> Sorry for the delay. I think you are right Chenchen, I obtain the same
> behaviour, so, I guess the problem is in the Android source code...
> Well, we will wait for a new Android release solving this issue.
> Regards.
> On 9 feb, 15:58, Ming <ming030...@gmail.com> wrote:
> > Exactly same problem with you.
> > I am using UA-767-PBT-C
> > After connected to the device, I can see the Connection State is
> > "Connected" and "Reading data..." and a green icon.
> > However, I can never see data.
> > In log ,I keep receiving dalvikm - GC_CONCURRENT freed 494K ..., and
> > sometime even reboot!
> > Do u solve the problem? Thank You.
> > On Feb 2, 7:05 pm, jfernandez <jorge.fernandez.gonza...@gmail.com>
> > wrote:
> > > Hi all,
> > > I have observed a strange and undesirable behaviour that I'm going to
> > > describe. When anHDPchannel is stablished, the Android system starts
> > > a long proccess of freeing memory (I have lots of Logcat messages like
> > > "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the
> > > system crashes and the smartphone is rebooted. I don't know if this is
> > > a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does
> > > anybody has the same problem?
> > > > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0
> > > > Ice Cream Sandwich) in my Android smartphone. When I have registered
> > > > the application in order to receive data, and I have paired the
> > > > biomedical device with the smartphone, I try to open the channel
> > > > connection and I can see that the device starts sending data to the
> > > > smartphone. However, the smartphone isunableto open the channel
> > > > connectionHDP.
> > > > At the end of this message you can see the output obtained in the
> > > > LogCat.
> > > > Has anybody achieved to run successfully this sample about the use of
> > > > theBluetoothHealth Profile API? Any ideas?
> Thx all, with the effort of two days, now I can read the data from the
> device
> But Do you all can get the same data displayed on the screen? I
> cannot parse the data correctly.
> As I know, the data should follow the ieee100407,but it seems that it
> does not follow 100%...
> I search for the Internet and find the parser implemented in python
> code ,https://gitorious.org/hdpy/hdpy/blobs/master/src/hdp/dummy_ieee10407a...
> I port the code in Java, and I have a list of blood pressure.
> The pressure make senses (SP > MP >DP), but all the value is just not
> the value printed on the screen of device.
> Best Regards.
> On Feb 9, 11:04 pm, jfernandez <jorge.fernandez.gonza...@gmail.com>
> wrote:
> > Hi Chenchen and Ming,
> > Sorry for the delay. I think you are right Chenchen, I obtain the same
> > behaviour, so, I guess the problem is in the Android source code...
> > Well, we will wait for a new Android release solving this issue.
> > Regards.
> > On 9 feb, 15:58, Ming <ming030...@gmail.com> wrote:
> > > Exactly same problem with you.
> > > I am using UA-767-PBT-C
> > > After connected to the device, I can see the Connection State is
> > > "Connected" and "Reading data..." and a green icon.
> > > However, I can never see data.
> > > In log ,I keep receiving dalvikm - GC_CONCURRENT freed 494K ..., and
> > > sometime even reboot!
> > > Do u solve the problem? Thank You.
> > > On Feb 2, 7:05 pm, jfernandez <jorge.fernandez.gonza...@gmail.com>
> > > wrote:
> > > > Hi all,
> > > > I have observed a strange and undesirable behaviour that I'm going to
> > > > describe. When anHDPchannel is stablished, the Android system starts
> > > > a long proccess of freeing memory (I have lots of Logcat messages like
> > > > "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the
> > > > system crashes and the smartphone is rebooted. I don't know if this is
> > > > a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does
> > > > anybody has the same problem?
> > > > > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0
> > > > > Ice Cream Sandwich) in my Android smartphone. When I have registered
> > > > > the application in order to receive data, and I have paired the
> > > > > biomedical device with the smartphone, I try to open the channel
> > > > > connection and I can see that the device starts sending data to the
> > > > > smartphone. However, the smartphone isunableto open the channel
> > > > > connectionHDP.
> > > > > At the end of this message you can see the output obtained in the
> > > > > LogCat.
> > > > > Has anybody achieved to run successfully this sample about the use of
> > > > > theBluetoothHealth Profile API? Any ideas?
> I will test the new version of Android 4.0.4 on Monday. I will comment
> if the problem is fixed or not.
> Regards.
> On 9 feb, 16:04, jfernandez <jorge.fernandez.gonza...@gmail.com>
> wrote:
> > Hi Chenchen and Ming,
> > Sorry for the delay. I think you are right Chenchen, I obtain the same
> > behaviour, so, I guess the problem is in the Android source code...
> > Well, we will wait for a new Android release solving this issue.
> > Regards.
> > On 9 feb, 15:58, Ming <ming030...@gmail.com> wrote:
> > > Exactly same problem with you.
> > > I am using UA-767-PBT-C
> > > After connected to the device, I can see the Connection State is
> > > "Connected" and "Reading data..." and a green icon.
> > > However, I can never see data.
> > > In log ,I keep receiving dalvikm - GC_CONCURRENT freed 494K ..., and
> > > sometime even reboot!
> > > Do u solve the problem? Thank You.
> > > On Feb 2, 7:05 pm, jfernandez <jorge.fernandez.gonza...@gmail.com>
> > > wrote:
> > > > Hi all,
> > > > I have observed a strange and undesirable behaviour that I'm going to
> > > > describe. When anHDPchannel is stablished, the Android system starts
> > > > a long proccess of freeing memory (I have lots of Logcat messages like
> > > > "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the
> > > > system crashes and the smartphone is rebooted. I don't know if this is
> > > > a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does
> > > > anybody has the same problem?
> > > > > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0
> > > > > Ice Cream Sandwich) in my Android smartphone. When I have registered
> > > > > the application in order to receive data, and I have paired the
> > > > > biomedical device with the smartphone, I try to open the channel
> > > > > connection and I can see that the device starts sending data to the
> > > > > smartphone. However, the smartphone isunableto open the channel
> > > > > connectionHDP.
> > > > > At the end of this message you can see the output obtained in the
> > > > > LogCat.
> > > > > Has anybody achieved to run successfully this sample about the use of
> > > > > theBluetoothHealth Profile API? Any ideas?
I've tried to post in this thread earlier, but not sure if it worked so I decided to duplicate my message.
So, thanks for a lot of useful information, it was a blast to read this thread while connecting android 4.0 phone with Nonin Oximeter sensor.
Everything seems to work fine, sensor is connected to a phone through application and a green indicator is on. But when it comes to interpreting the data, I might need some tips.
I receive a raw data (54 bytes) from sensor which represents an associate request. Then my manager should reply on this request choosing from the following options: (a) accept (b) unknown configuration (c) accepted with extended configuration
I send a respond (b) and get 140 bytes with as I guess sensor's configuration. I can also send a attribute request and the sensor response with 188 bytes including the name of the company and type of sensor.
I am a bit lost in all these bytes, requests, responses. Does anyone have any tips or approach for interpreting sensor data?
regards, Gregory
Den torsdagen den 15:e december 2011 kl. 18:30:08 UTC+1 skrev jfernandez:
> I'm executing the Bluetooth HDP Demo [1] (offered from Android 4.0 > Ice Cream Sandwich) in my Android smartphone. When I have registered > the application in order to receive data, and I have paired the > biomedical device with the smartphone, I try to open the channel > connection and I can see that the device starts sending data to the > smartphone. However, the smartphone is unable to open the channel > connection HDP.
> At the end of this message you can see the output obtained in the > LogCat.
> Has anybody achieved to run successfully this sample about the use of > the Bluetooth Health Profile API? Any ideas?
It was a blast to read your thread while I was trying
to connect android 4.0 phone with Nonin Oximeter last months.
The connection works fine and I can see green indicator
together with "Connected" section on the screen.
Then it was time to implement a manager and that is
when I got some problems.
So I am able to receive (as a raw data) 54 bytes which look as
following:
"e2000032800000000001002a5079002680..."
As I figured out from IEEE 11073-10404 specifications this
first byte array is sending an associate request, on which my manager
has to
reply using one of the options:
(a) accept (b) unknown configuration (c) accept with unknown
configuration
I will describe next steps I decided to take, but first I just wanna
make sure that i am on the right way.
Let me know if I got it all wrong.
Any tips are appreciated.
regards,
Gregory
On Feb 9, 4:04 pm, jfernandez <jorge.fernandez.gonza...@gmail.com>
wrote:
> Sorry for the delay. I think you are right Chenchen, I obtain the same
> behaviour, so, I guess the problem is in the Android source code...
> Well, we will wait for a new Android release solving this issue.
> Regards.
> On 9 feb, 15:58, Ming <ming030...@gmail.com> wrote:
> > Exactly same problem with you.
> > I am using UA-767-PBT-C
> > After connected to the device, I can see the Connection State is
> > "Connected" and "Reading data..." and a green icon.
> > However, I can never see data.
> > In log ,I keep receiving dalvikm - GC_CONCURRENT freed 494K ..., and
> > sometime even reboot!
> > Do u solve the problem? Thank You.
> > On Feb 2, 7:05 pm, jfernandez <jorge.fernandez.gonza...@gmail.com>
> > wrote:
> > > Hi all,
> > > I have observed a strange and undesirable behaviour that I'm going to
> > > describe. When anHDPchannel is stablished, the Android system starts
> > > a long proccess of freeing memory (I have lots of Logcat messages like
> > > "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the
> > > system crashes and the smartphone is rebooted. I don't know if this is
> > > a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does
> > > anybody has the same problem?
> > > > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0
> > > > Ice Cream Sandwich) in my Android smartphone. When I have registered
> > > > the application in order to receive data, and I have paired the
> > > > biomedical device with the smartphone, I try to open the channel
> > > > connection and I can see that the device starts sending data to the
> > > > smartphone. However, the smartphone isunableto open the channel
> > > > connectionHDP.
> > > > At the end of this message you can see the output obtained in the
> > > > LogCat.
> > > > Has anybody achieved to run successfully this sample about the use of
> > > > theBluetoothHealth Profile API? Any ideas?
I have been working with NexusS(4.0.4) + Nonin 9560bt several last day buy still have no results(I received result from device only once, cannot reproduce it again). It refuses connection,
06-25 16:17:48.117: D/HSSHDP(2103): connectChannel(): app configuration name HSSHDP
06-25 16:17:48.129: W/HSSHDP(2103): prevState 0 ----------> newState 1
06-25 16:17:48.476: D/BluetoothEventLoop(136): Device property changed: 00:1C:05:00:6C:D8 property: Connected value: true
06-25 16:17:48.859: E/BluetoothEventLoop.cpp(136): onHealthDeviceConnectionResult: D-Bus error: org.bluez.Error.HealthError (Connection refused (111))
06-25 16:17:48.859: D/BluetoothEventLoop(136): onHealthDeviceConnectionResult 12 6001
06-25 16:17:48.871: W/HSSHDP(2103): prevState 1 ----------> newState 0
Could you please share any solution, please?
Пʼятниця, 20 січня 2012 р. 18:00:10 UTC+2 користувач Raul Ruiz написав:
> I have Nonin working with HDP, if someone need help tell me.
> On 14 ene, 13:07, jfernandez <jorge.fernandez.gonza...@gmail.com> > wrote: > > Hi Fernando,
> > I have introduced a change in the implementation of the > > BluetoothHealthCallback mHealthCallback. Exactly, in its method > > onHealthChannelStateChange(...). I detected that the state machine > > during the stablishment of a new HDP connection is: Disconnected- > > Connecting-Connected. However, you can see that the example is > > checking the case Disconnected-Connected, but not the case Connecting- > > Connected. I added this new case Connecting-Connected, and now it > > works and I'm able to read/write data from/to UA-767PBT-C and a board > > that emulates several biomedical devices.
> > I hope it help you.
> > Regards.
> > On 14 ene, 12:35, Fernando Almeida <reala...@gmail.com> wrote:
> > > Hi jfernandez... i upgrade my android version to 4.03 and still can't > > > connect...
> > > Could you please show me the changes that you made?
> > > > Well, after upgrading my Android 4.0 to 4.03, and adding some > changes > > > > to the BluetoothHDPsample, I'm able to connect to the biomedical > > > > device, as well as I'm able to read/write data from/to theHDP > > > > channel. So, it seems the problem has been fixed in this new Android > > > > version.
> > > > > I'm executing theBluetoothHDPDemo [1] (offered from Android 4.0 > > > > > Ice Cream Sandwich) in my Android smartphone. When I have > registered > > > > > the application in order to receive data, and I have paired the > > > > > biomedical device with the smartphone, I try to open the channel > > > > > connection and I can see that the device starts sending data to > the > > > > > smartphone. However, the smartphone is unable to open the channel > > > > > connectionHDP.
> > > > > At the end of this message you can see the output obtained in the > > > > > LogCat.
> > > > > Has anybody achieved to run successfully this sample about the use > of > > > > > theBluetoothHealth Profile API? Any ideas?
There are NexusS 4.0.4 available, Does anybody use it together with Nonin 9560bt? For me it refuse connection constantly. (but once I was able to read data from the device, cannnot reproduce this result)
I logcat:
06-25 16:17:48.117: D/HSSHDP(2103): connectChannel(): app configuration name HSSHDP
06-25 16:17:48.129: W/HSSHDP(2103): prevState 0 ----------> newState 1
06-25 16:17:48.476: D/BluetoothEventLoop(136): Device property changed: 00:1C:05:00:6C:D8 property: Connected value: true
06-25 16:17:48.859: E/BluetoothEventLoop.cpp(136): onHealthDeviceConnectionResult: D-Bus error: org.bluez.Error.HealthError (Connection refused (111))
06-25 16:17:48.859: D/BluetoothEventLoop(136): onHealthDeviceConnectionResult 12 6001
06-25 16:17:48.871: W/HSSHDP(2103): prevState 1 ----------> newState 0
Any ideas how to use this device?
Четвер, 15 грудня 2011 р. 19:30:08 UTC+2 користувач jfernandez написав:
> I'm executing the Bluetooth HDP Demo [1] (offered from Android 4.0
> Ice Cream Sandwich) in my Android smartphone. When I have registered
> the application in order to receive data, and I have paired the
> biomedical device with the smartphone, I try to open the channel
> connection and I can see that the device starts sending data to the
> smartphone. However, the smartphone is unable to open the channel
> connection HDP.
> At the end of this message you can see the output obtained in the
> LogCat.
> Has anybody achieved to run successfully this sample about the use of
> the Bluetooth Health Profile API? Any ideas?
I've had the same problem for half a year. My device is Galaxy Nexus SC-04D ver4.0.4. I've not solved this problem yet, in spite of half a year researches. I gradually be sure that this is a bug of unregisterAppConfig(). Here is a report about this problem. Google android group http://code.google.com/p/android/issues/detail?id=26704&can=1&q=hdp&c...
I think this is a only way to report the bug to Android API developers, because developer.android.com provides this forum as a Support. So, I want you to add a star or comment to this issue, if you have the same problem. And wish to be debug.
On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
> Hi all,
> I have observed a strange and undesirable behaviour that I'm going to > describe. When an HDP channel is stablished, the Android system starts > a long proccess of freeing memory (I have lots of Logcat messages like > "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the > system crashes and the smartphone is rebooted. I don't know if this is > a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does > anybody has the same problem?
> Thanks and regards!
> On 15 dic 2011, 18:30, jfernandez <jorge.fernandez.gonza...@gmail.com> > wrote: > > Hi all,
> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0 > > Ice Cream Sandwich) in my Android smartphone. When I have registered > > the application in order to receive data, and I have paired the > > biomedical device with the smartphone, I try to open the channel > > connection and I can see that the device starts sending data to the > > smartphone. However, the smartphone isunableto open the channel > > connectionHDP.
> > At the end of this message you can see the output obtained in the > > LogCat.
> > Has anybody achieved to run successfully this sample about the use of > > the Bluetooth Health Profile API? Any ideas?
On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambitiouss...@gmail.com> wrote:
> Hi jfernandez and all.
> I've had the same problem for half a year.
> My device is Galaxy Nexus SC-04D ver4.0.4.
> I've not solved this problem yet, in spite of half a year researches.
> I gradually be sure that this is a bug of unregisterAppConfig().
> Here is a report about this problem.
> Google android group
> http://code.google.com/p/android/issues/detail?id=26704&can=1&q=hdp&c...
> I think this is a only way to report the bug to Android API developers,
> because developer.android.com provides this forum as a Support.
> So, I want you to add a star or comment to this issue, if you have the same
> problem.
> And wish to be debug.
> On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
>> Hi all,
>> I have observed a strange and undesirable behaviour that I'm going to
>> describe. When an HDP channel is stablished, the Android system starts
>> a long proccess of freeing memory (I have lots of Logcat messages like
>> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the
>> system crashes and the smartphone is rebooted. I don't know if this is
>> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does
>> anybody has the same problem?
>> Thanks and regards!
>> On 15 dic 2011, 18:30, jfernandez <jorge.fernandez.gonza...@gmail.com>
>> wrote:
>> > Hi all,
>> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0
>> > Ice Cream Sandwich) in my Android smartphone. When I have registered
>> > the application in order to receive data, and I have paired the
>> > biomedical device with the smartphone, I try to open the channel
>> > connection and I can see that the device starts sending data to the
>> > smartphone. However, the smartphone isunableto open the channel
>> > connectionHDP.
>> > At the end of this message you can see the output obtained in the
>> > LogCat.
>> > Has anybody achieved to run successfully this sample about the use of
>> > the Bluetooth Health Profile API? Any ideas?
> --
> You received this message because you are subscribed to the Google
> Groups "Android Developers" group.
> To post to this group, send email to android-developers@googlegroups.com
> To unsubscribe from this group, send email to
> android-developers+unsubscribe@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/android-developers?hl=en
Hi, thanks to reply. The problem is that ApplicationConfiguration remain, in spite of calling unregisterAppConfiguration(). I confirmed the demo can communicate with a health device at first time, but second time or later it cann't. Sometimes Android reboots when I unregister the application config and REregister. The demo can communicate only once whenever rebooting.
My health devices blood pressure: HEM-7081-IT weighing machine: HBF-206IT pedometer: HJ-720IT
I can communicate currectly with all of these devices and get health data.(only once whenever rebooting)
On Thursday, July 12, 2012 6:06:55 PM UTC+9, jfernandez wrote:
> Hi wambin:
> Could you tell more about the exact problem that you are experiencing? > And, what's the medical device that you are using?
> Regards.
> On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambitiouss...@gmail.com> wrote: > > Hi jfernandez and all.
> > I've had the same problem for half a year. > > My device is Galaxy Nexus SC-04D ver4.0.4. > > I've not solved this problem yet, in spite of half a year researches. > > I gradually be sure that this is a bug of unregisterAppConfig(). > > Here is a report about this problem. > > Google android group
> > I think this is a only way to report the bug to Android API developers, > > because developer.android.com provides this forum as a Support. > > So, I want you to add a star or comment to this issue, if you have the > same > > problem. > > And wish to be debug.
> > On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
> >> Hi all,
> >> I have observed a strange and undesirable behaviour that I'm going to > >> describe. When an HDP channel is stablished, the Android system starts > >> a long proccess of freeing memory (I have lots of Logcat messages like > >> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the > >> system crashes and the smartphone is rebooted. I don't know if this is > >> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does > >> anybody has the same problem?
> >> Thanks and regards!
> >> On 15 dic 2011, 18:30, jfernandez <jorge.fernandez.gonza...@gmail.com> > >> wrote: > >> > Hi all,
> >> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0 > >> > Ice Cream Sandwich) in my Android smartphone. When I have registered > >> > the application in order to receive data, and I have paired the > >> > biomedical device with the smartphone, I try to open the channel > >> > connection and I can see that the device starts sending data to the > >> > smartphone. However, the smartphone isunableto open the channel > >> > connectionHDP.
> >> > At the end of this message you can see the output obtained in the > >> > LogCat.
> >> > Has anybody achieved to run successfully this sample about the use of > >> > the Bluetooth Health Profile API? Any ideas?
> > -- > > You received this message because you are subscribed to the Google > > Groups "Android Developers" group. > > To post to this group, send email to android-developers@googlegroups.com > > To unsubscribe from this group, send email to > > android-developers+unsubscribe@googlegroups.com > > For more options, visit this group at > > http://groups.google.com/group/android-developers?hl=en
On Tue, Jul 17, 2012 at 7:59 AM, wambin <ambitiouss...@gmail.com> wrote:
> Hi, thanks to reply.
> The problem is that ApplicationConfiguration remain, in spite of calling
> unregisterAppConfiguration().
> I confirmed the demo can communicate with a health device at first time, but
> second time or later it cann't.
> Sometimes Android reboots when I unregister the application config and
> REregister.
> The demo can communicate only once whenever rebooting.
> My health devices
> blood pressure: HEM-7081-IT
> weighing machine: HBF-206IT
> pedometer: HJ-720IT
> I can communicate currectly with all of these devices and get health
> data.(only once whenever rebooting)
> On Thursday, July 12, 2012 6:06:55 PM UTC+9, jfernandez wrote:
>> Hi wambin:
>> Could you tell more about the exact problem that you are experiencing?
>> And, what's the medical device that you are using?
>> Regards.
>> On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambitiouss...@gmail.com> wrote:
>> > Hi jfernandez and all.
>> > I've had the same problem for half a year.
>> > My device is Galaxy Nexus SC-04D ver4.0.4.
>> > I've not solved this problem yet, in spite of half a year researches.
>> > I gradually be sure that this is a bug of unregisterAppConfig().
>> > Here is a report about this problem.
>> > Google android group
>> > I think this is a only way to report the bug to Android API developers,
>> > because developer.android.com provides this forum as a Support.
>> > So, I want you to add a star or comment to this issue, if you have the
>> > same
>> > problem.
>> > And wish to be debug.
>> > On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
>> >> Hi all,
>> >> I have observed a strange and undesirable behaviour that I'm going to
>> >> describe. When an HDP channel is stablished, the Android system starts
>> >> a long proccess of freeing memory (I have lots of Logcat messages like
>> >> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, the
>> >> system crashes and the smartphone is rebooted. I don't know if this is
>> >> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does
>> >> anybody has the same problem?
>> >> Thanks and regards!
>> >> On 15 dic 2011, 18:30, jfernandez <jorge.fernandez.gonza...@gmail.com>
>> >> wrote:
>> >> > Hi all,
>> >> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0
>> >> > Ice Cream Sandwich) in my Android smartphone. When I have registered
>> >> > the application in order to receive data, and I have paired the
>> >> > biomedical device with the smartphone, I try to open the channel
>> >> > connection and I can see that the device starts sending data to the
>> >> > smartphone. However, the smartphone isunableto open the channel
>> >> > connectionHDP.
>> >> > At the end of this message you can see the output obtained in the
>> >> > LogCat.
>> >> > Has anybody achieved to run successfully this sample about the use of
>> >> > the Bluetooth Health Profile API? Any ideas?
>> > --
>> > You received this message because you are subscribed to the Google
>> > Groups "Android Developers" group.
>> > To post to this group, send email to android-developers@googlegroups.com
>> > To unsubscribe from this group, send email to
>> > android-developers+unsubscribe@googlegroups.com
>> > For more options, visit this group at
>> > http://groups.google.com/group/android-developers?hl=en
> --
> You received this message because you are subscribed to the Google
> Groups "Android Developers" group.
> To post to this group, send email to android-developers@googlegroups.com
> To unsubscribe from this group, send email to
> android-developers+unsubscribe@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/android-developers?hl=en
For my 6 monthes reseach, I understand that below. No one can build Android HDP application with this HDP API. (Some people built HDP app to use Bluez with JNI. search in youtube.) I cann't find any Android HDP app in markets. (it has taken 6 monthes over since HDP API to be published!) So many people have troubles about HDP demo. Android API developers don't take any action about it. (4.1.1 jellybean has same problems http://code.google.com/p/android/issues/detail?id=26704&can=1&q=hdp&c...)
On Tuesday, July 17, 2012 4:49:41 PM UTC+9, jfernandez wrote:
> Hi wambin,
> Then, you have found the same troubles that all of us.
> Regards.
> On Tue, Jul 17, 2012 at 7:59 AM, wambin <ambitiouss...@gmail.com> wrote: > > Hi, thanks to reply. > > The problem is that ApplicationConfiguration remain, in spite of calling > > unregisterAppConfiguration(). > > I confirmed the demo can communicate with a health device at first time, > but > > second time or later it cann't. > > Sometimes Android reboots when I unregister the application config and > > REregister. > > The demo can communicate only once whenever rebooting.
> > My health devices > > blood pressure: HEM-7081-IT > > weighing machine: HBF-206IT > > pedometer: HJ-720IT
> > I can communicate currectly with all of these devices and get health > > data.(only once whenever rebooting)
> > On Thursday, July 12, 2012 6:06:55 PM UTC+9, jfernandez wrote:
> >> Hi wambin:
> >> Could you tell more about the exact problem that you are experiencing? > >> And, what's the medical device that you are using?
> >> Regards.
> >> On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambitiouss...@gmail.com> > wrote: > >> > Hi jfernandez and all.
> >> > I've had the same problem for half a year. > >> > My device is Galaxy Nexus SC-04D ver4.0.4. > >> > I've not solved this problem yet, in spite of half a year researches. > >> > I gradually be sure that this is a bug of unregisterAppConfig(). > >> > Here is a report about this problem. > >> > Google android group
> >> > I think this is a only way to report the bug to Android API > developers, > >> > because developer.android.com provides this forum as a Support. > >> > So, I want you to add a star or comment to this issue, if you have > the > >> > same > >> > problem. > >> > And wish to be debug.
> >> > On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
> >> >> Hi all,
> >> >> I have observed a strange and undesirable behaviour that I'm going > to > >> >> describe. When an HDP channel is stablished, the Android system > starts > >> >> a long proccess of freeing memory (I have lots of Logcat messages > like > >> >> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, > the > >> >> system crashes and the smartphone is rebooted. I don't know if this > is > >> >> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does > >> >> anybody has the same problem?
> >> >> Thanks and regards!
> >> >> On 15 dic 2011, 18:30, jfernandez < > jorge.fernandez.gonza...@gmail.com> > >> >> wrote: > >> >> > Hi all,
> >> >> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0 > >> >> > Ice Cream Sandwich) in my Android smartphone. When I have > registered > >> >> > the application in order to receive data, and I have paired the > >> >> > biomedical device with the smartphone, I try to open the channel > >> >> > connection and I can see that the device starts sending data to > the > >> >> > smartphone. However, the smartphone isunableto open the channel > >> >> > connectionHDP.
> >> >> > At the end of this message you can see the output obtained in the > >> >> > LogCat.
> >> >> > Has anybody achieved to run successfully this sample about the use > of > >> >> > the Bluetooth Health Profile API? Any ideas?
> >> > -- > >> > You received this message because you are subscribed to the Google > >> > Groups "Android Developers" group. > >> > To post to this group, send email to > android-developers@googlegroups.com > >> > To unsubscribe from this group, send email to > >> > android-developers+unsubscribe@googlegroups.com > >> > For more options, visit this group at > >> > http://groups.google.com/group/android-developers?hl=en
> > -- > > You received this message because you are subscribed to the Google > > Groups "Android Developers" group. > > To post to this group, send email to android-developers@googlegroups.com > > To unsubscribe from this group, send email to > > android-developers+unsubscribe@googlegroups.com > > For more options, visit this group at > > http://groups.google.com/group/android-developers?hl=en
I need help. I have Nonin 9560Bt, and i tried to run the project on a Android 4.0.4 device. I's not working. So, could you tell me what modifications did yout make to run the sample project?
On Friday, 20 January 2012 17:00:10 UTC+1, Raul Ruiz wrote:
> Hi all,
> I have Nonin working with HDP, if someone need help tell me.
> On 14 ene, 13:07, jfernandez <jorge.fernandez.gonza...@gmail.com> > wrote: > > Hi Fernando,
> > I have introduced a change in the implementation of the > > BluetoothHealthCallback mHealthCallback. Exactly, in its method > > onHealthChannelStateChange(...). I detected that the state machine > > during the stablishment of a new HDP connection is: Disconnected- > > Connecting-Connected. However, you can see that the example is > > checking the case Disconnected-Connected, but not the case Connecting- > > Connected. I added this new case Connecting-Connected, and now it > > works and I'm able to read/write data from/to UA-767PBT-C and a board > > that emulates several biomedical devices.
> > I hope it help you.
> > Regards.
> > On 14 ene, 12:35, Fernando Almeida <reala...@gmail.com> wrote:
> > > Hi jfernandez... i upgrade my android version to 4.03 and still can't > > > connect...
> > > Could you please show me the changes that you made?
> > > > Well, after upgrading my Android 4.0 to 4.03, and adding some > changes > > > > to the BluetoothHDPsample, I'm able to connect to the biomedical > > > > device, as well as I'm able to read/write data from/to theHDP > > > > channel. So, it seems the problem has been fixed in this new Android > > > > version.
> > > > > I'm executing theBluetoothHDPDemo [1] (offered from Android 4.0 > > > > > Ice Cream Sandwich) in my Android smartphone. When I have > registered > > > > > the application in order to receive data, and I have paired the > > > > > biomedical device with the smartphone, I try to open the channel > > > > > connection and I can see that the device starts sending data to > the > > > > > smartphone. However, the smartphone is unable to open the channel > > > > > connectionHDP.
> > > > > At the end of this message you can see the output obtained in the > > > > > LogCat.
> > > > > Has anybody achieved to run successfully this sample about the use > of > > > > > theBluetoothHealth Profile API? Any ideas?
I think that It's the only HDP application with HDP API in the world. It can communicate with these devices. A&D UC-321PBT-C A&D UA-767PBT-C A&D UC-411PBT-C
I don't have any of them. So I want someone who have these devices to check the steps below.
1.communicate with the device. 2.kill the app proccess or turn off Bluetooth in Android config. 3.try to recommunicate.
If you can recommunicate in step3, the application would unregister AppConfig correctly. And we can say that, there are some way to unregister AppConfig correctly and make HDP application what works fine.
On Tuesday, July 17, 2012 8:07:58 PM UTC+9, wambin wrote:
> For my 6 monthes reseach, I understand that below. > No one can build Android HDP application with this HDP API. > (Some people built HDP app to use Bluez with JNI. search in youtube.) > I cann't find any Android HDP app in markets. > (it has taken 6 monthes over since HDP API to be published!) > So many people have troubles about HDP demo. > Android API developers don't take any action about it. > (4.1.1 jellybean has same problems > http://code.google.com/p/android/issues/detail?id=26704&can=1&q=hdp&c... > )
> On Tuesday, July 17, 2012 4:49:41 PM UTC+9, jfernandez wrote:
>> Hi wambin,
>> Then, you have found the same troubles that all of us.
>> Regards.
>> On Tue, Jul 17, 2012 at 7:59 AM, wambin <ambiti...@gmail.com<javascript:>> >> wrote: >> > Hi, thanks to reply. >> > The problem is that ApplicationConfiguration remain, in spite of >> calling >> > unregisterAppConfiguration(). >> > I confirmed the demo can communicate with a health device at first >> time, but >> > second time or later it cann't. >> > Sometimes Android reboots when I unregister the application config and >> > REregister. >> > The demo can communicate only once whenever rebooting.
>> > My health devices >> > blood pressure: HEM-7081-IT >> > weighing machine: HBF-206IT >> > pedometer: HJ-720IT
>> > I can communicate currectly with all of these devices and get health >> > data.(only once whenever rebooting)
>> > On Thursday, July 12, 2012 6:06:55 PM UTC+9, jfernandez wrote:
>> >> Hi wambin:
>> >> Could you tell more about the exact problem that you are experiencing? >> >> And, what's the medical device that you are using?
>> >> Regards.
>> >> On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambiti...@gmail.com<javascript:>> >> wrote: >> >> > Hi jfernandez and all.
>> >> > I've had the same problem for half a year. >> >> > My device is Galaxy Nexus SC-04D ver4.0.4. >> >> > I've not solved this problem yet, in spite of half a year >> researches. >> >> > I gradually be sure that this is a bug of unregisterAppConfig(). >> >> > Here is a report about this problem. >> >> > Google android group
>> >> > I think this is a only way to report the bug to Android API >> developers, >> >> > because developer.android.com provides this forum as a Support. >> >> > So, I want you to add a star or comment to this issue, if you have >> the >> >> > same >> >> > problem. >> >> > And wish to be debug.
>> >> > On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
>> >> >> Hi all,
>> >> >> I have observed a strange and undesirable behaviour that I'm going >> to >> >> >> describe. When an HDP channel is stablished, the Android system >> starts >> >> >> a long proccess of freeing memory (I have lots of Logcat messages >> like >> >> >> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, >> the >> >> >> system crashes and the smartphone is rebooted. I don't know if this >> is >> >> >> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does >> >> >> anybody has the same problem?
>> >> >> Thanks and regards!
>> >> >> On 15 dic 2011, 18:30, jfernandez < >> jorge.fernandez.gonza...@gmail.com> >> >> >> wrote: >> >> >> > Hi all,
>> >> >> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0 >> >> >> > Ice Cream Sandwich) in my Android smartphone. When I have >> registered >> >> >> > the application in order to receive data, and I have paired the >> >> >> > biomedical device with the smartphone, I try to open the channel >> >> >> > connection and I can see that the device starts sending data to >> the >> >> >> > smartphone. However, the smartphone isunableto open the channel >> >> >> > connectionHDP.
>> >> >> > At the end of this message you can see the output obtained in the >> >> >> > LogCat.
>> >> >> > Has anybody achieved to run successfully this sample about the >> use of >> >> >> > the Bluetooth Health Profile API? Any ideas?
>> >> > -- >> >> > You received this message because you are subscribed to the Google >> >> > Groups "Android Developers" group. >> >> > To post to this group, send email to android-d...@googlegroups.com<javascript:> >> >> > To unsubscribe from this group, send email to >> >> > android-developers+unsubscribe@googlegroups.com <javascript:> >> >> > For more options, visit this group at >> >> > http://groups.google.com/group/android-developers?hl=en
>> > -- >> > You received this message because you are subscribed to the Google >> > Groups "Android Developers" group. >> > To post to this group, send email to android-d...@googlegroups.com<javascript:> >> > To unsubscribe from this group, send email to >> > android-developers+unsubscribe@googlegroups.com <javascript:> >> > For more options, visit this group at >> > http://groups.google.com/group/android-developers?hl=en
> I think that It's the only HDP application with HDP API in the world. > It can communicate with these devices. > A&D UC-321PBT-C > A&D UA-767PBT-C > A&D UC-411PBT-C
> I don't have any of them. > So I want someone who have these devices to check the steps below.
> 1.communicate with the device. > 2.kill the app proccess or turn off Bluetooth in Android config. > 3.try to recommunicate.
> If you can recommunicate in step3, the application would unregister > AppConfig correctly. > And we can say that, there are some way to unregister AppConfig correctly > and make HDP application what works fine.
> Thanks.
> On Tuesday, July 17, 2012 8:07:58 PM UTC+9, wambin wrote:
>> For my 6 monthes reseach, I understand that below. >> No one can build Android HDP application with this HDP API. >> (Some people built HDP app to use Bluez with JNI. search in youtube.) >> I cann't find any Android HDP app in markets. >> (it has taken 6 monthes over since HDP API to be published!) >> So many people have troubles about HDP demo. >> Android API developers don't take any action about it. >> (4.1.1 jellybean has same problems >> http://code.google.com/p/android/issues/detail?id=26704&can=1&q=hdp&c... >> )
>> On Tuesday, July 17, 2012 4:49:41 PM UTC+9, jfernandez wrote:
>>> Hi wambin,
>>> Then, you have found the same troubles that all of us.
>>> Regards.
>>> On Tue, Jul 17, 2012 at 7:59 AM, wambin <ambiti...@gmail.com> wrote: >>> > Hi, thanks to reply. >>> > The problem is that ApplicationConfiguration remain, in spite of >>> calling >>> > unregisterAppConfiguration(). >>> > I confirmed the demo can communicate with a health device at first >>> time, but >>> > second time or later it cann't. >>> > Sometimes Android reboots when I unregister the application config and >>> > REregister. >>> > The demo can communicate only once whenever rebooting.
>>> > My health devices >>> > blood pressure: HEM-7081-IT >>> > weighing machine: HBF-206IT >>> > pedometer: HJ-720IT
>>> > I can communicate currectly with all of these devices and get health >>> > data.(only once whenever rebooting)
>>> > On Thursday, July 12, 2012 6:06:55 PM UTC+9, jfernandez wrote:
>>> >> Hi wambin:
>>> >> Could you tell more about the exact problem that you are >>> experiencing? >>> >> And, what's the medical device that you are using?
>>> >> Regards.
>>> >> On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambiti...@gmail.com> >>> wrote: >>> >> > Hi jfernandez and all.
>>> >> > I've had the same problem for half a year. >>> >> > My device is Galaxy Nexus SC-04D ver4.0.4. >>> >> > I've not solved this problem yet, in spite of half a year >>> researches. >>> >> > I gradually be sure that this is a bug of unregisterAppConfig(). >>> >> > Here is a report about this problem. >>> >> > Google android group
>>> >> > I think this is a only way to report the bug to Android API >>> developers, >>> >> > because developer.android.com provides this forum as a Support. >>> >> > So, I want you to add a star or comment to this issue, if you have >>> the >>> >> > same >>> >> > problem. >>> >> > And wish to be debug.
>>> >> > On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
>>> >> >> Hi all,
>>> >> >> I have observed a strange and undesirable behaviour that I'm going >>> to >>> >> >> describe. When an HDP channel is stablished, the Android system >>> starts >>> >> >> a long proccess of freeing memory (I have lots of Logcat messages >>> like >>> >> >> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some occasions, >>> the >>> >> >> system crashes and the smartphone is rebooted. I don't know if >>> this is >>> >> >> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). Does >>> >> >> anybody has the same problem?
>>> >> >> Thanks and regards!
>>> >> >> On 15 dic 2011, 18:30, jfernandez < >>> jorge.fernandez.gonza...@gmail.com> >>> >> >> wrote: >>> >> >> > Hi all,
>>> >> >> > I'm executing the BluetoothHDPDemo [1] (offered from Android >>> 4.0 >>> >> >> > Ice Cream Sandwich) in my Android smartphone. When I have >>> registered >>> >> >> > the application in order to receive data, and I have paired the >>> >> >> > biomedical device with the smartphone, I try to open the channel >>> >> >> > connection and I can see that the device starts sending data to >>> the >>> >> >> > smartphone. However, the smartphone isunableto open the channel >>> >> >> > connectionHDP.
>>> >> >> > At the end of this message you can see the output obtained in >>> the >>> >> >> > LogCat.
>>> >> >> > Has anybody achieved to run successfully this sample about the >>> use of >>> >> >> > the Bluetooth Health Profile API? Any ideas?
>>> >> > -- >>> >> > You received this message because you are subscribed to the Google >>> >> > Groups "Android Developers" group. >>> >> > To post to this group, send email to android-d...@googlegroups.com >>> >> > To unsubscribe from this group, send email to >>> >> > android-developers+unsubscribe@googlegroups.com >>> >> > For more options, visit this group at >>> >> > http://groups.google.com/group/android-developers?hl=en
>>> > -- >>> > You received this message because you are subscribed to the Google >>> > Groups "Android Developers" group. >>> > To post to this group, send email to android-d...@googlegroups.com >>> > To unsubscribe from this group, send email to >>> > android-developers+unsubscribe@googlegroups.com >>> > For more options, visit this group at >>> > http://groups.google.com/group/android-developers?hl=en
Hi Greg. Thank you for your attempt. I tried to install the samsung app. But the app only support S3. My device is Galaxy Nexus SC-04D. So I wait anyone's testing.
>> I think that It's the only HDP application with HDP API in the world. >> It can communicate with these devices. >> A&D UC-321PBT-C >> A&D UA-767PBT-C >> A&D UC-411PBT-C
>> I don't have any of them. >> So I want someone who have these devices to check the steps below.
>> 1.communicate with the device. >> 2.kill the app proccess or turn off Bluetooth in Android config. >> 3.try to recommunicate.
>> If you can recommunicate in step3, the application would unregister >> AppConfig correctly. >> And we can say that, there are some way to unregister AppConfig correctly >> and make HDP application what works fine.
>> Thanks.
>> On Tuesday, July 17, 2012 8:07:58 PM UTC+9, wambin wrote:
>>> For my 6 monthes reseach, I understand that below. >>> No one can build Android HDP application with this HDP API. >>> (Some people built HDP app to use Bluez with JNI. search in youtube.) >>> I cann't find any Android HDP app in markets. >>> (it has taken 6 monthes over since HDP API to be published!) >>> So many people have troubles about HDP demo. >>> Android API developers don't take any action about it. >>> (4.1.1 jellybean has same problems >>> http://code.google.com/p/android/issues/detail?id=26704&can=1&q=hdp&c... >>> )
>>> On Tuesday, July 17, 2012 4:49:41 PM UTC+9, jfernandez wrote:
>>>> Hi wambin,
>>>> Then, you have found the same troubles that all of us.
>>>> Regards.
>>>> On Tue, Jul 17, 2012 at 7:59 AM, wambin <ambiti...@gmail.com> wrote: >>>> > Hi, thanks to reply. >>>> > The problem is that ApplicationConfiguration remain, in spite of >>>> calling >>>> > unregisterAppConfiguration(). >>>> > I confirmed the demo can communicate with a health device at first >>>> time, but >>>> > second time or later it cann't. >>>> > Sometimes Android reboots when I unregister the application config >>>> and >>>> > REregister. >>>> > The demo can communicate only once whenever rebooting.
>>>> > My health devices >>>> > blood pressure: HEM-7081-IT >>>> > weighing machine: HBF-206IT >>>> > pedometer: HJ-720IT
>>>> > I can communicate currectly with all of these devices and get health >>>> > data.(only once whenever rebooting)
>>>> > On Thursday, July 12, 2012 6:06:55 PM UTC+9, jfernandez wrote:
>>>> >> Hi wambin:
>>>> >> Could you tell more about the exact problem that you are >>>> experiencing? >>>> >> And, what's the medical device that you are using?
>>>> >> Regards.
>>>> >> On Tue, Jul 10, 2012 at 12:16 PM, wambin <ambiti...@gmail.com> >>>> wrote: >>>> >> > Hi jfernandez and all.
>>>> >> > I've had the same problem for half a year. >>>> >> > My device is Galaxy Nexus SC-04D ver4.0.4. >>>> >> > I've not solved this problem yet, in spite of half a year >>>> researches. >>>> >> > I gradually be sure that this is a bug of unregisterAppConfig(). >>>> >> > Here is a report about this problem. >>>> >> > Google android group
>>>> >> > I think this is a only way to report the bug to Android API >>>> developers, >>>> >> > because developer.android.com provides this forum as a Support. >>>> >> > So, I want you to add a star or comment to this issue, if you have >>>> the >>>> >> > same >>>> >> > problem. >>>> >> > And wish to be debug.
>>>> >> > On Thursday, February 2, 2012 8:05:51 PM UTC+9, jfernandez wrote:
>>>> >> >> Hi all,
>>>> >> >> I have observed a strange and undesirable behaviour that I'm >>>> going to >>>> >> >> describe. When an HDP channel is stablished, the Android system >>>> starts >>>> >> >> a long proccess of freeing memory (I have lots of Logcat messages >>>> like >>>> >> >> "dalvikm - GC_CONCURRENT freed 494K ..."), even in some >>>> occasions, the >>>> >> >> system crashes and the smartphone is rebooted. I don't know if >>>> this is >>>> >> >> a problem of my ROM/smartphone (I'm using Android 4.0.3 ICS). >>>> Does >>>> >> >> anybody has the same problem?
>>>> >> >> Thanks and regards!
>>>> >> >> On 15 dic 2011, 18:30, jfernandez < >>>> jorge.fernandez.gonza...@gmail.com> >>>> >> >> wrote: >>>> >> >> > Hi all,
>>>> >> >> > I'm executing the BluetoothHDPDemo [1] (offered from Android >>>> 4.0 >>>> >> >> > Ice Cream Sandwich) in my Android smartphone. When I have >>>> registered >>>> >> >> > the application in order to receive data, and I have paired the >>>> >> >> > biomedical device with the smartphone, I try to open the >>>> channel >>>> >> >> > connection and I can see that the device starts sending data to >>>> the >>>> >> >> > smartphone. However, the smartphone isunableto open the channel >>>> >> >> > connectionHDP.
>>>> >> >> > At the end of this message you can see the output obtained in >>>> the >>>> >> >> > LogCat.
>>>> >> >> > Has anybody achieved to run successfully this sample about the >>>> use of >>>> >> >> > the Bluetooth Health Profile API? Any ideas?
>>>> >> > -- >>>> >> > You received this message because you are subscribed to the Google >>>> >> > Groups "Android Developers" group. >>>> >> > To post to this group, send email to android-d...@googlegroups.com >>>> >> > To unsubscribe from this group, send email to >>>> >> > android-developers+unsubscribe@googlegroups.com >>>> >> > For more options, visit this group at >>>> >> > http://groups.google.com/group/android-developers?hl=en
>>>> > -- >>>> > You received this message because you are subscribed to the Google >>>> > Groups "Android Developers" group. >>>> > To post to this group, send email to android-d...@googlegroups.com >>>> > To unsubscribe from this group, send email to >>>> > android-developers+unsubscribe@googlegroups.com >>>> > For more options, visit this group at >>>> > http://groups.google.com/group/android-developers?hl=en
I have the same problem with Nonin 9560 pulse oximeter device. I tried to use BluetoothHDPService demo provided by android SDK, however, I even cannot get connect to it. When I first click the Register App button it shows 0 (means successful) in the status message bar. But then when I click Connect button and choose my paired device, it says -1 (failed) in the status message. Can anybody please help me in this case? By the way, I am registering with 0x1004 (pulse oximeter) code.
On Friday, December 16, 2011 11:31:16 AM UTC+1, Raul Ruiz wrote:
> Hi Jorge,
> What device are you using? I have a same problem using Nonin 9560BT > pulseoximeter. It conects and disconnects and any data had received in > the Android.
> Do you have any solution?
> Thanks
> On Dec 15, 6:30 pm, jfernandez <jorge.fernandez.gonza...@gmail.com> > wrote: > > Hi all,
> > I'm executing the BluetoothHDPDemo [1] (offered from Android 4.0 > > Ice Cream Sandwich) in my Android smartphone. When I have registered > > the application in order to receive data, and I have paired the > > biomedical device with the smartphone, I try to open the channel > > connection and I can see that the device starts sending data to the > > smartphone. However, the smartphone is unable to open the channel > > connectionHDP.
> > At the end of this message you can see the output obtained in the > > LogCat.
> > Has anybody achieved to run successfully this sample about the use of > > the Bluetooth Health Profile API? Any ideas?
