Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

SNAFU: T-4: 600-603

0 views
Skip to first unread message

CrowFoot

unread,
Sep 17, 2008, 3:14:14 PM9/17/08
to
920 unit with HD unit

After doing Master Reset, T4-600-603 is still haywire.

The HD (T4-603) Video is on T4-600-602 channels.

But, everywhere else, 4DTV/HD units can see SD channels just fine.

There's something wrong with their T4 Map on 600-603...going thru HD
unit, all you see is the HD channel....but HD unit can handle SD
channels everywhere else.

This sucks

Edward A. Cowan

unread,
Sep 17, 2008, 10:52:05 PM9/17/08
to
I'm using a 922 unit. After the struggle to even get these channels, and
having finally been able to receive them, thanks to some help from this
newsgroup, I am able to see three distinctly different channels
(600-602), using an HD TV (Toshiba). OTOH, I cannot "see" T4,603!
--E.A.C.


CrowFoot <Ta...@yellowmountain.net> wrote:


--
hrabanus

CrowFoot

unread,
Sep 18, 2008, 8:41:35 PM9/18/08
to
On Wed, 17 Sep 2008 21:52:05 -0500, oldger...@nospam.com (Edward A.
Cowan) wrote:

>I cannot "see" T4,603!
>--E.A.C.
>

You have to have a HDD-200 unit

CrowFoot

unread,
Sep 18, 2008, 8:44:10 PM9/18/08
to
On Wed, 17 Sep 2008 21:52:05 -0500, oldger...@nospam.com (Edward A.
Cowan) wrote:

> I cannot "see" T4,603!
>--E.A.C.


HDD-200 Manual [GI-1999] English/French (html)

HDD-200 Manual [Motorola-2002] (html)

http://www.4dtvforum.com/downloads.php

Edward A. Cowan

unread,
Sep 18, 2008, 9:56:36 PM9/18/08
to
A follow-up:

This evening, arriving at T4,600 et al., I found no signal, although I
had gotten a signal for this transponder and 601 and 602 yesterday. So I
followed the example given here and unplugged my 622 unit for a while,
after which I plugged it in again, intending to leave it plugged in but
not turned on for the remainder of the night. I'll report back tomorrow
whether this measure helped the unit "remap" these NET channels.
--E.A.C.

CrowFoot

unread,
Sep 18, 2008, 11:10:23 PM9/18/08
to
On Thu, 18 Sep 2008 20:56:36 -0500, oldger...@nospam.com (Edward A.
Cowan) wrote:

>arriving at T4,600 et al., I found no signal,

Then, you did not have T4 in dish alignment...got to have a signal.

Any

unread,
Sep 19, 2008, 9:33:26 PM9/19/08
to
The thing we are dealing with increasingly are aging units and old
technology that are failing to keep up with the world. There are no new
4DTV designs being offered and unfortunately our problems will
increase. It is obvious the industry has no interest in us or providing
up to date products. A dismal outlook indeed.

Tony

0 new messages