Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Discovery 1 Seat Upgrade

1 view
Skip to first unread message

Martyn Dean

unread,
Mar 6, 2009, 5:22:01 PM3/6/09
to
Has anyone put front and rear seats from a DII into a DI,
Getting grief about rear seats not having proper headrests in my DI
Thanks
Martyn


Dougal

unread,
Mar 6, 2009, 5:49:23 PM3/6/09
to

Change your rear seat passengers!

I've removed my D2 rear seat headrests because they block too much of
the view ... then again I don't carry passengers, either.

The D2 mountings are totally different to the RRC which I suspect is
similar to the D1.

Alex Threlfall

unread,
Mar 6, 2009, 6:19:24 PM3/6/09
to
In article <b9qdnctWs6GXPyzU...@bt.com>, martyn.dean123
@btconnect.com says...
You can swap the front seats I believe by putting the D2 seats on D1
bases, but I don't know about the rear. IIRC the boot on the D2 is
longer, but that may not affect the passenger cabin part.
--
Alex Threlfall
Cyberprog New Media
www.cyberprog.net

Dave Liquorice

unread,
Mar 6, 2009, 7:13:28 PM3/6/09
to
On Fri, 06 Mar 2009 22:49:23 +0000, Dougal wrote:

> I've removed my D2 rear seat headrests because they block too much of
> the view ... then again I don't carry passengers, either.

The passenger ones I don't find a problem but the one that pops up when
you stow the centre arm rest is a great view blocker. I keep the centre
arm rest down...

--
Cheers
Dave.

SteveG

unread,
Mar 8, 2009, 10:47:42 AM3/8/09
to

I'm pretty sure you'll find the DII rear (i.e. middle row if it's a 7
seater) seat is wider than the DI body and so won't fit. The fronts can
probably be made to fit though.

--
Regards

Steve G

0 new messages