Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
rear axle removal on 99 passport - advice needed
0 views
Skip to first unread message
rontech
Jan 28, 2009, 12:47:18 AM1/28/09
to
Looking for some advice on removing my rear axel to repair/replace bearing
and seal. I've got the pinion retaining pin removed but can't seem to get
the clearance needed to slide the pinion shaft out far enough in order to
push the axle in to remove the clip. The pinion shaft hits the side of the
outer gear ring.
and seal. I've got the pinion retaining pin removed but can't seem to get
the clearance needed to slide the pinion shaft out far enough in order to
push the axle in to remove the clip. The pinion shaft hits the side of the
outer gear ring.
Any advice on what I need to do or what I'm doing wrong is much appreciated.
Thanks,
Ron
joe isuzu
Feb 6, 2009, 7:03:17 AM2/6/09
to
0 new messages