New pictures of DIY kit uploaded (MSN)
Richard Papa
From: MXfury1 (Original Message) Sent: 20/08/2005 13:21
It seems like it took forever to receive my Kit and have the wheels laced up
from a local bike shop but it is finally done.
The only problem I ran into is that I have a 700c size wheel and the forks
have to be 3 1/2 inches apart for at least 6 inch up from the axle.They
don't make a fork that wide for a 700c wheel.So I had to get a fork from a
mountain bike 26" and have my local weld shop add about 1 1/2 to the
length.Also this bike has a 24 speed and the space for the motor will only
fit a 21 speed. Other than that it went together pretty easy
----------------------------------------------------------------------------
Message 2 of 5 in Discussion
From: ebikedude Sent: 23/08/2005 21:36
Man, nice job, that looks sweet! Do you know if this setup is much lighter
than the M750/M750X?
Mike
---------------------------------------------------------------------------
Message 3 of 5 in Discussion
From: MXfury1 Sent: 24/08/2005 14:04
Thanks, I think it weights pretty close to the M750.
Steve D
----------------------------------------------------------------------------
Message 4 of 5 in Discussion
From: PapaPro1 Sent: 25/08/2005 11:48
Nice DIY! I like the chain guard!!! I want one. What's on the bottle holder?
Cheers,
Richard Papa
----------------------------------------------------------------------------
Message 5 of 5 in Discussion
From: MXfury1 Sent: 25/08/2005 14:48
Thanks Papapro1,
The red and black device strapped below the seat is a cable lock alarm.
Thanks Steve
http://www.aerostich.com/product.php?productid=17050&cat=0&page=7