Allmand Google Group

RE: [Allmand] Need Prop Specs

sh...@bellsouth.net (Sam A. Scudder) — Wed, 07 May 2008 21:31:40 UT

Search Campbell Sailor Prop and call Norm at the manufacturer. Have your
engine model, transmission ratio, and boat model ready and he will hook you
up for about $450. For the 35, I think they are about 15x9 for the Yanmar
3gmf30
Sam
-----Original Message-----
Of Keith in Charleston
Sent: Wednesday, May 07, 2008 5:09 PM

Need Prop Specs

ganne...@gmail.com (Keith in Charleston) — Wed, 07 May 2008 21:08:38 UT

I need a source on prop specs and a prop source as well. Thanks for
any info you may have.

Keith Gannett

Re: Whale manual pump diaphram

comhe...@yahoo.com (Ander) — Wed, 30 Apr 2008 02:00:19 UT

Pulled the manual bilge pump.

The model is "Urchin Pump - Thru Deck Mount
"

Manufacturer BP9013. Westmarine number 168575

Re: [Allmand] Climbing the Mast - Solo

donkmil...@aol.com — Tue, 29 Apr 2008 17:45:32 UT

I bought a mast master --$450 or so--i'm 66 & just got tired of the bosum's
chair--solo is a bit**---

In a message dated 4/29/2008 11:43:56 A.M. Eastern Daylight Time,
Any recommendations on tools/methods to climb the Mast Solo.
**************Need a new ride? Check out the largest site for U.S. used car

Climbing the Mast - Solo

comhe...@yahoo.com (Ander) — Tue, 29 Apr 2008 15:43:49 UT

Any recommendations on tools/methods to climb the Mast Solo.

Re: [Allmand] A neat Google Map for our friends on the Allmand Group

wish...@cox.net (wishing) — Mon, 28 Apr 2008 22:41:30 UT

Thanks, Ed! It is very interesting! Good to hear from you, too!
Fair winds,
wishing
----- Original Message -----
From: Ed Kelly
To: Allmand@googlegroups.com
Sent: Friday, April 25, 2008 12:38 PM
Subject: [Allmand] A neat Google Map for our friends on the Allmand Group
Hi everyone,

RE: [Allmand] Re: View this page "Owners"

sailor...@gmail.com (Lee) — Mon, 28 Apr 2008 22:32:43 UT

I update the page here, but once I get all the changes I will send it to
Hank on the Allmand Sail site.

-Lee

Of Robert Feeney
Sent: Monday, April 28, 2008 5:58 PM
To: Allmand@googlegroups.com

Thank you for whatever you can do. Is there something, in addition, that I
should do? BF
Hi Robert,

Re: [Allmand] Re: View this page "Owners"

bobfeene...@gmail.com (Robert Feeney) — Mon, 28 Apr 2008 21:58:29 UT

Thank you for whatever you can do. Is there something, in addition, that I
should do? BF

Re: [Allmand] Re: Sailing performance questions

donkmil...@aol.com — Mon, 28 Apr 2008 19:56:14 UT

Hopefully -I'll never have to find out--infact -emphatically---I will never
have 1st hand knowlwdge

In a message dated 4/28/2008 2:59:42 P.M. Eastern Daylight Time,
Ander,
I find it hard to visualize sailing in ten to fourteen foot waves and having
a dry deck.
Wow fifty knot winds and still a dry deck.

Re: [Allmand] Re: Sailing performance questions

donkmil...@aol.com — Mon, 28 Apr 2008 19:50:38 UT

Hopefully -I'll never have to find out--infact -emphatically---I will never
have 1st hand knowlwdge

Re: [Allmand] Re: Sailing performance questions

eddieca...@aol.com — Mon, 28 Apr 2008 18:59:27 UT

Ander,
I find it hard to visualize sailing in ten to fourteen foot waves and having
a dry deck.
Wow fifty knot winds and still a dry deck.
How do you manage that?
Ed and Louise "Allmand Joy"
**************Need a new ride? Check out the largest site for U.S. used car
listings at AOL Autos.

Re: Cutlass Bearing

nrthc...@velocity.net (Charlie) — Mon, 28 Apr 2008 04:04:40 UT

Brian - Bill ended up doing it the esiest way,usually. When you get
ready to put the new one in, put it in the freeser for a cople of
days. Then oil it up and it ought to slip into the base slicker'n snot
on a door knob. Before you set it let it thaw out and expand.

Charlie
Aurora 1980 A31

Forward and aft gates for 31

nrthc...@velocity.net (Charlie) — Mon, 28 Apr 2008 03:56:28 UT

Uncovered today and found that both port side gates were broken off at
their bases, likely end of January storm and blown out shrink wrap
that became loose.

If anyone knows of or has any idea where I might find 2 gates, that's
the stanchion and the support leg, for a 31 please email with a name

RE: [Allmand] Re: View this page "Owners"

sailor...@gmail.com (Lee) — Mon, 28 Apr 2008 00:58:17 UT

Hi Robert,

I will update the page, but I need to make in a timely fashion to keep
things simple for Hank on the Allmand site. I can change anything here,
but I need Hank to update the page on the Allmand site to mirror this site.

-Lee

Of Robert Feeney
Sent: Sunday, April 27, 2008 5:33 PM
To: Allmand@googlegroups.com

Re: [Allmand] View this page "Owners"

bobfeene...@gmail.com (Robert Feeney) — Sun, 27 Apr 2008 21:33:22 UT

Lee: I am on the list but I have a new E-mail address: Bobfeene...@gmail.com.
How can I update my address? Thanks, BF
On Sun, Apr 27, 2008 at 3:06 PM, sailor...@gmail.com <sailor...@gmail.com>
wrote: