)
-> IRQ 20
[ 650.314816] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 650.314820] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 650.314840] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 4
[ 650.314871] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001860
[ 650.314972] usb usb4: configuration #1 chosen from 1 choice
[ 650.314992] hub 4-0:1.0: USB hub found
[ 650.314997] hub 4-0:1.0: 2 ports detected
[ 650.418748] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
-> IRQ 21
[ 650.418760] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 650.418764] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 650.418786] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 5
[ 650.418818] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001880
[ 650.418928] usb usb5: configuration #1 chosen from 1 choice
[ 650.418950] hub 5-0:1.0: USB hub found
[ 650.418955] hub 5-0:1.0: 2 ports detected
[ 650.522768] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low)
-> IRQ 21
[ 650.522783] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 650.522787] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 650.522824] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 6
[ 650.526748] ehci_hcd 0000:00:1a.7: debug port 1
[ 650.526755] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 650.526761] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf8404800
[ 650.543611] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 650.543717] usb usb6: configuration #1 chosen from 1 choice
[ 650.543741] hub 6-0:1.0: USB hub found
[ 650.543746] hub 6-0:1.0: 4 ports detected
[ 650.646664] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low)
-> IRQ 19
[ 650.646680] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 650.646684] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 650.646707] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 7
[ 650.650629] ehci_hcd 0000:00:1d.7: debug port 1
[ 650.650635] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 650.650641] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8404c00
[ 650.663534] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 650.663633] usb usb7: configuration #1 chosen from 1 choice
[ 650.663654] hub 7-0:1.0: USB hub found
[ 650.663659] hub 7-0:1.0: 6 ports detected
[ 650.766594] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 650.766623] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low)
-> IRQ 17
[ 650.766642] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 650.766963] eth0: RTL8101e at 0xf883c000, 00:1b:24:95:cf:23, XID
34000000 IRQ 219
[ 650.768086] ahci 0000:00:1f.2: version 3.0
[ 650.768107] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low)
-> IRQ 20
[ 651.770074] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x7 impl SATA mode
[ 651.770078] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio
slum part
[ 651.770084] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 651.770306] scsi0 : ahci
[ 651.770505] scsi1 : ahci
[ 651.770642] scsi2 : ahci
[ 651.770735] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port
0xf8404100 irq 218
[ 651.770739] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port
0xf8404180 irq 218
[ 651.770742] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port
0xf8404200 irq 218
[ 651.842014] usb 7-4: new high speed USB device using ehci_hcd and
address 4
[ 651.982948] usb 7-4: configuration #1 chosen from 1 choice
[ 652.246847] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 652.247263] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max
UDMA/100
[ 652.247266] ata1.00: 312581808 sectors, multi 16: LBA48
[ 652.247732] ata1.00: configured for UDMA/100
[ 652.461736] usb 4-1: new full speed USB device using uhci_hcd and
address 2
[ 652.558701] ata2: SATA link down (SStatus 0 SControl 300)
[ 652.624982] usb 4-1: configuration #1 chosen from 1 choice
[ 652.865550] usb 3-2: new low speed USB device using uhci_hcd and
address 2
[ 652.869580] ata3: SATA link down (SStatus 0 SControl 300)
[ 652.869732] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6
04.0 PQ: 0 ANSI: 5
[ 652.870040] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low)
-> IRQ 20
[ 652.870073] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 652.870086] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 652.870685] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low)
-> IRQ 22
[ 652.923418] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=
[f8100000-f81007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 652.927630] ata_piix 0000:00:1f.1: version 2.12
[ 652.927644] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low)
-> IRQ 20
[ 652.927671] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 652.927944] scsi3 : ata_piix
[ 652.927982] scsi4 : ata_piix
[ 652.928513] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0
irq 14
[ 652.928516] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8
irq 15
[ 652.934914] Driver 'sd' needs updating - please use bus_type methods
[ 652.934982] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
(160042 MB)
[ 652.934993] sd 0:0:0:0: [sda] Write Protect is off
[ 652.934995] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 652.935010] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 652.935051] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
(160042 MB)
[ 652.935060] sd 0:0:0:0: [sda] Write Protect is off
[ 652.935062] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 652.935077] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 652.935080] sda: sda1 sda2 sda3
[ 653.012561] sd 0:0:0:0: [sda] Attached SCSI disk
[ 653.017112] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 653.097820] usb 3-2: configuration #1 chosen from 1 choice
[ 653.245836] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
[ 653.337329] usb 5-2: new full speed USB device using uhci_hcd and
address 2
[ 653.362111] Attempting manual resume
[ 653.362113] swsusp: Resume From Partition 8:2
[ 653.362114] PM: Checking swsusp image.
[ 653.362297] PM: Resume from disk failed.
[ 653.401232] kjournald starting. Commit interval 5 seconds
[ 653.401243] EXT3-fs: mounted filesystem with ordered data mode.
[ 653.417683] ata4.00: configured for MWDMA2
[ 653.515692] usb 5-2: configuration #1 chosen from 1 choice
[ 653.518878] usbcore: registered new interface driver hiddev
[ 653.532728] input: Logitech USB-PS/2 Optical Mouse as /devices/
pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input2
[ 653.541293] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2
Optical Mouse] on usb-0000:00:1d.0-2
[ 653.541306] usbcore: registered new interface driver usbhid
[ 653.541314] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 653.587943] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L
NC08 PQ: 0 ANSI: 5
[ 653.588004] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 654.197238] ieee1394: Host added: ID:BUS[0-00:1023] GUID
[00241b0032565400]
[ 659.978077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 660.099388] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 660.150308] Linux agpgart interface v0.102
[ 660.227583] input: Power Button (FF) as /devices/virtual/input/input3
[ 660.250240] ACPI: Power Button (FF) [PWRF]
[ 660.250336] input: Power Button (CM) as /devices/virtual/input/input4
[ 660.282229] ACPI: Power Button (CM) [PWRB]
[ 660.282320] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 660.323220] ACPI: Sleep Button (CM) [SLPB]
[ 660.323321] input: Lid Switch as /devices/virtual/input/input6
[ 660.323661] ACPI: Lid Switch [LID]
[ 660.387115] ACPI: Battery Slot [BAT0] (battery present)
[ 660.387758] ACPI: AC Adapter [ACAD] (on-line)
[ 660.466294] ACPI: WMI-Acer: Mapper loaded
[ 660.676230] input: Video Bus as /devices/LNXSYSTM:00/device:00/
PNP0A08:00/device:02/LNXVIDEO:00/input/input7
[ 660.702045] ACPI: Video Device [VGA] (multi-head: yes rom: no post:
no)
[ 660.702680] input: Video Bus as /devices/LNXSYSTM:00/device:00/
PNP0A08:00/LNXVIDEO:01/input/input8
[ 660.723029] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
no)
[ 661.465752] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network
Connection driver for Linux, 1.2.0
[ 661.465756] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 661.465899] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 661.465914] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 661.465936] iwl3945: Detected Intel PRO/Wireless 3945ABG Network
Connection
[ 661.553773] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
-> IRQ 23
[ 661.553799] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 661.637651] Bluetooth: Core ver 2.11
[ 661.641694] NET: Registered protocol family 31
[ 661.641696] Bluetooth: HCI device and connection manager initialized
[ 661.641700] Bluetooth: HCI socket layer initialized
[ 661.681618] Bluetooth: HCI USB driver ver 2.9
[ 661.683226] usbcore: registered new interface driver hci_usb
[ 661.699668] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 661.699671] ricoh-mmc: Copyright(c) Philip Langdale
[ 661.722458] sdhci: Secure Digital Host Controller Interface driver
[ 661.722461] sdhci: Copyright(c) Pierre Ossman
[ 661.870873] Linux video capture interface: v2.00
[ 661.966178] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101)
[ 661.967768] usbcore: registered new interface driver uvcvideo
[ 661.967773] USB Video Class driver (v0.1.0)
[ 662.010505] iTCO_vendor_support: vendor-support=0
[ 662.033154] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-
Jul-2007)
[ 662.033253] iTCO_wdt: Found a ICH8M TCO device (Version=2,
TCOBASE=0x1060)
[ 662.033305] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 662.053187] Driver 'sr' needs updating - please use bus_type methods
[ 662.072427] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 662.074013] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/
form2 cdda tray
[ 662.074016] Uniform CD-ROM driver Revision: 3.20
[ 662.074061] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 663.088244] sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822]
(rev 22)
[ 663.088267] ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low)
-> IRQ 18
[ 663.088281] sdhci:slot0: Will use DMA mode even though HW doesn't
fully claim to support it.
[ 663.088327] mmc0: SDHCI at 0xf8100800 irq 18 DMA
[ 663.149831] ricoh-mmc: Ricoh MMC controller found at 0000:07:09.2
[1180:0843] (rev 12)
[ 663.149845] ricoh-mmc: Controller is now disabled.
[ 663.193777] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 663.194163] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 663.304306] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 663.410997] input: SynPS/2 Synaptics TouchPad as /devices/platform/
i8042/serio1/input/input10
[ 663.636341] lp: driver loaded but no devices found
[ 663.735110] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1
across:2000084k
[ 664.264974] EXT3 FS on sda3, internal journal
[ 665.464280] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 665.990917] No dock devices found.
[ 666.794099] apm: BIOS not found.
[ 666.913580] ppdev: user-space parallel port driver
[ 666.996797] audit(1216573769.436:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=5275 profile="/usr/sbin/cupsd" namespace="default"
[ 668.463966] r8169: eth0: link down
[ 668.607836] Bluetooth: L2CAP ver 2.9
[ 668.607844] Bluetooth: L2CAP socket layer initialized
[ 668.762938] Bluetooth: RFCOMM socket layer initialized
[ 668.762962] Bluetooth: RFCOMM TTY layer initialized
[ 668.762966] Bluetooth: RFCOMM ver 1.8
[ 2833.870758] NET: Registered protocol family 10
[ 2833.871264] lo: Disabled Privacy Extensions
[ 2833.872157] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2833.873127] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2841.114629] CPU0 attaching NULL sched-domain.
[ 2841.114640] CPU1 attaching NULL sched-domain.
[ 2841.133089] CPU0 attaching sched-domain:
[ 2841.133097] domain 0: span 03
[ 2841.133101] groups: 01 02
[ 2841.133108] CPU1 attaching sched-domain:
[ 2841.133112] domain 0: span 03
[ 2841.133115] groups: 02 01
[ 2855.266049] mmc0: new SD card at address b368
[ 2855.652113] mmcblk0: mmc0:b368 SD 491008KiB
[ 2855.652172] mmcblk0: p1
Einstecken des Modems in einen USB Port:
[ 3002.660709] usb 3-1: new full speed USB device using uhci_hcd and
address 3
[ 3002.817927] usb 3-1: configuration #1 chosen from 1 choice
[ 3002.895090] usbcore: registered new interface driver usbserial
[ 3002.895966] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-
serial.c: USB Serial support registered for generic
[ 3002.897543] usbserial_generic 3-1:1.0: generic converter detected
[ 3002.898678] usb 3-1: generic converter now attached to ttyUSB0
[ 3002.899573] usbcore: registered new interface driver usbserial_generic
[ 3002.899581] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-
serial.c: USB Serial Driver core
[ 3002.990114] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-
serial.c: USB Serial support registered for airprime
[ 3002.990146] usbcore: registered new interface driver airprime
[ 3002.994845] usbcore: registered new interface driver libusual
Flo
> wunderbar.
>
Gleich eine Frage vorweg: Was chatted Windows? Hast du im Logfile schon
nachgeschaut?
> connect "/usr/sbin/chat -v -f /etc/chatscripts/ppp0"
> debug
> /dev/ttyUSB0
Laeuft das Modem auch richtig? Ich habe die Anleitung ueberflogen, da
steht USB0-2, das habe ich in deinem Logfile nicht gesehen.
Da meldet sich das Modem nicht. Das muesste mit OK kommen. Irgendwie
verstehen sich Rechner und Modem nicht.
Was du da als User oder Passwort eingetragen hast ist egal, soweit
kommst du gar nicht.
MfG
Florian.
Mario Grünwald
Unter Debian hatte ich mal das Problem, daß ein Kartenleser erst
funktioniert hat, als ich das zweite Mal lsusb eingegeben habe (als
root).
Ansonsten: Ich verwende das gleiche Modem mit yess und PIN. Manchmal muß
ich es öfters versuchen (bis zu 3 Mal). Aber ich vermute, daß das
sowieso tust.
lg
Mario
Christoph Pranzl
habe nach weiterem suchen im Forum der Ubuntu-Austria-Group erfahren das
eventuell das Modul airprime zu deaktiviert werden soll. Werde das heute
Abend mal versuchen.
mfg
Christoph
Clemens Schueller
* Am 23.07.2008 13:40 klopfte Christoph Pranzl folgendes in die Tasten:
> Hallo,
>
> ich habe folgendes Problem. Ich moechte mein Notebook per UMTS ins Netz.
> Mein Notebook ist ein HP Pavillion dv6000, als OS verwende ich ein Ubuntu
> 8.04, frisch von der CD installiert. Mein Modem ist ein HUAWEI E220 mit
> einem Vertrag von A1. Der PIN der SIMKarte ist deaktiviert und im
> Chatskript deshalb der PIN Befehl nicht drinnen. Unter Windows geht alles
> wunderbar.
Ich hab mal auf einer gentoo Kiste das Problem gehabt, dass beim
Anstecken des Modems die Devices ttyUSB0 und ttyUSB1 zuerst und dann
sofort wieder weg waren.
Nach genauerer Analyse bin ich drauf gekommen, dass mir der HAL in die
Quere gekommen ist. Nach einer Suche mit Google hab ich den Tip
gefunden, eine Rule für den HAL anzulegen.
Leider finde ich die Seite mit der Rule nicht mehr - sorry.
GreetinX, Clemens Schueller