Beagle Android Build released

[Rupesh Gujare]

Hi All,

In continuation to our efforts, for Android port on Beagle, we are
pleased to release Beagle-Android build.

Our Goal is to have stable customized Android build for Beagle Board.
We will try to add features and make sure Android works on Beagle Board
out of Box.

Here are steps to sync Beagle-Android build over repo:-

1. mkdir beagledroid
2. cd beagledroid
3. repo init -u
git://labs.embinux.org/repo/android/platform/beaglemanifest.git/
4. repo sync
5. make

Beagle Kernel with Android patches is located in kernel directory.

Enjoy Androing ...

Regards,

--
Rupesh Gujare
http://embinux.com

[Skuld]

Dear Rupesh:

I download and build it.
It can't run Music application in Android system.
When I execute music application, it will happen error.
(Error Message: The process android.process.acore has stopped
unexpectedly. Please try again)
Are there any suggestion ?
Thank you

[Rupesh Gujare]

Skuld,
 We have not yet integrated ALSA support in build. Build is still in early release, We will try to bring in ALSA support. Please feel free to share your work if you get it working.

Regards,

-- 
Rupesh Gujare
http://embinux.com

[androkun]

Dear Rupesh:

Great work

I can run android on beagleboard rev.c, but my kernel can not boot,
so I use old one.

Please upload your .config file.

Regards

[Rupesh Gujare]

Hi,
  You can get .config file in kernel directory at following location

 arch/arm/configs/omap3_beagle_android_defconfig

Regards,

-- 
Rupesh Gujare
http://embinux.com

[androkun]

Dear Rupesh:

thank for your infromation.

I build kernel with your configration file, but I could not boot
again.

I show new versions message and old version one.

Load Address and Entry Pont are different.

Is there any suggestion for setting right parameter

regards


New Version ----------------------------------------------------------

U-Boot 2009.01-00013-g52eddcd (Feb 03 2009 - 22:22:56)

OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 256 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Board revision C
Serial #
Hit any key to stop autoboot: 0
reading uImage

1478044 bytes read
## Booting kernel from Legacy Image at 80300000 ...
Image Name: Linux-2.6.27-omap1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1477980 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ...


Old Version ----------------------------------------------------------

U-Boot 2009.01-00013-g52eddcd (Feb 03 2009 - 22:22:56)

OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 256 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Board revision C
Serial #
Hit any key to stop autoboot: 0
reading uImage

1938360 bytes read
## Booting kernel from Legacy Image at 80300000 ...
Image Name: Linux-2.6.27-omap1-05246-g5d103d
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1938296 Bytes = 1.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK