Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Attn HyundaiTech ; Why wont the Wheel Speed Sensor come out ?!
1 view
Skip to first unread message
ilbe...@gmail.com
Oct 5, 2009, 1:45:35 PM10/5/09
to
I removed the hold down bolt..but the thing wont budge. Ive tried
whacking it a few times to loosen it along with a screwdriver to dig
it out...but its stuck in its hole. You were right...a Mouse had
eaten thru the wires starting right at the sensor top ...so they cant
be reconnected. SHould i try putting a small pipe wrench on it and
twisting it ? Whats the trick to get it out ? Thanks.
whacking it a few times to loosen it along with a screwdriver to dig
it out...but its stuck in its hole. You were right...a Mouse had
eaten thru the wires starting right at the sensor top ...so they cant
be reconnected. SHould i try putting a small pipe wrench on it and
twisting it ? Whats the trick to get it out ? Thanks.
hyundaitech
Oct 5, 2009, 10:52:36 PM10/5/09
to
The last couple of these I've removed I've had to break apart. I
think the last one was on a '99-'05 Sonata, and if my memory is
correct, I unbolted the ball joint and hammered it out from the back
side using an extension. On the Santa Fe, it may be easier to take
the strut and tie rod end loose from the knuckle.
ilbe...@gmail.com
Oct 6, 2009, 10:32:35 AM10/6/09
to
Thanks.
0 new messages