Not iGating From RF to APRS-IS

[Kevin Kleinfelter]

I have a new installation of aprx 2.07 on Ubuntu.  It receives frames on RF and writes them to /var/log/aprx-rf.log, but it doesn't send anything to APRS-IS.  Please help me figure out why nothing is gated to the Internet.

Active lines in my config file:

mycall  K4KPK

<aprsis>

server   noam.aprs2.net

</aprsis>

<logging>

pidfile /var/run/aprx.pid

rflog /var/log/aprx/aprx-rf.log

aprxlog /var/log/aprx/aprx.log

</logging>

<interface>

   serial-device /dev/ttyUSB0  1200 8n1    KISS

</interface>

Note: I have tried mycall as both K4KPK and as K4KPK-0.  I have also tried server rotate.aprs2.net.

Thanks!

Kevin / K4KPK

[9W2 CEH]

I think you missed the tx true statement...

[Mohd Hamid Misnan]

You seems to be missing the <digipeater> </digipeater> section.

--
You received this message because you are subscribed to the Google Groups "Aprx software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to aprx-softwar...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Mohd Hamid Misnan]

Sorry, I was wrong .. digipeater is not needed for RX-Igate :( 

[Kevin Kleinfelter]

Aha!  I'm now half-way there.  When I send an APRS message from my HT, it *does* get gated to APRS-IS.  When my HT beacons its position, those frames do not get gated.

What do I need to change in order for my HT's position reports to get iGated?

TNX,

Kevin / K4KPK