(Oops) Re: Patch: Elm 2.4ME+ PL115 (25) -> Elm 2.4ME+ PL115a (25)
Kari Hurtta
OOPS. Should be
Elm 2.4ME+ PL115a (25) -patch
Is available on ozone.FMI.FI (1)
via anonymous ftp
directory KEH/
file elm-2.4ME+PL115a.patch.gz
for a moment (2).
Is available on ftp.funet.fi
via anonymous ftp
directory pub/unix/mail/elm/elm-2.4ME+/
file elm-2.4ME+PL115a.patch.gz
Is available with
<URL: http://www.ozone.FMI.FI/KEH/elm-2.4ME+PL115a.patch.gz >
via WWW.
Is available with
<URL: http://personal.inet.fi/atk/elmme/elm-2.4ME+PL115a.patch.gz >
via WWW.
> (1) Was ftp.ozone.fmi.fi but name ftp.ozone.fmi.fi
> will probably point to service which no have anonymous ftp
> before ozone.fmi.fi retires. So use ozone.fmi.fi
> for a moment instead of ftp.ozone.fmi.fi.
>
> (2) NOTE:
>
> It is currently unknown what will be done for ftp.ozone.fmi.fi
> and www.ozone.fmi.fi.
>
> Also ozone.fmi.fi will retire.
>
For apply patch use command
patch -p1 < {path...}/elm-2.4ME+PL115a.patch
on top level directory of Elm 2.4ME+ distribution
ie. on directory where Configure is.)
> SUMMARY: This patch fixes handling of unexpected return
> value of nl_langinfo(CODESET) on AIX, fixes
> value check of "internal-mailcaps" and
> "metamail-mailcaps" elmrc variables and
> fixes some prompts on situation where leaving
> of folder fails.
>
> Notice: ME+ series is not official Elm.
/ Kari Hurtta
Kari Hurtta
> Archive-name: elmME+2.5/PLalpha4.0
>
> Elm ME+ 2.5 PLalpha4
>
> - Is available on ftp.funet.fi (or ftp.ipv6.funet.fi)
> via anonymous ftp
> directory pub/unix/mail/elm/elm-ME+2.5/
> files elm-ME+2.5.PLalpha4.patch.gz
> and elm-ME+2.5.alpha4.tar.gz
> or
> <URL: http://www.nic.funet.fi/pub/unix/mail/elm/elm-ME+2.5/elm-ME+2.5.PLalpha4.patch.gz >
> and <URL: http://www.nic.funet.fi/pub/unix/mail/elm/elm-ME+2.5/elm-ME+2.5.alpha4.tar.gz >
> via WWW.
>
> - Is available with (1)
> <URL: http://www.ozone.FMI.FI/KEH/elm-ME+2.5.PLalpha4.patch.gz >
> and <URL: http://www.ozone.FMI.FI/KEH/elm-ME+2.5.alpha.tar.gz >
should be http://www.ozone.fmi.fi/KEH/elm-ME+2.5.PLalpha4.patch.gz
> via WWW.
/ Kari Hurtta
Kari Hurtta
Experimental RPM spec file for ELM 2.4ME+ PL121f (25)
exists on <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+.html > directory
(and also on <URL: http://www.ozone.fmi.fi/KEH/rpm/elm-2.4ME+.html > directory).
I do not know rpm, so please do not blame me, if
I wipe your hardisk...
Files are following
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121f.spec >
RPM spec file
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121f-1.src.rpm >
Source rpm
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121f-1.i586.rpm >
Binary RPM build on Mandrake Linux 9.0
Spec file uses just elm-2.4ME+121.tar.gz, elm-2.4ME+PL121a.patch.gz,
elm-2.4ME+PL121b.patch.gz, elm-2.4ME+PL121c.patch.gz,
elm-2.4ME+PL121d.patch.gz, elm-2.4ME+PL121e.patch.gz
and elm-2.4ME+PL121f.patch.gz. No other patches are used.
Spec file compiles elm for binary distribution, so you must edit
/usr/local/lib/elm.rc before using Elm 2.4ME+. Following variables
need to be modified on elm.rc:
* mailer
* hostdomain (this is usually needed)
* hostfullname
* hostname (usually this is not needed)
Check default values written to elm.rc. It is (re-)generated during
installation.
For re-generation of following files, old
information (if exists) is used:
* /usr/local/lib/elm.rc
* /usr/local/lib/elm.mimecharsets
* /usr/local/lib/elm.terminalinfo
Old information is not preserved, but is used as input
during re-generation.
/ Kari Hurtta
ELM 2.4ME+ PL121f (25) changelog
Changes of Elm 2.4ME+ PL121f (25) compared with Elm 2.4ME+ PL121e (25)
----------------------------------------------------------------------
- Fix another "Append to mail folder " -question.
- Configure was incorrectly made conlusion that
nl_langinfo(CODESET)
do not work on IRIX 6.5
- If given folder name 'aaa@bbb@ccc' for split_remote_name(),
do not split is as user='aaa', host='bbb@ccc', but use
user='aaa@bbb', host='ccc'
Problem noted by: admin <ad...@unixdemon.com>
- Remove duplicates from bin/elm.mimecharsets
during Configure
- Compare charset names in case insensitive way on
ConfTool/GenCharmap
/ Kari Hurtta
Kari Hurtta
Experimental RPM spec file for ELM 2.4ME+ PL121g (25)
exists on <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+.html > directory
(and also on <URL: http://www.ozone.fmi.fi/KEH/rpm/elm-2.4ME+.html > directory).
I do not know rpm, so please do not blame me, if
I wipe your hardisk...
Files are following
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121g.spec >
RPM spec file
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121g-1.src.rpm >
Source rpm
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121g-1.i586.rpm >
Binary RPM build on Mandrake Linux 9.0
Spec file uses just elm-2.4ME+121.tar.gz, elm-2.4ME+PL121a.patch.gz,
elm-2.4ME+PL121b.patch.gz, elm-2.4ME+PL121c.patch.gz,
elm-2.4ME+PL121d.patch.gz, elm-2.4ME+PL121e.patch.gz,
elm-2.4ME+PL121f.patch.gz and elm-2.4ME+PL121g.patch.gz.
No other patches are used.
Spec file compiles elm for binary distribution, so you must edit
/usr/local/lib/elm.rc before using Elm 2.4ME+. Following variables
need to be modified on elm.rc:
* mailer
* hostdomain (this is usually needed)
* hostfullname
* hostname (usually this is not needed)
Check default values written to elm.rc. It is (re-)generated during
installation.
For re-generation of following files, old
information (if exists) is used:
* /usr/local/lib/elm.rc
* /usr/local/lib/elm.mimecharsets
* /usr/local/lib/elm.terminalinfo
Old information is not preserved, but is used as input
during re-generation.
/ Kari Hurtta
ELM 2.4ME+ PL121g (25) changelog
Changes of Elm 2.4ME+ PL121g (25) compared with Elm 2.4ME+ PL121f (25)
----------------------------------------------------------------------
- get_type_flags() was called with NULL-pointer
argument from start_body_helper() line 381.
Problem noted by: Vesa-Matti J Kari <vesa-ma...@helsinki.fi>
> Return something 'intelligent' (instead of
crashing) in functions of lib/mediatype.c,
if them is called with NULL argument.
- Do not give NULL pointer for
Content-Type: *unknown*/MIXED
In other words do not return NULL pointer
if give_media_type() is asked to create
major media type '*unknown*' ('*unknown*'
matched MIME_TYPE_UNKNOWN signaling unknown
media type.)
- Fixed Makefile error on
make package ROOT=/tmp/test-install
case
- Sorting orders 'mailbox order' and
'reverse mailbox order' was giving same order.
Fixed reverse sorting order.
- Little change for sorting.
- Ignore command letter 'm' on elm.filelist
(used on Elm 2.4ME+ PL122).
/ Kari Hurtta
Kari Hurtta
Experimental RPM spec file for ELM 2.4ME+ PL121h (25)
(and also on <URL: http://www.ozone.fmi.fi/KEH/rpm/elm-2.4ME+.html > directory).
I do not know rpm, so please do not blame me, if
I wipe your hardisk...
Files are following
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121h.spec >
RPM spec file
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121h-1.src.rpm >
Source rpm
- <URL: http://www.elmme-mailer.org/rpm/elm-2.4ME+121h-1.i586.rpm >
Binary RPM build on Mandrake Linux 9.0
Spec file uses just elm-2.4ME+121.tar.gz, elm-2.4ME+PL121a.patch.gz,
elm-2.4ME+PL121b.patch.gz, elm-2.4ME+PL121c.patch.gz,
elm-2.4ME+PL121d.patch.gz, elm-2.4ME+PL121e.patch.gz,
elm-2.4ME+PL121f.patch.gz, elm-2.4ME+PL121g.patch.gz
and elm-2.4ME+PL121h.patch.gz. No other patches are used.
Spec file compiles elm for binary distribution, so you must edit
/usr/local/lib/elm.rc before using Elm 2.4ME+. Following variables
need to be modified on elm.rc:
* mailer
* hostdomain (this is usually needed)
* hostfullname
* hostname (usually this is not needed)
Check default values written to elm.rc. It is (re-)generated during
installation.
For re-generation of following files, old
information (if exists) is used:
* /usr/local/lib/elm.rc
* /usr/local/lib/elm.mimecharsets
* /usr/local/lib/elm.terminalinfo
Old information is not preserved, but is used as input
during re-generation.
/ Kari Hurtta
ELM 2.4ME+ PL121h (25) changelog
Changes of Elm 2.4ME+ PL121h (25) compared with Elm 2.4ME+ PL121g (25)
----------------------------------------------------------------------
- On 21 lines window browser help (Folder selection)
was not fitting to screen.
- f)orget command on "Mail Pre-Send Screen" incorrectly
sent mail when editor buffer was empty and on mail
there was on attachment.
Kari Hurtta
>
> Changes on Elm ME+ 2.5 PLalpha5 compared with Elm2.4ME+ PLalpha4
> ----------------------------------------------------------------
>
This should of course be
Changes on Elm ME+ 2.5 PLalpha5 compared with Elm ME+ 2.5 PLalpha4
------------------------------------------------------------------
/ Kari Hurtta
Kari Hurtta
> <URL: http://koti.welho.com/khurtta/elm-2.4ME+PL122g.patch.gz >
> via WWW.
>
> directory pub/unix/mail/elm/elm-2.4ME+
> file elm-2.4ME+PL122g.patch.gz
> or
> <URL: http://www.nic.funet.fi/pub/unix/mail/elm/elm-2.4ME+/elm-2.4ME+PL122g.patch.gz >
> via WWW.
>
>
>
> Is not now available on ftp.funet.fi (or ftp.ipv6.funet.fi) .
> ftp.funet.fi seems to have hardware probles so I was not able
> to upload patch to pub/unix/incoming/elm-2.4ME+/
>
OOPS! That text was left from previous announcement :-(
It is available on ftp.funet.fi.
/ Kari Hurtta