Unfortunately this mirrors my experience as well. Actually, although I don't
consider the advice I got at Home Depot and Lowe's to be great, in comparison
to other places I went it was actually quite decent. For example, I'm not
convinced the folks here at Kelly-Moore ever saw the inside of a paint can.
The first time I went to Sherwin-Williams here nobody seemed to want to help
much at all, then I went back two days later based on more input and linked up
with some exceptionally good help, and the third time I went (to actually
purchase paint), I thought if this guy helped me last time I wouldn't be here
now. Good help is spotty, for sure.
If you have read and everyone is telling you acrylic latex is the way to go
than I think that is what you need to do. Did you ask the Benjamin-Moore
people if their top paint is acrylic at all? Prehaps it is very close to 100%
(say 95%) and therefor is close enough so as it won't make a difference. You
might also ask your painter or even BM to refer you to some other stucko houses
painted with the top-of-the-line BM to see how it ages. If you can't verify
either of these, you probably need to pick another brand. Like I said before,
you'll probably do well with any major brands top of the line acrylic latex.
Good luck!
--
Because the junk mailers of the world think my address is their play thing,
my e-mail address will not be revealed. Please respond publicly.
************Thank you junk mailers for ruining the internet************
Bottom line: Make your selection based on the service and application advice
you get at the store and pay a price you feel comfortible with and I don't
think you can go wrong. Most of the major paint companies have been in
business for at least 100 years and they didn't survive this long by making
crappy paint.
In article <19971001225...@ladder02.news.aol.com>, tgcn...@aol.com
says...
--
The two of them (store owner, Moore rep) + my painter are all there, and try
and persuade me that their Mooreline paint is what I should use, despite its
not being 100% acrylic. On the other hand, they say that maybe I should use
their Mooreguard, their midline paint which is 100% acrylic. I'm tired of
running around to paint stores. I see absolutely no difference in expertise
between the people at paint stores and Home Depot, etc., Guy from
Sherwin-Williams had no idea what 100% acrylic latex paint meant, until I
showed him the print on the can.
I would still like to hear anyone's experience with painting fine stucco. The
more I hear the more I think I should have had another coat of color-coat
applied by a plasterer. Unfortunately, the die has been cast. Any more
suggestions on the best 100% acrylic latex paint for fine stucco.
Seriously, MoorLife is their top flat ext. latex, MoorGuard is a soft
gloss, And MoorGlo is their semi-gloss. They are all top of the line
products. If adhesion is a concern to you, I'd recommend a 1/2 pint. to a
pint of flood's EB to a gallon for the first coat. It will soak into the
stucco and grab it. We don't use EB normally, and have had exellent results
with BM latex on stucco when we do paint it.
In article <19971002170...@ladder02.news.aol.com>,
tgcn...@aol.com (TGCNorton) writes:
Paul Broussard, friend of Bill W
Boston-JL-RF-Sherwood-Pioneer-Excalibur
Broussard Painting Contractors
Pres. Baton Rouge Dart Assoc.