The key point I'd like you to consider is that this bathtub is never,
ever used due to plumbing problems that I can't afford to fix
right now. Eventually, I will have the whole bathroom redone, but
not soon. The most I will ever do with this bathtub is pour a
bucket of water down the drain.
Is there some clever way to improve the appearance of the inside
of the tub - even something you might not normally use to
"refinish" a bathtub (like cement paint or the stuff you put on
basement walls to keep the moisture out)?
Put your thinking caps on and see if you can come up with
something I might try.
Again, this is an unused bathtub. No kids bathing or anything.
Thanks in advance,
--
8^)~~~ Sue (remove the x to e-mail)
~~~~~~
"I reserve the absolute right to be smarter
today than I was yesterday." -Adlai Stevenson
--
Joseph E. Meehan
26 + 6 = 1 It's Irish Math
Sue (remove the x to e-mail)
~~~~~~
In article <GvRdc.2714$T86....@fe2.columbus.rr.com>,
Then I suggest using one of the available products designed for just
that. You should be able to find several choices are various paint and DIY
stores.
S > I have a porcelain bathtub that is as old as my house, which was
S > built in 1962. The bathtub looks awful and I'd like to do something
S > to improve the appearance. Most of the surface on the inside has
S > been worn down to the point of being rough (the shiny surface has
S > been worn off).
Seems like it should have lasted a lot longer than that! This house
was built in 1940-something and the (original) bathtub was just
starting to look worn on the inside bottom surface (the one one stands
one/lays on).
S > The key point I'd like you to consider is that this bathtub is never,
S > ever used due to plumbing problems that I can't afford to fix
S > right now. Eventually, I will have the whole bathroom redone, but
S > not soon. The most I will ever do with this bathtub is pour a
S > bucket of water down the drain.
If this pour-a-bucket-of-water is to keep the drain trap full try
vegetable oil -- won't evaporate.
S > Is there some clever way to improve the appearance of the inside
S > of the tub - even something you might not normally use to
S > "refinish" a bathtub (like cement paint or the stuff you put on
S > basement walls to keep the moisture out)?
As the tub is never used (other than possible water disposal - depends
on bucket of water response) possibly just clean the surface real good
with some sort of a mild acid, rinse thoroughly, let dry, then spray
paint. Mask off the chrome plumbing: drain, overflow/drain lever. As
you never use the tub you won't be subjecting the spray-painted
surface to wear so I'm thinking the spray paint would be satisfactory,
though I would probably use something like Rustoleum or an appliance
paint as would adhere better.
You could even get a bit creative and two-tone your tub: original
colour on the outside, maybe top depending on the condition, new
contrasting colour on the inside.
Another possibility would be to turn the tub into something different
like an aquarium. Cover the bottom with gravel, let the fishies swim
around! Or maybe an overgrown flower pot -- maybe a Bonzai garden.
-
¯ barry.martinşATşthesafebbs.zeppole.com ®
* "My first sexual experience was on a farm," said Tom sheepishly.
---
ş RoseReader 2.52á P003186
ş The Safe BBS ş Bettendorf, IA 563-359-1971
---
ş RIMEGate(tm)/RGXMod V1.13 at BBSWORLD * In...@bbsworld.com