920-4DTV Re-Map

[CrowFoot]

I let unit sit overnight on G1-03 with power button off, and then
tried to get NET (T4-600s).

The video map for T4-603 (HD) was programmed on 600-602...but audio
maps were correct for each channel. Hence, all you could see was the
HD channel when on the SD channels, but correct audio for each channel
was right one.

There use to be a way (OPT-6-0-5) to reach a sub-menu and reset maps
so all would be refreshed....anyone recall this trick?

thx.

PS: On 920 unit, the higher number channels (T4-613....) came in
clear...I didn't think the 920 unit could pick these up???

[Carroll Robbins]

CrowFoot <Ta...@yellowmountain.net> wrote on Mon, 15 Sep 2008 13:19:46
-0500 in <oe9tc416qnhplb453...@4ax.com>

>I let unit sit overnight on G1-03 with power button off, and then
>tried to get NET (T4-600s).

This will not do a remap on the 920. You need to go to G1-03, turn the unit
off, and then unplug the unit. Wait about 30 seconds then replug the unit
to AC power. Wait about an hour before turning the unit on.

Also verify that your TDT is not at 1920. Go to Option-6-0-5 and then left
arrow to get to Diagnostics Screen G. The 5th number in the top line is
your TDT count. If it is 1920 you need to do a Master Reset.
--
Carroll Robbins

[CrowFoot]

On Tue, 16 Sep 2008 08:16:31 -0400, Carroll Robbins
<carroll...@ioa.com.invalid> wrote:

>Also verify that your TDT is not at 1920

I just went ahead and did a Master Reset....and am leaving it on G1
overnight.

I'll try again, after programming the birds, and see what T4
does...something was amiss on T4's map....on other birds, it was OK.

thx