I realise that the SIMH PDP10 does not simulate the necessary communications
hardware, but if I can find suitable documentation I could write that
myself.
However, I have a feeling that the minimum version of TOPS-20 required is
too high and so may need the KL which I know SIMH does not simulate.
Thanks
Rob
If you want to look at ethernet connection code for the KS, the
code was shipped with TOPS-10 7.03.
/BAH
Hmmmm. What ethernet hardware did people use on the KS? DEUNA? Anything else
supported? IIRC TCP/IP was never supported?
Mike
--
http://www.corestore.org
'As I walk along these shores
I am the history within'
DEUNA/DELUA is the only ones DEC had, so I would expect it to be them.
They are compatible enough that you use the same code to handle both.
(Different microcode in them, though. The DEUNA is T11-based, while the
DELUA is MC68K based.)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: b...@softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
The Panda distribution, which includes SIMH, does TCP/IP. I didn't try
if it does DECnet, since I don't really have anything to test it with.
> Rob
-Olaf
--
___ Olaf 'Rhialto' Seibert -- You author it, and I'll reader it.
\X/ rhialto/at/xs4all.nl -- Cetero censeo "authored" delendum esse.
> Robert Jarratt wrote:
> > Is it possible to get DECnet Phase IV and/or TCP/IP running on the SIMH
> > simulation of TOPS-20?
>
> The Panda distribution, which includes SIMH, does TCP/IP. I didn't try if
> it does DECnet, since I don't really have anything to test it with.
It is based on klh10, not simh.
Yours,
--
Jean-Marc