But the estate pipes that I bought looked immaculate when I bought
them, soon became heavily green.
Different materials. In general, plastics (lucite, acrylic, etc) will
not oxidize, while rubbers (vulcanite) will. Of course, even then,
the timeframe will vary based on the specific material and how it was
prepared...
--
Joe - Linux User #449481/Ubuntu User #19733
joe at hits - buffalo dot com
"Hate is baggage, life is too short to go around pissed off all the
time..." - Danny, American History X
Frank
Just my opinion.
Mike
"Nick" <nick.m.c...@gmail.com> wrote in message
news:27238c8e-e5b3-4986...@b15g2000yqd.googlegroups.com...
Jim
On Jul 3, 9:06 am, Jim <j...@mindspring.com> wrote:
> I'm of the same op[inion. I have of couple of dunhills that look
> atrocious. I gave up on them because of this
>
> Jim
>
>
>
> Mike Hagley wrote:
> > Actually I believe that higher quality stems have a higher sulphur
> > content. Savinelli and Charatan are prime examples. Look at inexpensive
> > pipes and you will find that their stems are not oxidized as badly.
>
> > Just my opinion.
>
> > Mike
> > "Nick" <nick.m.c.john...@gmail.com> wrote in message
> >news:27238c8e-e5b3-4986...@b15g2000yqd.googlegroups.com...
> >> It depends on the sulpher content of the vulcanite i think. Cheaper
> >> vulcanite has higher levels of sulpher in it, and will oxidize more
> >> quickly. At least that's been my understanding of it.- Hide quoted text -
>
> - Show quoted text -
But, the better stems also are vulcanised to a greater extent,
hopefully making them more stable.
These are acrylic or lucite, which does not oxidize.
> But the estate pipes that I bought looked immaculate when I bought
> them, soon became heavily green.
Vulcanite oxidizes and changes color with use. Add to this, when
vulcanite is left untouched for long periods of time (months,
maybe years) sulphur in the material that imparts softness
migrates to the surface, but usually does not oxidize
immediately. Allow it a few minutes contact with sliva, though,
and it will oxidize and discolor immediately.
Depending on the severity of oxidation, you may need to buff
using Tripoli compound, or soak the mouthpiece in bleach for a
while (cover logos and lettering with vaseline or something or it
will be dissolved by the bleach), or use fine sandpaper to remove
the oxidized material. Follow-up by buffing with Carnauba wax or
polishing with Briar Pipe Wipe, Renaissance Wax/Halcyon II, or
Johnson's Favor is recommended.
Cheers!
jim b.
--
UNIX is not user unfriendly; it merely
expects users to be computer-friendly.