Can not "Unspecify" path after having set it...

[Jontu Kontar]

At some point, I had to specify a path when mounting an SSHFS file
system. For some reason, the new MacFusion client will not load the
default path (whatever loads when the path is empty). If I supply it
with a correct path, it loads normally.

From what I can see in the log, it seems to connect and authenticate
correctly but then it stops.

----

8/15/08 4:23:27 PM MacfusionMenuling[188] Note parameters changed for
fs <MFClientFS: 0x102a840> (Rydell - WLO - External)
8/15/08 4:23:27 PM Macfusion[3710] Note parameters changed for fs
<MFClientFS: 0x1075340> (Rydell - WLO - External)
8/15/08 4:23:28 PM macfusionAgent[136] Mounting
8/15/08 4:23:28 PM MacfusionMenuling[188] Note status changed for fs
<MFClientFS: 0x102a840> (Rydell - WLO - External) to Waiting to Mount
8/15/08 4:23:28 PM Macfusion[3710] Note status changed for fs
<MFClientFS: 0x1075340> (Rydell - WLO - External) to Waiting to Mount
8/15/08 4:23:28 PM macfusionAgent[136] Task launched OK
8/15/08 4:23:29 PM macfusionAgent[136] debug1: Reading configuration
data /Users/pauladams/.ssh/config
debug1: Reading configuration data /etc/ssh_config
8/15/08 4:23:29 PM macfusionAgent[136] debug1: Connecting to
rydell.wlo.thewyld.com [12.226.224.4] port 4500.
8/15/08 4:23:29 PM macfusionAgent[136] debug1: Connection
established.
8/15/08 4:23:29 PM macfusionAgent[136] debug1: identity file /Users/
pauladams/.ssh/id_rsa type 1
debug1: identity file /Users/pauladams/.ssh/id_dsa type 2
debug1: identity file /Users/pauladams/.ssh/rydell type 1
debug1: Remote protocol version 2.0, remote software version
OpenSSH_3.9p1
debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2_MSG_KEXINIT sent
8/15/08 4:23:30 PM macfusionAgent[136] debug1: SSH2_MSG_KEXINIT
received
debug1: kex: server->client aes128-cbc hmac-md5 zlib
debug1: kex: client->server aes128-cbc hmac-md5 zlib
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
8/15/08 4:23:30 PM macfusionAgent[136] debug1:
SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
8/15/08 4:23:30 PM macfusionAgent[136] debug1: Host
'[rydell.wlo.thewyld.com]:4500' is known and matches the RSA host key.
debug1: Found key in /Users/pauladams/.ssh/known_hosts:19
8/15/08 4:23:30 PM macfusionAgent[136] debug1: ssh_rsa_verify:
signature correct
debug1: Enabling compression at level 6.
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
8/15/08 4:23:30 PM macfusionAgent[136] debug1: SSH2_MSG_SERVICE_ACCEPT
received
8/15/08 4:23:30 PM macfusionAgent[136] debug1: Authentications that
can continue: publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /Users/pauladams/.ssh/id_dsa
debug1: Authentications that can continue: publickey
debug1: Offering public key: /Users/pauladams/.ssh/id_rsa
8/15/08 4:23:30 PM macfusionAgent[136] debug1: Authentications that
can continue: publickey
debug1: Offering public key: /Users/pauladams/.ssh/rydell
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug1: read PEM private key done: type RSA
8/15/08 4:23:30 PM macfusionAgent[136] debug1: Authentication
succeeded (publickey).
debug1: channel 0: new [client-session]
8/15/08 4:23:30 PM MacfusionMenuling[188] Note status changed for fs
<MFClientFS: 0x102a840> (Rydell - WLO - External) to Failed to Mount
8/15/08 4:23:30 PM Macfusion[3710] Note status changed for fs
<MFClientFS: 0x1075340> (Rydell - WLO - External) to Failed to Mount

[Jontu Kontar]

I just realized that there was a new version (2.0.3) of MacFusion but
that doesn't solve my current issue. MacFusion seems to believe that
I do not have read access to my own files... It still copies them
over to the remote volume but prompts me each time I do a file copy.