|
Tech: how can I connect jukebox to an external receiver
|
| |
Hi all, I just picked up a Rowe Berkeley CD 100. Works great, but I am interested in connecting the CD player directly to an external receiver that is connected to my speaker system. can someone explain to me how to do this or where to begin? I assume there might be some way to wire the cd player output, out, to the... more »
|
|
Tech Help: AY100U w/TSU3 Selector - Circuit Operation Question
|
| |
Hi Guys, Been working on my project machine and found resistor R510 not connected in the circuit. It was either cut by accident or the wire just broke. This resistor is installed between the grid 1 [pin 5 of the 2050] and the output (I think) of the 12AX7 pulse amp. I'm fairly good at diagnosing solid state circuits but tubes are new to me. What... more »
|
|
Rockola 48350-1A amp hum
|
| |
I have a Rockola 460 jukebox with a 48350-1a amp. Since I bought this jukebox a few weeks ago, it has always had a hum and here are the symptoms: 1) Hum is present the second the jukebox is turned on 2) The hum does not get louder when the volume is turned up 3) The hum does not go away when the volume connector is unplugged or... more »
|
|
Dielectric Grease
|
| |
I am putting in a stepper on my 222 Seeburg, is is recommended to put Dielectric Grease on the tormat and selector plugs that attach to the stepper, or is this a waste of time. Thanks in advance C.G.
|
|
Rockola 429 question
|
| |
Hi, Im having a problem with a Rockola 429 I just got. When a single selection is made the mech will load a record on turntable(which is spinning) and tone arm lowers to record, then it just stops. When several selections are made the mech operates as it should loading, playing and cancelling. Then when final selection is reached, the same problem occurs. Loads... more »
|
|
NSM City-lV
|
| |
When you turn this juke on, the display fashes on and off, 000 Er 32, it says in the manual, fuse Si 204 and Si 205 are defective, i have checked, they are fine,(voltage passes through), there is +5 V suply to the EPROM, +58 V at terminal #6 from ST 202 of Centrale, to ST 02 of Control and credit unit. There is no response to any of the key... more »
|
|
Selector assembly squeak
|
| |
Hi, I'm restoring my first jukebox, a 1975 Rock-ola 460. I have it all cleaned up and it's sounding much better than when I bought it but I still have a squeaking sound when the write in carriage and read out carriage are rotating. When can I do to get rid of this squeaking sound. Thanks, Rob
|
|
Rock-Ola 494-1
|
| |
I am looking for an S2 Control Unit for this jukebox. Please contact me if anyone can help me out. Thanks. Rich
|
|
packard playmor plastics
|
| |
hi i am looking for any or all of the plastics for a packard ply mor jukebox if you know of any or aftermarket places i need one piece or ill take all of them whatever you have thanks dennis in new hampshire rjuker
|
|
|