Hello AHAers, I'm trying to finish up a LED-lit acrylic sword for this coming weekend, and I'd like to use the laser cutter to make the handle pieces. Unfortunately, I missed the most recent laser cutter learning session (didn't know it was going on until a few hours after it finished, argh) so I need some help to get it done. Would anyone be able to be there at some point Monday or Tuesday (or, if need be, Wednesday, but I'm hoping to get it done a bit before that) to help me out with that? I'd really appreciate it! There also will probably be wiring of the LEDs going on after the acrylic's assembled, but that can probably happen at another time.
If you want, I can run the class for you tonight from 6:30 to 7:30ish. It's
$15 for non-members and $10 for members. If anyone else is interested in
it, let me know. I'm happy to run it for a bigger class.
Class includes instruction on how to use it safely and one hour of time for
use after the class.
Time after that is requested donation of $10 per hour for members and $12
per hour for non members.
I can't really hang around much later than that though to help you out.
On Mon, Oct 29, 2012 at 1:07 AM, Landon Smith <lcsmith...@gmail.com> wrote:
> Hello AHAers,
> I'm trying to finish up a LED-lit acrylic sword for this coming weekend,
> and I'd like to use the laser cutter to make the handle pieces.
> Unfortunately, I missed the most recent laser cutter learning session
> (didn't know it was going on until a few hours after it finished, argh) so
> I need some help to get it done. Would anyone be able to be there at some
> point Monday or Tuesday (or, if need be, Wednesday, but I'm hoping to get
> it done a bit before that) to help me out with that? I'd really appreciate
> it!
> There also will probably be wiring of the LEDs going on after the
> acrylic's assembled, but that can probably happen at another time.
I'm not quite sure, actually... I'm working on a group project that's
due tonight for a class, and it seems like it may run longer than
expected. Is there some point on Tuesday that would work for you? If
not I might be able to get out of the group for the time it'd take to
do the laser cutter stuff at 6:30.
On Mon, Oct 29, 2012 at 11:50 AM, Tyler Worman <tswor...@novaslp.net> wrote:
> If you want, I can run the class for you tonight from 6:30 to 7:30ish. It's
> $15 for non-members and $10 for members. If anyone else is interested in it,
> let me know. I'm happy to run it for a bigger class.
> Class includes instruction on how to use it safely and one hour of time for
> use after the class.
> Time after that is requested donation of $10 per hour for members and $12
> per hour for non members.
> I can't really hang around much later than that though to help you out.
> Let me know if that would work for you.
> - Tyler
> On Mon, Oct 29, 2012 at 1:07 AM, Landon Smith <lcsmith...@gmail.com> wrote:
>> Hello AHAers,
>> I'm trying to finish up a LED-lit acrylic sword for this coming weekend,
>> and I'd like to use the laser cutter to make the handle pieces.
>> Unfortunately, I missed the most recent laser cutter learning session
>> (didn't know it was going on until a few hours after it finished, argh) so I
>> need some help to get it done. Would anyone be able to be there at some
>> point Monday or Tuesday (or, if need be, Wednesday, but I'm hoping to get it
>> done a bit before that) to help me out with that? I'd really appreciate it!
>> There also will probably be wiring of the LEDs going on after the
>> acrylic's assembled, but that can probably happen at another time.
On Mon, Oct 29, 2012 at 2:06 PM, Landon Smith <lcsmith...@gmail.com> wrote:
> I'm not quite sure, actually... I'm working on a group project that's
> due tonight for a class, and it seems like it may run longer than
> expected. Is there some point on Tuesday that would work for you? If
> not I might be able to get out of the group for the time it'd take to
> do the laser cutter stuff at 6:30.
> On Mon, Oct 29, 2012 at 11:50 AM, Tyler Worman <tswor...@novaslp.net>
> wrote:
> > If you want, I can run the class for you tonight from 6:30 to 7:30ish.
> It's
> > $15 for non-members and $10 for members. If anyone else is interested in
> it,
> > let me know. I'm happy to run it for a bigger class.
> > Class includes instruction on how to use it safely and one hour of time
> for
> > use after the class.
> > Time after that is requested donation of $10 per hour for members and $12
> > per hour for non members.
> > I can't really hang around much later than that though to help you out.
> > Let me know if that would work for you.
> > - Tyler
> > On Mon, Oct 29, 2012 at 1:07 AM, Landon Smith <lcsmith...@gmail.com>
> wrote:
> >> Hello AHAers,
> >> I'm trying to finish up a LED-lit acrylic sword for this coming weekend,
> >> and I'd like to use the laser cutter to make the handle pieces.
> >> Unfortunately, I missed the most recent laser cutter learning session
> >> (didn't know it was going on until a few hours after it finished, argh)
> so I
> >> need some help to get it done. Would anyone be able to be there at some
> >> point Monday or Tuesday (or, if need be, Wednesday, but I'm hoping to
> get it
> >> done a bit before that) to help me out with that? I'd really appreciate
> it!
> >> There also will probably be wiring of the LEDs going on after the
> >> acrylic's assembled, but that can probably happen at another time.
On Mon, Oct 29, 2012 at 2:57 PM, Tyler Worman <tswor...@novaslp.net> wrote:
> Unfortunately not. I'll be down on Thursday. Otherwise I'm busy the rest of
> this week.
> If tonight doesn't work, I'm sure you can find someone down there that knows
> how to use it and can help you.
> On Mon, Oct 29, 2012 at 2:06 PM, Landon Smith <lcsmith...@gmail.com> wrote:
>> I'm not quite sure, actually... I'm working on a group project that's
>> due tonight for a class, and it seems like it may run longer than
>> expected. Is there some point on Tuesday that would work for you? If
>> not I might be able to get out of the group for the time it'd take to
>> do the laser cutter stuff at 6:30.
>> On Mon, Oct 29, 2012 at 11:50 AM, Tyler Worman <tswor...@novaslp.net>
>> wrote:
>> > If you want, I can run the class for you tonight from 6:30 to 7:30ish.
>> > It's
>> > $15 for non-members and $10 for members. If anyone else is interested in
>> > it,
>> > let me know. I'm happy to run it for a bigger class.
>> > Class includes instruction on how to use it safely and one hour of time
>> > for
>> > use after the class.
>> > Time after that is requested donation of $10 per hour for members and
>> > $12
>> > per hour for non members.
>> > I can't really hang around much later than that though to help you out.
>> > Let me know if that would work for you.
>> > - Tyler
>> > On Mon, Oct 29, 2012 at 1:07 AM, Landon Smith <lcsmith...@gmail.com>
>> > wrote:
>> >> Hello AHAers,
>> >> I'm trying to finish up a LED-lit acrylic sword for this coming
>> >> weekend,
>> >> and I'd like to use the laser cutter to make the handle pieces.
>> >> Unfortunately, I missed the most recent laser cutter learning session
>> >> (didn't know it was going on until a few hours after it finished, argh)
>> >> so I
>> >> need some help to get it done. Would anyone be able to be there at some
>> >> point Monday or Tuesday (or, if need be, Wednesday, but I'm hoping to
>> >> get it
>> >> done a bit before that) to help me out with that? I'd really appreciate
>> >> it!
>> >> There also will probably be wiring of the LEDs going on after the
>> >> acrylic's assembled, but that can probably happen at another time.
On Mon, Oct 29, 2012 at 3:32 PM, Landon Smith <lcsmith...@gmail.com> wrote:
> Alright, I should be able to make it down today, then.
> -Landon
> On Mon, Oct 29, 2012 at 2:57 PM, Tyler Worman <tswor...@novaslp.net>
> wrote:
> > Unfortunately not. I'll be down on Thursday. Otherwise I'm busy the rest
> of
> > this week.
> > If tonight doesn't work, I'm sure you can find someone down there that
> knows
> > how to use it and can help you.
> > On Mon, Oct 29, 2012 at 2:06 PM, Landon Smith <lcsmith...@gmail.com>
> wrote:
> >> I'm not quite sure, actually... I'm working on a group project that's
> >> due tonight for a class, and it seems like it may run longer than
> >> expected. Is there some point on Tuesday that would work for you? If
> >> not I might be able to get out of the group for the time it'd take to
> >> do the laser cutter stuff at 6:30.
> >> On Mon, Oct 29, 2012 at 11:50 AM, Tyler Worman <tswor...@novaslp.net>
> >> wrote:
> >> > If you want, I can run the class for you tonight from 6:30 to 7:30ish.
> >> > It's
> >> > $15 for non-members and $10 for members. If anyone else is interested
> in
> >> > it,
> >> > let me know. I'm happy to run it for a bigger class.
> >> > Class includes instruction on how to use it safely and one hour of
> time
> >> > for
> >> > use after the class.
> >> > Time after that is requested donation of $10 per hour for members and
> >> > $12
> >> > per hour for non members.
> >> > I can't really hang around much later than that though to help you
> out.
> >> > Let me know if that would work for you.
> >> > - Tyler
> >> > On Mon, Oct 29, 2012 at 1:07 AM, Landon Smith <lcsmith...@gmail.com>
> >> > wrote:
> >> >> Hello AHAers,
> >> >> I'm trying to finish up a LED-lit acrylic sword for this coming
> >> >> weekend,
> >> >> and I'd like to use the laser cutter to make the handle pieces.
> >> >> Unfortunately, I missed the most recent laser cutter learning session
> >> >> (didn't know it was going on until a few hours after it finished,
> argh)
> >> >> so I
> >> >> need some help to get it done. Would anyone be able to be there at
> some
> >> >> point Monday or Tuesday (or, if need be, Wednesday, but I'm hoping to
> >> >> get it
> >> >> done a bit before that) to help me out with that? I'd really
> appreciate
> >> >> it!
> >> >> There also will probably be wiring of the LEDs going on after the
> >> >> acrylic's assembled, but that can probably happen at another time.
