Sieg C0 Baby Lathe

Contact the owners and managers

1–30 of 52

Support Group for the Sieg C0 'Baby Lathe'

This group has been dormant since Google discontinued Group Pages, which held the bulk of its Content.

The Discussions remain in case they are of any help.

0 selected

John Smith, … MMT Moderator4

29/08/2021

Seig C0 Adjustable Tailstock, 4 Jaw Chuck , QCTP, HSS v Insert tooling, etc

John, The most crucial accessories for me have been: - I reckon a four-jaw independent-jaw chuck is a

unread,

Seig C0 Adjustable Tailstock, 4 Jaw Chuck , QCTP, HSS v Insert tooling, etc

John, The most crucial accessories for me have been: - I reckon a four-jaw independent-jaw chuck is a

29/08/2021

John Smith, … David Halfpenny4

28/08/2021

Sieg C0 ZYT-150 Motor ?

Thank you John for sharing that very useful reference with us :-) David admin On 28 Aug 2021, at 07:

unread,

Sieg C0 ZYT-150 Motor ?

Thank you John for sharing that very useful reference with us :-) David admin On 28 Aug 2021, at 07:

28/08/2021

David 1/2d, … Terence Carrington16

21/10/2012

Adjustable Tailstock

From: rnthomp Sent: Sunday, October 21, 2012 4:40 PM To: C0-L...@googlegroups.com Subject: [C0 Lathe

unread,

Adjustable Tailstock

From: rnthomp Sent: Sunday, October 21, 2012 4:40 PM To: C0-L...@googlegroups.com Subject: [C0 Lathe

21/10/2012

stantheman103

24/07/2012

Re: autofeed adapter C0 lathe

I can't say that I have had any problems with mine (although it was bought a few years ago now).

unread,

Re: autofeed adapter C0 lathe

I can't say that I have had any problems with mine (although it was bought a few years ago now).

24/07/2012

Kludge

19/06/2012

Sieg Nano?

What caught my attention from Sieg is their new Nano lathe, mill & drill. They're small - the

unread,

Sieg Nano?

What caught my attention from Sieg is their new Nano lathe, mill & drill. They're small - the

19/06/2012

ron...@internode.on.net, … Ketan Swali5

17/06/2012

Intro

Thanks for the info, Ketan. Ron -------Original Message------- From: Ketan Swali Date: 06/17/12 21:23

unread,

Intro

Thanks for the info, Ketan. Ron -------Original Message------- From: Ketan Swali Date: 06/17/12 21:23

17/06/2012

J B

28/09/2010

C0 FS?

Anyone have a C0 for sale in the states, for a reasonable price? Thanks John

unread,

C0 FS?

Anyone have a C0 for sale in the states, for a reasonable price? Thanks John

28/09/2010

André, … Ken M5

23/07/2010

Converting Sieg C0 to KC0-MACH

I've done it or rather had it done by a local machine shop. It uses nema 17 motors and runs like

unread,

Converting Sieg C0 to KC0-MACH

I've done it or rather had it done by a local machine shop. It uses nema 17 motors and runs like

23/07/2010

David 1/2d2

23/07/2010

Jon Allitt's CNC C0

In response to Andre's question, I've updated the page on Jon's CNC C0. David Click on

unread,

Jon Allitt's CNC C0

In response to Andre's question, I've updated the page on Jon's CNC C0. David Click on

23/07/2010

David Halfpenny gmail

01/07/2010

Fw: Motor faults and motor refurbishment

Here's a thought from a member of another group. Somebody had asked about replacement brushes for

unread,

Fw: Motor faults and motor refurbishment

Here's a thought from a member of another group. Somebody had asked about replacement brushes for

01/07/2010

Jensmith, … David Halfpenny gmail3

17/06/2010

Chucks

I've got a C0 and I've got one of those chucks. Gotta go now so I'll get back to you

unread,

Chucks

I've got a C0 and I've got one of those chucks. Gotta go now so I'll get back to you

17/06/2010

Jensmith, … nick clarke5

20/05/2010

[C0 Lathe] Can you remove the cross slide?

Thanks very much Nick. On 20 May 2010 13:57, nick clarke <nickcl...@hotmail.co.uk> wrote:

unread,

[C0 Lathe] Can you remove the cross slide?

Thanks very much Nick. On 20 May 2010 13:57, nick clarke <nickcl...@hotmail.co.uk> wrote:

20/05/2010

David Halfpenny gmail, christia...@ntlworld.com4

13/05/2010

Fw: [C0 Lathe] will it do the job? CO Lathe

Hi David cheers for the reply what i need it to do is drill a hole stright through the middle of a

unread,

Fw: [C0 Lathe] will it do the job? CO Lathe

Hi David cheers for the reply what i need it to do is drill a hole stright through the middle of a

13/05/2010

christia...@ntlworld.com2

13/05/2010

[C0 Lathe] will it do the job? CO Lathe

hi all new to this group name is chris by the way right down to the nitty gritty stuff looking at

unread,

[C0 Lathe] will it do the job? CO Lathe

hi all new to this group name is chris by the way right down to the nitty gritty stuff looking at

13/05/2010

David Halfpenny gmail

11/05/2010

Fw: [C0 Lathe] Fitting the drive center

-------------------------------------------------- From: "Jensmith" <jensmith25@

unread,

Fw: [C0 Lathe] Fitting the drive center

-------------------------------------------------- From: "Jensmith" <jensmith25@

11/05/2010

Jensmith

11/05/2010

[C0 Lathe] Fitting the drive center

Hi, I'm back again :) Pen turning stuff is sorted so thanks for the help. I've got a drive

unread,

[C0 Lathe] Fitting the drive center

Hi, I'm back again :) Pen turning stuff is sorted so thanks for the help. I've got a drive

11/05/2010

Jensmith25, … David Halfpenny gmail9

11/05/2010

[C0 Lathe] C0 Lathe and pen turning?

-------------------------------------------------- From: "Jennifer Smith" <jensmith25@

unread,

[C0 Lathe] C0 Lathe and pen turning?

-------------------------------------------------- From: "Jennifer Smith" <jensmith25@

11/05/2010

David 1/2d

21/03/2010

View this page "Gallery of Baby Lathe work"

I've added another item to the Gallery at: http://groups.google.com/group/C0-Lathe/web/gallery-of

unread,

View this page "Gallery of Baby Lathe work"

I've added another item to the Gallery at: http://groups.google.com/group/C0-Lathe/web/gallery-of

21/03/2010

nick clarke

07/01/2010

more photos

Use Hotmail to send and receive mail from your different email accounts. Find out how.

unread,

more photos

Use Hotmail to send and receive mail from your different email accounts. Find out how.

07/01/2010

nick clarke

07/01/2010

Stuart oscillator photos

Heres some pictures to go with my new post, I could not work out how to do it via the forum pages Use

unread,

Stuart oscillator photos

Heres some pictures to go with my new post, I could not work out how to do it via the forum pages Use

07/01/2010

nikko

07/01/2010

Stuart Oscilator, Episode 1

Hi there, Heres the first installment of my Stuart oscillator build. I decided to attack the cylinder

unread,

Stuart Oscilator, Episode 1

Hi there, Heres the first installment of my Stuart oscillator build. I decided to attack the cylinder

07/01/2010

nick clarke

19/12/2009

Hi Folks, Managed to get the loan of a camera, so heres a few photos of what I got in the bundle from

unread,

Hi Folks, Managed to get the loan of a camera, so heres a few photos of what I got in the bundle from

19/12/2009

nikko, … Terence Carrington16

11/12/2009

My New CO Lathe

Thanks Terry. I have seen that one, The peatol one may be a little larger, I'm also a bit lazy!

unread,

My New CO Lathe

Thanks Terry. I have seen that one, The peatol one may be a little larger, I'm also a bit lazy!

11/12/2009

Middyeasy

26/10/2009

CNC conversion of the c0 Lathe

Ive posted some pixs over on the yahoo group site of my cnc conversion. Ive got it running and now

unread,

CNC conversion of the c0 Lathe

Ive posted some pixs over on the yahoo group site of my cnc conversion. Ive got it running and now

26/10/2009

Danum

08/10/2009

Auto Feed Attachement Problems

Has anyone else had and issues or problems with the Auto Feed Attachement? I have stripped down my

unread,

Auto Feed Attachement Problems

Has anyone else had and issues or problems with the Auto Feed Attachement? I have stripped down my

08/10/2009

George Haddad

05/10/2009

Latest C-0 project developments

David, Here are my latest attempts to mark out a hole circle on the brass hole guages that I prepared

unread,

Latest C-0 project developments

David, Here are my latest attempts to mark out a hole circle on the brass hole guages that I prepared

05/10/2009

Urneseses, SERCEFLYER5

02/10/2009