Advice please - Servo on Clutch

[Alex]

Friend of mine has trouble with his left knee on occasion and finds
the clutch too heavy on his 300Tdi Range Rover. I remember a
discussion a while back about fitting a remote vacuum servo to the
clutch. Any advice on what is the best servo/cylinder combination to
fit, any pitfalls etc etc. much appreciated

Also, the TDI conversion was done before he got it (was a V8 auto), is
there a difference between the 200 and 300 clutch master cylinders?
Have no idea as to where the manual pedal box came from, was wondering
if the 300tdi has a bigger cylinder to make the clutch easier.

Thanks

Alex

[Dougal]

We were here a couple of weeks ago:
http://tinyurl.com/y97akc9

Does that take you any further?

I'd be surprised if the 200/300 tdi master cylinders (if that is what
has been used) were fundamentally different. They are almost the same
engine.

[Oily]

"Alex" <nospa...@cbmsys.co.uk> wrote in message
news:1icpe55d2a18b2hq9...@4ax.com...

Bigger master cylinder would make it harder. I think they are the same.

[Alex]

On Sat, 31 Oct 2009 22:12:12 +0000, Dougal
<Dou...@Hiskennel.free-online.co.uk> wrote:

>
>We were here a couple of weeks ago:
>http://tinyurl.com/y97akc9
>
>Does that take you any further?
>
>I'd be surprised if the 200/300 tdi master cylinders (if that is what
>has been used) were fundamentally different. They are almost the same
>engine.
>

Thanks Dougal. Now I know what to look for.

Alex