Cabezazos contra la pared

110 views
Skip to first unread message

Carlos

unread,
Nov 18, 2009, 6:42:16 PM11/18/09
to asterisk-es
Soy instalador de redes al que un cliente que no le pagaba le dio a
modo de trueque una tarjeta digium con 1 modulo FXO y un telefono
LINKSYS SPA491. Me convencio diciendome que podia montar una
centralita facilmente con una linea analogica. Mis unicos
conocimientos sobre asterisk vienen de leer el Elastix without tears y
comunicaciones unificadas con elaxtix. Unicamente quiero realizar
llamadas y recibirlas. Os copio mi system.conf y mi chan_dahdi.conf
ademas de lo que el cli me dice cuando intento llamar. Mi version de
Elastix es la 1.6-12. Estoy dispuesto ha hacer lo que sea incluso
cambiar de distribucion ya que escogi la elastix porque al parecer era
la mas sencilla de utilizar. Mi agradecimiento por adelantado.

systen.conf

# Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
fxsks=1
echocanceller=oslec,1
# channel 2, WCTDM/0/1, no module.
# channel 3, WCTDM/0/2, no module.
# channel 4, WCTDM/0/3, no module.

# Global data

loadzone = es
defaultzone = es

chan_dahdi.conf

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
;Uncomment these lines if you have problems with the disconection of
your analog lines
busydetect=yes
busycount=3
channel => 1

immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf

elastix*cli

-- Executing [0954215012@from-internal:1] Macro("SIP/2311-0934b580",
"user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/2311-0934b580",
"AMPUSER=2311") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/2311-0934b580",
"0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/2311-0934b580",
"1|Set|REALCALLERIDNUM=2311") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/2311-0934b580",
"AMPUSER=2311") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/2311-0934b580",
"AMPUSERCIDNAME=2311") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/2311-0934b580",
"0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/2311-0934b580",
"AMPUSERCID=2311") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/2311-0934b580",
"CALLERID(all)="2311" <2311>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/2311-0934b580",
"0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/
2311-0934b580", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("SIP/2311-0934b580",
"Using CallerID "2311" <2311>") in new stack
-- Executing [0954215012@from-internal:2] Set("SIP/2311-0934b580",
"_NODEST=") in new stack
-- Executing [0954215012@from-internal:3] Macro("SIP/
2311-0934b580", "record-enable|2311|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/2311-0934b580",
"1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/2311-0934b580",
"recordingcheck|20091119-004036|1258587636.7") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20091119-004036|1258587636.7: Outbound recording not
enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] MacroExit("SIP/
2311-0934b580", "") in new stack
-- Executing [0954215012@from-internal:4] Macro("SIP/
2311-0934b580", "dialout-trunk|2|954215012||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/2311-0934b580",
"DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/
2311-0934b580", "0?sub-pincheck|s|1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/2311-0934b580",
"0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/2311-0934b580",
"DIAL_NUMBER=954215012") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/2311-0934b580",
"DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/2311-0934b580",
"OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/2311-0934b580",
"0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/2311-0934b580",
"0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/2311-0934b580",
"0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/2311-0934b580",
"DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/2311-0934b580",
"outbound-callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/
2311-0934b580", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/
2311-0934b580", "0|Set|REALCALLERIDNUM=2311") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/
2311-0934b580", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/
2311-0934b580", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/
2311-0934b580", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/
2311-0934b580", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/
2311-0934b580", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/
2311-0934b580", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/
2311-0934b580", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/
2311-0934b580", "0|SetCallerPres|prohib_passed_screen") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/
2311-0934b580", "1|AGI|fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
> fixlocalprefix: Using pattern XX.
== fixlocalprefix: Dialpattern XX. matched. 954215012 -> 954215012
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:13] Set("SIP/2311-0934b580",
"OUTNUM=954215012") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/2311-0934b580",
"custom=DAHDI/1") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/
2311-0934b580", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/2311-0934b580",
"dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/
2311-0934b580", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/
2311-0934b580", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/
2311-0934b580", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/2311-0934b580",
"DAHDI/1/954215012|300|") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:20] Goto("SIP/2311-0934b580",
"s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/
2311-0934b580", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/
2311-0934b580", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0)
- failing through to other trunks") in new stack
-- Executing [0954215012@from-internal:5] Macro("SIP/
2311-0934b580", "dialout-trunk|1|954215012||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/2311-0934b580",
"DIAL_TRUNK=1") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/
2311-0934b580", "0?sub-pincheck|s|1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/2311-0934b580",
"0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/2311-0934b580",
"DIAL_NUMBER=954215012") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/2311-0934b580",
"DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/2311-0934b580",
"OUTBOUND_GROUP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/2311-0934b580",
"1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/2311-0934b580",
"0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/2311-0934b580",
"DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/2311-0934b580",
"outbound-callerid|1") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/
2311-0934b580", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/
2311-0934b580", "0|Set|REALCALLERIDNUM=2311") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/
2311-0934b580", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/
2311-0934b580", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/
2311-0934b580", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/
2311-0934b580", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/
2311-0934b580", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/
2311-0934b580", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/
2311-0934b580", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/
2311-0934b580", "0|SetCallerPres|prohib_passed_screen") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/
2311-0934b580", "0|AGI|fixlocalprefix") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/2311-0934b580",
"OUTNUM=954215012") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/2311-0934b580",
"custom=DAHDI/g0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/
2311-0934b580", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/2311-0934b580",
"dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/
2311-0934b580", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/
2311-0934b580", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/
2311-0934b580", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/2311-0934b580",
"DAHDI/g0/954215012|300|") in new stack
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:20] Goto("SIP/2311-0934b580",
"s-CONGESTION|1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/
2311-0934b580", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,3)
-- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/
2311-0934b580", "TRUNK Dial failed due to CONGESTION - failing through
to other trunks") in new stack
-- Executing [0954215012@from-internal:6] Macro("SIP/
2311-0934b580", "outisbusy|") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/2311-0934b580",
"all-circuits-busy-now|noanswer") in new stack
-- <SIP/2311-0934b580> Playing 'all-circuits-busy-now' (language
'en')
-- Executing [s@macro-outisbusy:2] Playback("SIP/2311-0934b580",
"pls-try-call-later|noanswer") in new stack
-- <SIP/2311-0934b580> Playing 'pls-try-call-later' (language
'en')
-- Executing [s@macro-outisbusy:3] Macro("SIP/2311-0934b580",
"hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/2311-0934b580", "1?
skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/2311-0934b580", "1?
skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/2311-0934b580", "1?
theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/2311-0934b580",
"") in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/
2311-0934b580' in macro 'hangupcall'
== Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/
2311-0934b580' in macro 'outisbusy'
== Spawn extension (from-internal, 0954215012, 6) exited non-zero on
'SIP/2311-0934b580'
-- Executing [h@from-internal:1] Macro("SIP/2311-0934b580",
"hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/2311-0934b580", "1?
skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/2311-0934b580", "1?
skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/2311-0934b580", "1?
theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/2311-0934b580",
"") in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/
2311-0934b580' in macro 'hangupcall'
== Spawn extension (from-internal, s, 1) exited non-zero on 'SIP/
2311-0934b580'

Juan Carlos Valero

unread,
Nov 19, 2009, 3:54:51 AM11/19/09
to aster...@googlegroups.com
Cuanto daño ha hecho elastix...


|     -- Executing [s@macro-dialout-trunk:19] Dial("SIP/2311-0934b580",
| "DAHDI/1/954215012|300|") in new stack
|   == Everyone is busy/congested at this time (1:0/0/1)

Faltaria ver la salida de ejecutar dahdi_cfg -vv a ver si la tarjeta esta bien configurada. En principio nos esta diciendo que la linea esta ocupada, ahora hace falta ver porque...


Un saludo,

Juan Carlos Valero
Capa Tres Soluciones Tecnológicas S.L.
Datos de contacto en http://capatres.tel
-------------------------------------------------------------------------

sol...@gmail.com

unread,
Nov 19, 2009, 5:28:44 AM11/19/09
to asterisk-es
Esto es una lista de Asterisk, no de Elastix.
Si empiezas de 0, yo te recomendaría que te leas algunos manuales de
Asterisk, lo instales en la distribución de linux que más te guste y
juegues un poco con los conf y la consola. Así aprenderás un poco de
que va el tema y con no demasiado esfuerzo podrás hacer llamadas en
poco tiempo.
Elastix tiene integrado un interfaz web y muchos otros programas
además de Asterisk. El interfaz web está basado en freepbx (que
también lo puedes instalar suelto y facilita la configuración de
Asterisk) pero tiene muchas más funciones que tendrás que aprender a
utilizar y es más difícil configurarlo todo y que funcione, ya que hay
más programas interactuando entre ellos.
Si sólo quieres una pbx: usa asterisk, así aprenderás las bases. Si
quieres todo lo que te puede ofrecer Elastix, deberías aprender a usar
Asterisk también y muchas cosas más.

Paco Gil

unread,
Nov 19, 2009, 7:16:07 AM11/19/09
to aster...@googlegroups.com
vaya... y cuanto dinero le ha hecho ganar a otros!!!!

2009/11/19 Juan Carlos Valero <jcva...@capatres.com>

Carlos

unread,
Nov 19, 2009, 7:05:28 AM11/19/09
to asterisk-es
Lo bueno de empezar de cero es que no temo a los retos... ¿¿que
recomiendas que me instale?? cojo cualquier distribucion linux y le
instalo asterisk desde los repositorios ¿que version?. Descargo el
asterisk now? Estoy en vuestras manos.
> > -------------------------------------------------------------------------- Ocultar texto de la cita -
>
> - Mostrar texto de la cita -

Paco Gil

unread,
Nov 19, 2009, 7:20:17 AM11/19/09
to aster...@googlegroups.com
con elastix te va bien... solo tienes que saber si tu tarjeta dahdi esta arriba o no...

que te sale con dahdi_tool?

2009/11/19 Carlos <carlosmar...@gmail.com>

Iñaki Baz Castillo

unread,
Nov 19, 2009, 7:48:57 AM11/19/09
to aster...@googlegroups.com
El día 19 de noviembre de 2009 13:20, Paco Gil <pag...@gmail.com> escribió:
> con elastix te va bien... solo tienes que saber si tu tarjeta dahdi esta
> arriba o no...

Paco, una cosa es no demonizar los interfaces gui y otra es sugerir el
uso de Elastix/FreePBX como primera toma de contacto con Asterisk
cuando otros miembros de la lista le están sugiriendo empezar con
Asterisk a pelo para entender las bases, cosa que obviamente tiene más
sentido que empezar con un gui.

--
Iñaki Baz Castillo
<ib...@xtratelecom.es>
Departamento de VoIP

Paco Gil

unread,
Nov 19, 2009, 7:51:13 AM11/19/09
to aster...@googlegroups.com


2009/11/19 Iñaki Baz Castillo <ib...@xtratelecom.es>


El día 19 de noviembre de 2009 13:20, Paco Gil <pag...@gmail.com> escribió:
> con elastix te va bien... solo tienes que saber si tu tarjeta dahdi esta
> arriba o no...

Paco, una cosa es no demonizar los interfaces gui y otra es sugerir el
uso de Elastix/FreePBX como primera toma de contacto con Asterisk
cuando otros miembros de la lista le están sugiriendo empezar con
Asterisk a pelo para entender las bases, cosa que obviamente tiene más
sentido que empezar con un gui.

pero si lo tiene todo montado!!!! solo le falta que rule dahdi....
 

Iñaki Baz Castillo

unread,
Nov 19, 2009, 8:00:38 AM11/19/09
to aster...@googlegroups.com
El día 19 de noviembre de 2009 13:51, Paco Gil <pag...@gmail.com> escribió:
>> Paco, una cosa es no demonizar los interfaces gui y otra es sugerir el
>> uso de Elastix/FreePBX como primera toma de contacto con Asterisk
>> cuando otros miembros de la lista le están sugiriendo empezar con
>> Asterisk a pelo para entender las bases, cosa que obviamente tiene más
>> sentido que empezar con un gui.
>
> pero si lo tiene todo montado!!!! solo le falta que rule dahdi....

Pero él no sabe si lo tiene montado o no.
Empezar con Elastix o cualquier enlatado supone meter el CD y cerrar
los ojos mientras pulsas Intro compulsivamente rezando para que no
falle nada y mágicamente funcione todo.

sol...@gmail.com

unread,
Nov 19, 2009, 8:44:42 AM11/19/09
to asterisk-es
Yo personalmente uso Elastix bastante, de hecho soy moderador de los
foros.
Pero para un usuario que empieza de 0, yo le recomendaría lo que ya he
dicho.
No sirve de mucho tener Elastix si no tienes ni idea de lo que hay
debajo. Puede funcionar, pero si tienes un problema estás jodido. Y
además tienes muchos más programas y servicios de los que preocuparte
y por tanto de los que aprender.

sol...@gmail.com

unread,
Nov 19, 2009, 9:01:24 AM11/19/09
to asterisk-es
Además, así echo balones fuera de los foros de Elastix! XDD

sol...@gmail.com

unread,
Nov 19, 2009, 9:07:38 AM11/19/09
to asterisk-es
Para el que no entienda la expresión 'echar balones fuera':

http://culturitalia.uibk.ac.at/hispanoteca/Foro-preguntas/ARCHIVO-Foro/Tirar%20balones%20fuera.htm

que luego se pueden malinterpretar las frases y la gente se
mosquea. ;)

Samuel cornú

unread,
Nov 19, 2009, 9:14:10 AM11/19/09
to aster...@googlegroups.com
Creo, en mi modesta opinion, que seria bueno que arranque de 0 con asterisk, sin ningun enlatado, el ha sido muy honesto en contarnos su historia, contandonos sus intenciones.. Aprovechando esa sinceridad no seria bueno preguntarle, que quiere.. si hacer andar esa placa y listo o si esta deseoso de conocer nuevos horizontes, con todo lo que ello implica.
saludos
--
Samuel Cornú

Williams Cardona

unread,
Nov 19, 2009, 9:29:38 AM11/19/09
to aster...@googlegroups.com
Buenas gente.
ESO es lo malo de que algunos dicen bajate Asterisk que es gratis y listo tienes una pbx, ellos son felices soñadores, y tienen el descaro de ofrecer elastix, trixbox, y decir tengo Asterisk para los clientes.
Es impresionante como esas Distribuciones han tomado mercado y ahora hasta hay niveles Business y toda la cosas.

En mi Opinion la Lista debemos ofrecer ayuda a Asterisk, elastix y Trixbox tienen sus foros y ayudas y todo lo que quieran como novatos.

Como bien lo ha hecho Iñaki y Raul en algunas ocasiones que a la gente que pide help en elastix o trixbox le dan el hilo de estas y no seguir sopesando lineas en esta lista de dichas distribuciones.

Estamos para ayudar pero cada cosa en su zapato.

Atte

William Cardona

2009/11/19 Samuel cornú <sam...@gmail.com>

Ramses II

unread,
Nov 19, 2009, 1:41:42 PM11/19/09
to aster...@googlegroups.com
Te puedes ir a Linux y ejecutar lo que te ha comentado Juan Carlos.

A parte, podrías ver en la consola si te aparecen lo canales configurados:

dahdi show status

dahdi show channels

dahdi show channel 1

Lo que me parece curioso es que lo mande al canal en vez de al grupo G0:

> > | -- Executing [s@macro-dialout-trunk:19] Dial("SIP/2311-0934b580",
> > | "DAHDI/1/954215012|300|") in new stack
> > | == Everyone is busy/congested at this time (1:0/0/1)

Lo mismo has creado tú un trunk distinto al de por defecto, pero eso ya es
configuración web, a no ser que te hayas movido por los ficheros de texto,
que lo dudo en primeras nupcias..., aunque veo que ya has trasteado con la
consola...

Ojito a lo que tienes en los ficheros:

#include dahdi-channels.conf
#include chan_dahdi_additional.conf

Te pueden estar machacando la configuración del chan_dahdi.conf.

Eso sí, aquí solo se te podrá ayudar a nivel Asterisk, su Dialplan y su
gente, para temas específicos sobre la gestión web y otros similares, sigue
los consejos que ya te han comentado, tienes foros específicos...


Saludos,

Ramses

-----Mensaje original-----
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En
nombre de Carlos
Enviado el: jueves, 19 de noviembre de 2009 13:05
Para: asterisk-es
Asunto: [Asterisk-ES] Re: Cabezazos contra la pared

Carlos

unread,
Nov 20, 2009, 3:30:47 AM11/20/09
to asterisk-es
Aqui teneis todo los datos adicionales que tengo. Gracias por vuestra
paciencia

dahdi show status
Description Alarms IRQ
bpviol CRC4
Wildcard TDM410P Board 1 OK 1
0 0

dahdi show channels

Chan Extension Context Language MOH Interpret
pseudo default default
1 from-pstn default


dahdi show channel 1

Channel: 1I>
File Descriptor: 16
Span: 1*CLI>
Extension: >
Dialing: no>
Context: from-pstn
Caller ID: >
Calling TON: 0
Caller ID name:
Destroy: 0I>
InAlarm: 1I>
Signalling Type: FXS Kewlstart
Radio: 0CLI>
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1I>
Propagated Conference: -1
Real in conference: 0
DSP: no*CLI>
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps unless TDM bridged, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Onhook

dahdi_cfg -vv

DAHDI Tools Version - 2.2.0

DAHDI Version: 2.2.0.2
Echo Canceller(s): OSLEC
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves:
01)

1 channels to configure.

Setting echocan for channel 1 to oslec

cuervo2006

unread,
Nov 20, 2009, 5:05:57 AM11/20/09
to asterisk-es
Buenos dias, este problemas de las tarjetas con elastix es bastante
comun, casi nunca anda con la autoconfiguracion, y tira congestion
aunque paresca bien configurada, si solo tienes la FXO en el archivo
chan_dahdi.conf comenta #include dahdi-channels.conf que esta final, y
el contenido de ese archivo lo pones en el mismo chan_dahdi.conf
prueba si anda. saludos

Juan
www.soloasterisk.com

Ramses II

unread,
Nov 20, 2009, 11:35:48 AM11/20/09
to aster...@googlegroups.com
Parece como si no tuvieses la línea conectada:

InAlarm: 1I>

Prueba a pinchar la línea en el que crees que es el módulo 4.


Saludos,

Ramses

-----Mensaje original-----
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En
nombre de Carlos
Enviado el: viernes, 20 de noviembre de 2009 9:31
Para: asterisk-es
Asunto: [Asterisk-ES] Re: Cabezazos contra la pared


Carlos

unread,
Nov 23, 2009, 10:28:42 AM11/23/09
to asterisk-es
Gracias a vuestros consejos y que ahora se trastear un poquillo el
Asterisk ya hago llamadas, pero no recibo os cuelgo lo que pone en el
cli a ver si me podeis dar otra de vuestras acertadas pistas.

Connected to Asterisk 1.4.26.1 currently running on elastix (pid =
2614)
Verbosity was 3 and is now 15
-- Starting simple switch on 'DAHDI/1-1'
-- Executing [s@from-pstn:1] NoOp("DAHDI/1-1", "No DID or CID
Match") in new stack
-- Executing [s@from-pstn:2] Answer("DAHDI/1-1", "") in new stack
-- Executing [s@from-pstn:3] Wait("DAHDI/1-1", "2") in new stack
-- Executing [s@from-pstn:4] Playback("DAHDI/1-1", "ss-noservice")
in new stack
-- <DAHDI/1-1> Playing 'ss-noservice' (language 'en')
-- Executing [s@from-pstn:5] SayAlpha("DAHDI/1-1", "") in new
stack
-- Executing [s@from-pstn:6] Hangup("DAHDI/1-1", "") in new stack
== Spawn extension (from-pstn, s, 6) exited non-zero on 'DAHDI/1-1'
-- Executing [h@from-pstn:1] Hangup("DAHDI/1-1", "") in new stack
== Spawn extension (from-pstn, h, 1) exited non-zero on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
Gracias una vez mas por vuestra ayuda de antemano.

Carlos

Ramses II

unread,
Nov 23, 2009, 11:14:59 AM11/23/09
to aster...@googlegroups.com
Carlos, un par de cosas:

- Una: Esto funciona de la forma en que conforme vas solucionando cositas,
las vas contando para que pueda servir a otros que puedan llegar a la lista
con los mismo problemas.

- Dos: Puede ser que no estés mandando las llamadas entrantes a una
Extensión por defecto en el caso de que no coincida con ningún CID o DID.


Saludos,

Ramses

-----Mensaje original-----
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En
nombre de Carlos
Enviado el: lunes, 23 de noviembre de 2009 16:29
Para: asterisk-es
Asunto: [Asterisk-ES] Re: Cabezazos contra la pared


Carlos

unread,
Nov 24, 2009, 3:01:00 AM11/24/09
to asterisk-es
Perdonar mi falta de experiencia pero es que como la solucion me la
habeis dado y he seguido paso a paso lo que me habeis sugerido no crei
necesario contar como lo solucione.

El caso es que comente en el archivo chan dahdi.con la linea #include
dahdi-channels.conf que esta final, y copie el contenido de ese
archivo, dahdi-channels.conf, al final del archivo chan dadhi.conf y
empezaron a funcionar por fin las llamadas salientes.

Una vez mas disculparme por no haber explicado la forma en que lo he
solucionado ya que no lo hice con malicia.

Un saludo

Carlos

Carlos

unread,
Nov 24, 2009, 4:10:04 AM11/24/09
to asterisk-es
Por fin ya tengo centralita. Ya recibo llamadas y puedo hacerlas
perfectamente ademas en el caso de que no este por trabajo me salen
unos reportes excelentes sobre el numero que ha llamado y la hora.
Muchisimas gracias.

El tema de las llamadas entrantes ha sido muy facil de solucionar. En
el asterisk without tears te dicen que debes crear un did para
asociarlo a un numero de canal zap. Pues no le hagais ni caso, eso
funcionara con zaptel pero en dahdi en mucho mas sencillo. Una vez
bien configurada la tarjeta digium con modulo FXO tdm410 en mi caso
simplemente con que vayais a rutas entrantes pongais una descripcion y
selecciones un grupo de timbrado o extension todo queda listo.

Muchisimas gracias de nuevo por poner mi centralita en marcha y
enseñarme que no hay que empezar la casa por el tejado. Aprender
asterisk primero y cuando sepais ya elegireis una distribucion como
trixbox o elastix.

Un saludo

Carlos

Ramses II

unread,
Nov 24, 2009, 2:11:53 PM11/24/09
to aster...@googlegroups.com
Pues eso, no hacedle caso a Carlos, lo de los DID asociados a Canales Zap
funcionan tanto en Zaptel como en DAHDI, te lo juro por un perrito chico, lo
que pasa es que tiene más chicha y es para otros propósitos...

Por cierto, en vez de "asterisk without tears", ¿no estarás hablando de
"Elastix without tears"?

En definitiva, lo único que te hacía falta era una ruta por defecto...


Saludos,

Ramses

-----Mensaje original-----
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En
nombre de Carlos
Enviado el: martes, 24 de noviembre de 2009 10:10
Para: asterisk-es
Asunto: [Asterisk-ES] Re: Cabezazos contra la pared


Janeth

unread,
Dec 3, 2009, 2:55:07 PM12/3/09
to asterisk-es
Hola a todos soy nueva en este grupo y en asterisk...

Bueno he leído este foro y he hecho todo lo que se describe pero al
recibir las llamadas en asterisk me muestra el siguiente mensaje:

-- Starting simple switch on 'DAHDI/2-1'
[Dec 3 14:27:25] NOTICE[7598]: chan_dahdi.c:6833 ss_thread: Got event
18 (Ring Begin)...
== Starting DAHDI/2-1 at from-pstn,s,1 failed so falling back to
exten 's'
== Starting DAHDI/2-1 at from-pstn,s,1 still failed so falling back
to context 'default'
[Dec 3 14:27:25] WARNING[7598]: pbx.c:2437 __ast_pbx_run: Channel
'DAHDI/2-1' sent into invalid extension 's' in context 'default', but
no invalid handler
-- Hungup 'DAHDI/2-1'

Por favor ayuda... Llevo varios días en este problema

Gracias

Elio Rojano

unread,
Dec 3, 2009, 6:09:58 PM12/3/09
to aster...@googlegroups.com
Hola Janeth,

Lo primero, cuando quieras preguntar algo, escribe diréctamente a 'aster...@googlegroups.com'.
No respondas a un email a no ser que vayas a responder a alguien.

Lo segundo: tienes una tarjeta analógica que busca esto:
[from-pstn]
exten=>s,1,...

y no lo encuentra
Como no lo encuentra, lo busca en:
[default]
exten=>s,1,...

y tampoco lo encuentra, así que, aburrido de buscar, decide colgar la llamada.

;P
--
http://www.sinologic.net/

Jose Galvez

unread,
Dec 3, 2009, 6:12:44 PM12/3/09
to aster...@googlegroups.com
Te aconsejo pasarte por los foros en castellano de elastix.
Alli te pueden ayudar, esta lista de correo es para Asterisk unicamente...

Suerte

Jose

Iñaki Baz Castillo

unread,
Dec 3, 2009, 6:52:07 PM12/3/09
to aster...@googlegroups.com
El día 4 de diciembre de 2009 00:12, Jose Galvez
<joseg...@gmail.com> escribió:

>
> Te aconsejo pasarte por los foros en castellano de elastix.
> Alli te pueden ayudar, esta lista de correo es para Asterisk unicamente...

Esto... ¿me he perdido algo? ¿cómo sabes que usa Elastix? XD

Elio Rojano

unread,
Dec 4, 2009, 5:00:12 AM12/4/09
to aster...@googlegroups.com
..."piensa el ladrón que todos son de su misma condicion..."
--
http://www.sinologic.net/

Jose Galvez

unread,
Dec 4, 2009, 5:15:54 AM12/4/09
to aster...@googlegroups.com
Carlos te aconsejo pasarte por los foros en castellano de elastix.
Alli te pueden ayudar, esta lista de correo es para Asterisk unicamente...

Suerte

Jose

2009/11/19 Carlos <carlosmar...@gmail.com>:
>
> Soy instalador de redes al que un cliente que no le pagaba le dio a
> modo de trueque una tarjeta digium con 1 modulo FXO y un telefono
> LINKSYS SPA491. Me convencio diciendome que podia montar una
> centralita facilmente con una linea analogica. Mis unicos
> conocimientos sobre asterisk vienen de leer el Elastix without tears y
> comunicaciones unificadas con elaxtix. Unicamente quiero realizar
> llamadas y recibirlas. Os copio mi system.conf y mi chan_dahdi.conf
> ademas de lo que el cli me dice cuando intento llamar. Mi version de
> Elastix es la 1.6-12. Estoy dispuesto ha hacer lo que sea incluso
> cambiar de distribucion ya que escogi la elastix porque al parecer era
> la mas sencilla de utilizar. Mi agradecimiento por adelantado.
>
> systen.conf
>
> # Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
> fxsks=1
> echocanceller=oslec,1
> # channel 2, WCTDM/0/1, no module.
> # channel 3, WCTDM/0/2, no module.
> # channel 4, WCTDM/0/3, no module.
>
> # Global data
>
> loadzone        = es
> defaultzone     = es
>
> chan_dahdi.conf
>
> [trunkgroups]
>
> [channels]
> context=from-pstn
> signalling=fxs_ks
> rxwink=300              ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes
> ;Uncomment these lines if you have problems with the disconection of
> your analog lines
> busydetect=yes
> busycount=3
> channel => 1
>
> immediate=no
>
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
> elastix*cli
>
>  -- Executing [0954215012@from-internal:1] Macro("SIP/2311-0934b580",
> "user-callerid|SKIPTTL|") in new stack
>    -- Executing [s@macro-user-callerid:1] Set("SIP/2311-0934b580",
> "AMPUSER=2311") in new stack
>    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/2311-0934b580",
> "0?report") in new stack
>    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/2311-0934b580",
> "1|Set|REALCALLERIDNUM=2311") in new stack
>    -- Executing [s@macro-user-callerid:4] Set("SIP/2311-0934b580",
> "AMPUSER=2311") in new stack
>    -- Executing [s@macro-user-callerid:5] Set("SIP/2311-0934b580",
> "AMPUSERCIDNAME=2311") in new stack
>    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/2311-0934b580",
> "0?report") in new stack
>    -- Executing [s@macro-user-callerid:7] Set("SIP/2311-0934b580",
> "AMPUSERCID=2311") in new stack
>    -- Executing [s@macro-user-callerid:8] Set("SIP/2311-0934b580",
> "CALLERID(all)="2311" <2311>") in new stack
>    -- Executing [s@macro-user-callerid:9] ExecIf("SIP/2311-0934b580",
> "0|Set|CHANNEL(language)=") in new stack
>    -- Executing [s@macro-user-callerid:10] GotoIf("SIP/
> 2311-0934b580", "1?continue") in new stack
>    -- Goto (macro-user-callerid,s,19)
>    -- Executing [s@macro-user-callerid:19] NoOp("SIP/2311-0934b580",
> "Using CallerID "2311" <2311>") in new stack
>    -- Executing [0954215012@from-internal:2] Set("SIP/2311-0934b580",
> "_NODEST=") in new stack
>    -- Executing [0954215012@from-internal:3] Macro("SIP/
> 2311-0934b580", "record-enable|2311|OUT|") in new stack
>    -- Executing [s@macro-record-enable:1] GotoIf("SIP/2311-0934b580",
> "1?check") in new stack
>    -- Goto (macro-record-enable,s,4)
>    -- Executing [s@macro-record-enable:4] AGI("SIP/2311-0934b580",
> "recordingcheck|20091119-004036|1258587636.7") in new stack
>    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
>  recordingcheck|20091119-004036|1258587636.7: Outbound recording not
> enabled
>    -- AGI Script recordingcheck completed, returning 0
>    -- Executing [s@macro-record-enable:5] MacroExit("SIP/
> 2311-0934b580", "") in new stack
>    -- Executing [0954215012@from-internal:4] Macro("SIP/
> 2311-0934b580", "dialout-trunk|2|954215012||") in new stack
>    -- Executing [s@macro-dialout-trunk:1] Set("SIP/2311-0934b580",
> "DIAL_TRUNK=2") in new stack
>    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/
> 2311-0934b580", "0?sub-pincheck|s|1") in new stack
>    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/2311-0934b580",
> "0?disabletrunk|1") in new stack
>    -- Executing [s@macro-dialout-trunk:4] Set("SIP/2311-0934b580",
> "DIAL_NUMBER=954215012") in new stack
>    -- Executing [s@macro-dialout-trunk:5] Set("SIP/2311-0934b580",
> "DIAL_TRUNK_OPTIONS=tr") in new stack
>    -- Executing [s@macro-dialout-trunk:6] Set("SIP/2311-0934b580",
> "OUTBOUND_GROUP=OUT_2") in new stack
>    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/2311-0934b580",
> "0?nomax") in new stack
>    -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/2311-0934b580",
> "0?chanfull") in new stack
>    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/2311-0934b580",
> "0?skipoutcid") in new stack
>    -- Executing [s@macro-dialout-trunk:10] Set("SIP/2311-0934b580",
> "DIAL_TRUNK_OPTIONS=") in new stack
>    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/2311-0934b580",
> "outbound-callerid|2") in new stack
>    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/
> 2311-0934b580", "0|SetCallerPres|") in new stack
>    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/
> 2311-0934b580", "0|Set|REALCALLERIDNUM=2311") in new stack
>    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/
> 2311-0934b580", "1?normcid") in new stack
>    -- Goto (macro-outbound-callerid,s,6)
>    -- Executing [s@macro-outbound-callerid:6] Set("SIP/
> 2311-0934b580", "USEROUTCID=") in new stack
>    -- Executing [s@macro-outbound-callerid:7] Set("SIP/
> 2311-0934b580", "EMERGENCYCID=") in new stack
>    -- Executing [s@macro-outbound-callerid:8] Set("SIP/
> 2311-0934b580", "TRUNKOUTCID=") in new stack
>    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/
> 2311-0934b580", "1?trunkcid") in new stack
>    -- Goto (macro-outbound-callerid,s,12)
>    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/
> 2311-0934b580", "0|Set|CALLERID(all)=") in new stack
>    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/
> 2311-0934b580", "0|Set|CALLERID(all)=") in new stack
>    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/
> 2311-0934b580", "0|SetCallerPres|prohib_passed_screen") in new stack
>    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/
> 2311-0934b580", "1|AGI|fixlocalprefix") in new stack
>    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
>       >  fixlocalprefix: Using pattern XX.
>  ==  fixlocalprefix: Dialpattern XX. matched. 954215012 -> 954215012
>    -- AGI Script fixlocalprefix completed, returning 0
>    -- Executing [s@macro-dialout-trunk:13] Set("SIP/2311-0934b580",
> "OUTNUM=954215012") in new stack
>    -- Executing [s@macro-dialout-trunk:14] Set("SIP/2311-0934b580",
> "custom=DAHDI/1") in new stack
>    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/
> 2311-0934b580", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
>    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/2311-0934b580",
> "dialout-trunk-predial-hook|") in new stack
>    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/
> 2311-0934b580", "") in new stack
>    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/
> 2311-0934b580", "0?bypass|1") in new stack
>    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/
> 2311-0934b580", "0?customtrunk") in new stack
>    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/2311-0934b580",
> "DAHDI/1/954215012|300|") in new stack
>  == Everyone is busy/congested at this time (1:0/0/1)
>    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/2311-0934b580",
> "s-CHANUNAVAIL|1") in new stack
>    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
>    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/
> 2311-0934b580", "1?noreport") in new stack
>    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
>    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/
> 2311-0934b580", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0)
> - failing through to other trunks") in new stack
>    -- Executing [0954215012@from-internal:5] Macro("SIP/
> 2311-0934b580", "dialout-trunk|1|954215012||") in new stack
>    -- Executing [s@macro-dialout-trunk:1] Set("SIP/2311-0934b580",
> "DIAL_TRUNK=1") in new stack
>    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/
> 2311-0934b580", "0?sub-pincheck|s|1") in new stack
>    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/2311-0934b580",
> "0?disabletrunk|1") in new stack
>    -- Executing [s@macro-dialout-trunk:4] Set("SIP/2311-0934b580",
> "DIAL_NUMBER=954215012") in new stack
>    -- Executing [s@macro-dialout-trunk:5] Set("SIP/2311-0934b580",
> "DIAL_TRUNK_OPTIONS=tr") in new stack
>    -- Executing [s@macro-dialout-trunk:6] Set("SIP/2311-0934b580",
> "OUTBOUND_GROUP=OUT_1") in new stack
>    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/2311-0934b580",
> "1?nomax") in new stack
>    -- Goto (macro-dialout-trunk,s,9)
>    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/2311-0934b580",
> "0?skipoutcid") in new stack
>    -- Executing [s@macro-dialout-trunk:10] Set("SIP/2311-0934b580",
> "DIAL_TRUNK_OPTIONS=") in new stack
>    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/2311-0934b580",
> "outbound-callerid|1") in new stack
>    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/
> 2311-0934b580", "0|SetCallerPres|") in new stack
>    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/
> 2311-0934b580", "0|Set|REALCALLERIDNUM=2311") in new stack
>    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/
> 2311-0934b580", "1?normcid") in new stack
>    -- Goto (macro-outbound-callerid,s,6)
>    -- Executing [s@macro-outbound-callerid:6] Set("SIP/
> 2311-0934b580", "USEROUTCID=") in new stack
>    -- Executing [s@macro-outbound-callerid:7] Set("SIP/
> 2311-0934b580", "EMERGENCYCID=") in new stack
>    -- Executing [s@macro-outbound-callerid:8] Set("SIP/
> 2311-0934b580", "TRUNKOUTCID=") in new stack
>    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/
> 2311-0934b580", "1?trunkcid") in new stack
>    -- Goto (macro-outbound-callerid,s,12)
>    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/
> 2311-0934b580", "0|Set|CALLERID(all)=") in new stack
>    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/
> 2311-0934b580", "0|Set|CALLERID(all)=") in new stack
>    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/
> 2311-0934b580", "0|SetCallerPres|prohib_passed_screen") in new stack
>    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/
> 2311-0934b580", "0|AGI|fixlocalprefix") in new stack
>    -- Executing [s@macro-dialout-trunk:13] Set("SIP/2311-0934b580",
> "OUTNUM=954215012") in new stack
>    -- Executing [s@macro-dialout-trunk:14] Set("SIP/2311-0934b580",
> "custom=DAHDI/g0") in new stack
>    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/
> 2311-0934b580", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
>    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/2311-0934b580",
> "dialout-trunk-predial-hook|") in new stack
>    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/
> 2311-0934b580", "") in new stack
>    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/
> 2311-0934b580", "0?bypass|1") in new stack
>    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/
> 2311-0934b580", "0?customtrunk") in new stack
>    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/2311-0934b580",
> "DAHDI/g0/954215012|300|") in new stack
>  == Everyone is busy/congested at this time (1:0/1/0)
>    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/2311-0934b580",
> "s-CONGESTION|1") in new stack
>    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
>    -- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/
> 2311-0934b580", "1?noreport") in new stack
>    -- Goto (macro-dialout-trunk,s-CONGESTION,3)
>    -- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/
> 2311-0934b580", "TRUNK Dial failed due to CONGESTION - failing through
> to other trunks") in new stack
>    -- Executing [0954215012@from-internal:6] Macro("SIP/
> 2311-0934b580", "outisbusy|") in new stack
>    -- Executing [s@macro-outisbusy:1] Playback("SIP/2311-0934b580",
> "all-circuits-busy-now|noanswer") in new stack
>    -- <SIP/2311-0934b580> Playing 'all-circuits-busy-now' (language
> 'en')
>    -- Executing [s@macro-outisbusy:2] Playback("SIP/2311-0934b580",
> "pls-try-call-later|noanswer") in new stack
>    -- <SIP/2311-0934b580> Playing 'pls-try-call-later' (language
> 'en')
>    -- Executing [s@macro-outisbusy:3] Macro("SIP/2311-0934b580",
> "hangupcall") in new stack
>    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/2311-0934b580", "1?
> skiprg") in new stack
>    -- Goto (macro-hangupcall,s,4)
>    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/2311-0934b580", "1?
> skipblkvm") in new stack
>    -- Goto (macro-hangupcall,s,7)
>    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/2311-0934b580", "1?
> theend") in new stack
>    -- Goto (macro-hangupcall,s,9)
>    -- Executing [s@macro-hangupcall:9] Hangup("SIP/2311-0934b580",
> "") in new stack
>  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/
> 2311-0934b580' in macro 'hangupcall'
>  == Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/
> 2311-0934b580' in macro 'outisbusy'
>  == Spawn extension (from-internal, 0954215012, 6) exited non-zero on
> 'SIP/2311-0934b580'
>    -- Executing [h@from-internal:1] Macro("SIP/2311-0934b580",
> "hangupcall") in new stack
>    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/2311-0934b580", "1?
> skiprg") in new stack
>    -- Goto (macro-hangupcall,s,4)
>    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/2311-0934b580", "1?
> skipblkvm") in new stack
>    -- Goto (macro-hangupcall,s,7)
>    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/2311-0934b580", "1?
> theend") in new stack
>    -- Goto (macro-hangupcall,s,9)
>    -- Executing [s@macro-hangupcall:9] Hangup("SIP/2311-0934b580",
> "") in new stack
>  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/
> 2311-0934b580' in macro 'hangupcall'
>  == Spawn extension (from-internal, s, 1) exited non-zero on 'SIP/
> 2311-0934b580'
>
> >
>

Ramses II

unread,
Dec 4, 2009, 6:00:24 AM12/4/09
to aster...@googlegroups.com
Jose, buenos días,

Janeth [lajan...@yahoo.es] != Carlos

¿no?

Carlos ya solucionó su problema en su día...

Janeth es que ha roto el hilo...


Saludos,

Ramses

-----Mensaje original-----
De: aster...@googlegroups.com [mailto:aster...@googlegroups.com] En
nombre de Jose Galvez
Enviado el: viernes, 04 de diciembre de 2009 11:16
Para: aster...@googlegroups.com
Asunto: [Asterisk-ES] Re: Cabezazos contra la pared


Reply all
Reply to author
Forward
0 new messages