Account Options

  1. Sign in
The old Google Groups will be going away soon.
Switch to the new Google Groups.
Google Groups Home
« Groups Home
alt.comp.periphs.mainboard.msi-microstar
+ new post
About this group
Subscribe to this group
This is a Usenet group - learn more
MSI K8T Neo series LAN problem
Options
There are currently too many topics in this group that display first. To make this topic appear first, remove this option from another topic.
There was an error processing your request. Please try again.
flag
   2 messages - Collapse all  -  Translate all to Translated (View all originals)
The group you are posting to is a Usenet group. Messages posted to this group will make your email address visible to anyone on the Internet.
Your reply message has not been sent.
Your post was successful
 
From:
To:
Cc:
Followup To:
Add Cc | Add Followup-to | Edit Subject
Subject:
Validation:
For verification purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
 
Chris Terry  
View profile  
 More options Dec 4 2010, 4:49 am
Newsgroups: alt.comp.periphs.mainboard.msi-microstar
From: Chris Terry <Chris.Terry.4lh...@no.email.invalid>
Date: Sat, 4 Dec 2010 03:49:51 -0600
Local: Sat, Dec 4 2010 4:49 am
Subject: MSI K8T Neo series LAN problem
Print | Individual message | Show original | Report this message | Find messages by this author

-hi,
i have a msi k8t neo series mother board which has 2 maxtor sata
drives. the 160gb is connected to the ser1 which boots xp pro & works
fine but is cluttered, full & needs replacing. the 2nd 120gb is
connected to sata1 and works fine. before i buy & install a new boot
drive i thought i would check that i can install a sata drive/boot/xp
correctly. i have disconnected the old 160gb boot drive. i have loaded
the 120gb sata with xp using the floppy sata driver supplied on floppy.
the system now boots ok on the newly xp loaded drive & i have upgraded
to sp2.-
The problem I have is I cannot connect to my Netgear router. What do I
need to do make the Mother board LAN port active (illuminate the Netgear
port light)? Are there drivers to make the LAN port work? if so where &
how do I load them?


 
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
Paul  
View profile  
 More options Dec 5 2010, 10:37 am
Newsgroups: alt.comp.periphs.mainboard.msi-microstar
From: Paul <nos...@needed.com>
Date: Sun, 05 Dec 2010 10:37:30 -0500
Local: Sun, Dec 5 2010 10:37 am
Subject: Re: MSI K8T Neo series LAN problem
Print | Individual message | Show original | Report this message | Find messages by this author

Did you look on the MSI site for drivers ?

http://www.msi.com/index.php?func=downloadindex

There is probably a LAN driver you need. If you're lucky, maybe
it's small enough to fit on a floppy and carry over to your machine.

Since there is more than one motherboard by that name, it's
better if you locate the file. You need a more exact motherboard
name to do that.

    Paul


 
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
End of messages
« Back to Discussions « Newer topic     Older topic »

Create a group - Google Groups - Google Home - Terms of Service - Privacy Policy
©2012 Google