Can I beam to hot sync???
D Rudge
laptop which has a infred port and pilot>?? or do I need to buy
another cradle?? Thanks Dave
Lilleman
Lilleman
D Rudge <dru...@powersurfr.com> skrev i
diskussionsgruppsmeddelandet:3812000a....@news.powersurfr.com...
Lilleman
Lilleman
Lilleman <v...@hem1.passagen.se> skrev i
diskussionsgruppsmeddelandet:_ZnQ3.8848$zc....@nntpserver.swip.net...
Robert Schuetz
WINTEL Box, but in any case you need to install the IR Enhancements (which
are on MacPac CD, also available on Palm site). Works very well.
--
Bob S. (schu...@earthlink.net)
mick...@home.com
www.palm.com. New Hot-sync capablities, including what your looking
for !!!! But make sure you download the correct version and follow the
instructions exactly !!!!!
GOOD LUCK On Sat, 23 Oct 1999 21:27:22 +0200, "Lilleman"
<v...@hem1.passagen.se> wrote:
>You can use Hot sync manager to your laptop.
>
>Lilleman
>
>
>D Rudge <dru...@powersurfr.com> skrev i
>diskussionsgruppsmeddelandet:3812000a....@news.powersurfr.com...
John W. Lee
3.3...it will fail.
Trying to get a solution for that now. You can get IRSync from
www.palmcentral.com.
Good luck,
--
John Lee
le...@outerscape.net
Thomas Almnes
John W. Lee <le...@mail.ilsweb.net> wrote in message
news:38152B8B...@mail.ilsweb.net...
> Use IRSync+ with your PC and Palm V. Don't upgrade to the Palm OS
> 3.3...it will fail.
This is not true!
I upgraded to OS3.3 and use no extra software to hotsync with my computer
(or other Palm, for that matter...).
This is what you do:
Upgrad both hotsync on computer and on handheld
In Prefs on handheld, goto Connection and set it to "IR to a PC/Handheld"
Still in Prefs, goto Serial/IR and set serial via Infrared
In hotsync (on handheld) set sync to happen via "IR to a PC/Handheld"
Thats all. Now, you can hotsync to your laptop. Start by pressing hotsync on
handheld...:)
Works like...eeehhh...knife through hot butter.....what ever! :)
HTH
Thomas
Jim Atkinson
I gave up trying to IR sync with3.0 and didn't try again until I
installed 3.3.
Still can't get it to work-No response at all from the laptop. The V
looks like it is trying but not getting through.
I wonder if my problem could be that I am using a Toshiba Libretto
100ct with Toshiba's pre-installed version of W95 (4.00.950B)?
All the required bits seem to be installed - ie enabled IR port etc but
no joy.
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
PG Dionne
software needed...but no luck. Answer from someone?
Jim Atkinson <jatkins...@tyndale.apana.org.au.invalid> a écrit dans le
message : 000b8d9b...@usw-ex0102-010.remarq.com...
Steve F
I am a newcomer to Palm world of computing.
I believe that the info you need is contained within the readme file on the
CD supplied with the Palm V under the Hotsync section. The components needed
are available from the IBM site and once installed onto windows 95 will
enable the IR port to function. A friend has done this with a Libretto 50ct
and it works !
if you require further info I will endeavour to help
Steve
Jim Atkinson wrote in message
<000b8d9b...@usw-ex0102-010.remarq.com>...
Thomas Almnes
Did you download the lastet IR drivers from Microsoft??
I remember I did, before trying to IR-sync...
thomas
Jim Atkinson <jatkins...@tyndale.apana.org.au.invalid> wrote in message
news:000b8d9b...@usw-ex0102-010.remarq.com...
Jim Atkinson
same onto the Libretto) . I have no other IR "toys" so I really dont
know if the IR port on the Libretto is the problem. However I have an
IR port equiped NEC powermate at work so I will try to Ir hotsync with
that machine and see what happens.
Thanks for the help- I"ll keep trying