Power from the Vacuum solved what clever bastard am I

[tobby]

Right follow me here, in order to extract power from the vacuum, we must
have a potential in the circuit in order to order up the space power.
Yes there have been various solutions put forward but they have all brought
their own little quirkish problems, :- keeping the potential in the circuit.
Well the solution is use your capacitors and resistor as per suggested
circuits, I/e charge up the circuit, and have a static potential field
generation outside the circuit restoring and renewing potential but not part
of the connected circuit..

[Mr A Clarke]

"tobby" <re...@tiscali.co.uk> wrote in message
news:47d3d82a$1...@mk-nntp-2.news.uk.tiscali.com...

That should work hansomely but we`re not letting out the construction
of the static generator here are we?
In my own notation this is known as a "Single stage excitor" circuit,
like
an electronic axle of the mechanical equivalent Perpetual Motion Machine.
Solid-state too!

[tobby]

"Mr A Clarke" <aclar...@toucansurf.com> wrote in message
news:47d45c8a$1...@mk-nntp-2.news.uk.tiscali.com...

> /////////////////

Has we know the problem is keeping the potential in the circuit until the
vacuum tap is in place.
My idea and it is only that at the moment is to either feed through diodes
+ - but do not hold up too much hope here.
The other is an high rate of spark pulses through spark gap from an
static
generator.
The latter is where I have my money.
>
>