Crestliner Dane

I see no posts here since 2006. Is this group dead? Did discussion somewhere else? Thanks.

I finished up laying in the foam into those two back cells as well as along the sides of the boat and

Here is a list of some images I took this morning of the boat and construction project. There are

Tore the old seats apart yesturday. Looks like I can use the old foam, so that helps the budget alot.

Phase 1 (remaining): (X) Clean inside of boat (X) Disconnect motor controls (X) Disconnect all wiring

Phase 1 (remaining): (_) Clean inside of boat (_) Disconnect motor controls (_) Disconnect all wiring

Sunday Progress Report Part B. I pushed the boat out of the garage for some sun hoping I can cause

I should also note I found the manufacture plate for the boat and now have the serial number, not

It was asked how hard it was to remove the floor boards. The most difficult part of removing the

http://i18.photobucket.com/albums/b147/airportphantom/Boat/MVC-206F.jpg http://i18.photobucket.com/

My family has had the Crestliner Dane since 1969 with a Starflite 90-s motor and up until 1991 it was

The Crestliner Dane was an aluminum hull boat manufactures by Crestliner for a few years ending in

Welcome to the Crestliner Dane Google Group. The intent of this group is to give update information