Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
dmp 734 module
10 views
Skip to first unread message
Dave White
Dec 19, 2009, 9:08:15 PM12/19/09
to
just installed a 734 module on DMP XR500N panel.
door has rim strike with a push bar, rte above the door as well as dr
contact.
the instructions say that you can set zone 3 for REX input that will
activate soft shunt, as well as not energize the unlock relay, i can't
figure out to program the module to not energize the lock relay upon REX
activation.
looked at the programming on the Xr500 panel, but can't find any settings
there either.
door has rim strike with a push bar, rte above the door as well as dr
contact.
the instructions say that you can set zone 3 for REX input that will
activate soft shunt, as well as not energize the unlock relay, i can't
figure out to program the module to not energize the lock relay upon REX
activation.
looked at the programming on the Xr500 panel, but can't find any settings
there either.
Crash Gordon
Dec 19, 2009, 11:59:55 PM12/19/09
to
call tech support they're great...they'll walk you through it.
--
**Crash Gordon**
"Dave White" <renof...@shaw.ca> wrote in message
news:fGfXm.9368$ft1....@newsfe10.iad...
mleuck
Dec 20, 2009, 6:51:02 PM12/20/09
to
On Dec 19, 10:59 pm, "Crash Gordon" <webmas...@siriussystems.invalid>
wrote:
> call tech support they're great...they'll walk you through it.
>
> --
> **Crash Gordon**
wrote:
> call tech support they're great...they'll walk you through it.
>
> --
> **Crash Gordon**
If he's not a DMP dealer good luck
0 new messages