CAD file for Class Rules - B - measurement diagram
Bill Raff
Greetings!
I'm trying to find a CAD version of the 505 measurement diagrams showing the stations and shapes as seen on the official "Class Rules -B- measurement diagrams" It's a 3 page PDF
which I located on the International website. I tried to reverse engineer off the PDF but it doesn't seem to be all that accurate, for instance on the page 2 layout, the front view, station 7 measurement to center line does not coincide with the (lower) side view station 7 dimension to center line. I believe station 7 is also the maximum beam dimension.
Also the side view on page one does not scale the same as the page 2 side view.
If someone has some info on why this is a where I can find an accurate drawing I would appreciate it.
Happy New Year to all and here's to great sailing in 2010!!
Bill Raff The Green Craftsman, Inc. General Contractor Ca. Lic. # 933904 |
Stephen Long
Bill
Please send me your e-mail address and I can forward you what I have.
Cheers
Stephen Long
USA8821
Bubbles
--
You received this message because you are subscribed to the Google
Groups "505 USA West
Coast" group.
To post to this group, send email to 505-usa-wes...@googlegroups.com.
To unsubscribe from this group, send email to 505-usa-west-coas...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/505-usa-west-coast?hl=en.
John Billings
Bill,
I did a NURBS surface model of the hull in Autodesk Mechanical Desktop awhile back (from the data on the website). I can send that to you, possibly in IGES, depending on what you are using, it may be of use.
Happy New Year!
John Billings
USA 7201
AccessCE, Inc.
864 Grand Avenue, #545
San Diego, CA 92109
From: 505-usa-w...@googlegroups.com
[mailto:505-usa-w...@googlegroups.com] On Behalf Of Stephen Long
Sent: Thursday, December 31, 2009 8:34 AM
To: '505-usa-w...@googlegroups.com'
Subject: RE: [505-usa-west-coast] CAD file for Class Rules - B - measurement
diagram
Bill
Please send me your e-mail address and I can forward you what I have.
Cheers
Stephen Long
USA8821
Bubbles
From:
505-usa-w...@googlegroups.com [mailto:505-usa-w...@googlegroups.com]
On Behalf Of Bill Raff
Sent: Wednesday, December 30, 2009 4:32 PM
To: 505-usa-w...@googlegroups.com
Subject: [505-usa-west-coast] CAD file for Class Rules - B - measurement
diagram
|
Greetings!
I'm trying to find a CAD version of the 505 measurement
diagrams showing the stations and shapes as seen on the official
"Class Rules -B- measurement diagrams" It's a 3 page PDF
I tried to reverse engineer off the PDF but it doesn't seem to be all that accurate, for instance on the page 2 layout, the front view, station 7 measurement to center line does not coincide with the (lower) side view station 7 dimension to center line. I believe station 7 is also the maximum beam dimension.
Also the side view on page one does not scale the same as the page 2 side view.
If someone has some info on why this is a where I can find an accurate drawing I would appreciate it.
Happy New Year to all and here's to great sailing in 2010!!
Santa Fe Springs, CA 90670 General Contractor Ca. Lic. # 933904 |
--
You received this message because you are subscribed to the
Google Groups "505 USA West Coast" group.
To post to this group, send email to 505-usa-w...@googlegroups.com.
To unsubscribe from this group, send email to
505-usa-west-co...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/505-usa-west-coast?hl=en.
--
You received this message because you are subscribed to the
Google Groups "505 USA West Coast" group.
To post to this group, send email to 505-usa-w...@googlegroups.com.
To unsubscribe from this group, send email to
505-usa-west-co...@googlegroups.com.
Heidi and Paul Vongrey
If you are not familiar with "PT" (Port Townsend) check out some of the links. Absolutely incredible scenery from the beach just tops off the great sailing!
Here is a preliminary "Notice of Race" for the 2010 PCC's:
The Port Townsend Sailing Association is proud to announce that it will host the 2010 505 Pacific Coast Championship regatta in Port Townsend, Washington. The event will be held at Fort Worden State Park on Saturday, May 22 through Monday, May 24, 2010. (It is a Canadian holiday on Monday.)
Port Townsend is an historic seaport with a Victorian flavor, a vibrant waterfront, numerous restaurants and attractions for the whole family. It also offers good sailing and consistant breeze in May.(8-15 knots is typical) There are many inns, hotels, B&B's and camping options, but it is important to reserve early, as Port Townsend is a popular destination. For some of you, travel to Port Townsend will involve using the Washington State Ferry system, and here again, advanced reservations are a good idea.
Expect to see a dedicated website and links in the very near future. We look forward to throwing a great regatta and seeing you all here in PT!
If you can't wait to get more info you can reach Dan Ginther at 360 385-5188 or da...@mrjconstructors.com or Piper Dunlap at 360 774-0819, or piper...@gmail.com.
Check out these links to get a feel for the town.
- http://www.enjoypt.com/
- Here is the Port Townsend Chamber of Commerce website: ---- www.ptchamber.org
- And the Fort Worden State Park site:---- www.parks.wa.gov/fortworden
- City guide ---- http://www.ptguide.com/
- NOAA web site for the area. ----- http://www.ndbc.noaa.gov/data/Forecasts/FZUS56.KSEW.html
Mark Dowdy
John Billings
As I recall, there is some CAD templates available, I believe they were in some format that worked in AutoCAD, which is what I used to generate the surface model.
The station locations appeared to be in English units converted to metric. - John
AccessCE, Inc.
864 Grand Avenue, #545
San Diego, CA 92109
WitchCraft Boats, Inc.
Just out of curiousity, what are you planning on doing withe CAD plans? Are you boat building now? You've been rebuilding that old...Parker?
Geoff
--- On Thu, 12/31/09, John Billings <john.bi...@gmail.com> wrote:
Bill Raff
That sounds like it might be fairly accurate , when you have a chance I'd like to take a look at the IGES file you have.
Many thanks, |
Bill Raff The Green Craftsman, Inc. |
|
General Contractor Ca. Lic. # 933904 |
| --- On Thu, 12/31/09, John Billings <john.bi...@gmail.com> wrote: |
|
Date: Thursday, December 31, 2009, 11:50 AM |
|
|
|
|
|
|
Craig Thompson
iqc...@gmail.com