උදව්වක්: ප්ලාස්ටික් මත නිකල් ආලේපනය
12 views
Skip to first unread message
Dhammike Mendis
Jul 2, 2008, 7:21:10 AM7/2/08
to sinhala...@googlegroups.com, sinhala-...@googlegroups.com
මෙය යුනිකෝඩ් හා සම්බන්ධ නොවේ.
මාගේ මිතුරෙකුට ප්ලාස්ටික් මත නිකල් ආලේපනයක් කරන්නේ කෙසේද යන්න දැන ගැනීමට අවශ්ය වී ඇත. විද්යාත්මකව මෙම පරීක්ෂණය කල හැක්කේ කෙසේද යන වග දන්නා කෙනෙක් ඇත්නම් උපදෙස් දෙන්න.
ස්තුතියි
ධම්මික මෙන්ඩිස්෴
මාගේ මිතුරෙකුට ප්ලාස්ටික් මත නිකල් ආලේපනයක් කරන්නේ කෙසේද යන්න දැන ගැනීමට අවශ්ය වී ඇත. විද්යාත්මකව මෙම පරීක්ෂණය කල හැක්කේ කෙසේද යන වග දන්නා කෙනෙක් ඇත්නම් උපදෙස් දෙන්න.
ස්තුතියි
ධම්මික මෙන්ඩිස්෴
Kelum Jayasinghe
Jul 2, 2008, 7:58:24 AM7/2/08
to Sinhala...@googlegroups.com
Machan I have information, but its an industrial secret, information is not for free
--
~~~~~~~~~~~~~~~~~~~// Expect More ! ~~~~~~~~~~~~~~~~~~//
2008/7/2 Dhammike Mendis <dhammik...@gmail.com>:
--
~~~~~~~~~~~~~~~~~~~// Expect More ! ~~~~~~~~~~~~~~~~~~//
Lahiru මල්ලි
Jul 2, 2008, 10:35:28 AM7/2/08
to Sinhala...@googlegroups.com
I'v seen Chrome spray cans available in some leading hardware accessories shops but have no idea how productive those are.
Lahiru
Lahiru
හිරන්ය ශ්රිමාල්
Jul 2, 2008, 1:23:26 PM7/2/08
to Sinhala...@googlegroups.com
ප්ලාස්ටික් මත ලෝහ ආලේප කිරීමේදී ප්ලාස්ටික් මත මුලින් කාබන් ස්ථරයක් ආලේප ඒ මත විද්යුත් ලෝහ ආලේපනයෙන් නිකල් ආලේප කලයුතු බව රසායන විද්යා පන්තියකදී කියපු බව මතකයි.
--
http://sinhalalyricx.blogspot.com/
2008/7/2 Dhammike Mendis <dhammik...@gmail.com>:
--
http://sinhalalyricx.blogspot.com/
Kelum Jayasinghe
Jul 2, 2008, 10:58:23 AM7/2/08
to Sinhala...@googlegroups.com
This technique is called electroplating and its complex.
Pubudu Goonetilleke
Jul 2, 2008, 11:34:39 PM7/2/08
to Sinhala...@googlegroups.com
Sorry for typing in English. Current mechine does not have unicode installed.
Electroplating is the best option and generally metal coating is done on conducting surface. Electroplating is very simple and u can make the tools at home. But as mentioned, plastic surface should be made conducting by coating carbon or similar material. Look at wiki for electroplating : http://en.wikipedia.org/wiki/Electroplating
--
Pubudu Goonetilleke.
PhD Candidate,
Clarkson University - USA.
Office : 315 268 7621
Home : 315 265 2756
Electroplating is the best option and generally metal coating is done on conducting surface. Electroplating is very simple and u can make the tools at home. But as mentioned, plastic surface should be made conducting by coating carbon or similar material. Look at wiki for electroplating : http://en.wikipedia.org/wiki/Electroplating
2008/7/2 Dhammike Mendis <dhammik...@gmail.com>:
--
Pubudu Goonetilleke.
PhD Candidate,
Clarkson University - USA.
Office : 315 268 7621
Home : 315 265 2756
(විශ්ව කුමාර)
Jul 13, 2008, 1:17:18 PM7/13/08
to සිංහල යුනිකෝඩ් සමූහය - Sinhala Unicode Group
Chrome spray වීදුරු මත ආලේප කල හැකිද?
On Jul 3, 9:34 am, "Pubudu Goonetilleke" <pubud...@gmail.com> wrote:
> Sorry for typing in English. Current mechine does not have unicode
> installed.
> Electroplating is the best option and generally metal coating is done on
> conducting surface. Electroplating is very simple and u can make the tools
> at home. But as mentioned, plastic surface should be made conducting by
> coating carbon or similar material. Look at wiki for electroplating :http://en.wikipedia.org/wiki/Electroplating
>
> 2008/7/2 Dhammike Mendis <dhammike.men...@gmail.com>:
On Jul 3, 9:34 am, "Pubudu Goonetilleke" <pubud...@gmail.com> wrote:
> Sorry for typing in English. Current mechine does not have unicode
> installed.
> Electroplating is the best option and generally metal coating is done on
> conducting surface. Electroplating is very simple and u can make the tools
> at home. But as mentioned, plastic surface should be made conducting by
> coating carbon or similar material. Look at wiki for electroplating :http://en.wikipedia.org/wiki/Electroplating
>
Reply all
Reply to author
Forward
0 new messages