3d-building texture problems in Google Earth
120 views
Skip to first unread message
jiayi
Oct 22, 2009, 2:58:33 PM10/22/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hello everyonne!
I'm having problems with the 3d buildings layer. 3d building are
automatically loaded when I navigate to the area, but always with
uncompleted texture, like that of the terrain when loading.
http://picasaweb.google.com/lh/photo/ZvKsISBpbGgrsPuSNV0Vxw?feat=directlink
I tried to clear the cache. It didn't work.
Please, how could I fix this problem?
JiaYi
I'm having problems with the 3d buildings layer. 3d building are
automatically loaded when I navigate to the area, but always with
uncompleted texture, like that of the terrain when loading.
http://picasaweb.google.com/lh/photo/ZvKsISBpbGgrsPuSNV0Vxw?feat=directlink
I tried to clear the cache. It didn't work.
Please, how could I fix this problem?
JiaYi
bdhy
Oct 23, 2009, 2:11:00 AM10/23/09
to Map Your World - 3D Modeling for Google Earth & Maps
Bonjour, c'est certainement un problème de cache dans GE.
Il faut revoir la taille du cache.
Alors Lyon?
Bernard
On 22 oct, 20:58, jiayi <li.jiayi0...@gmail.com> wrote:
> Hello everyonne!
> I'm having problems with the 3d buildings layer. 3d building are
> automatically loaded when I navigate to the area, but always with
> uncompleted texture, like that of the terrain when loading.http://picasaweb.google.com/lh/photo/ZvKsISBpbGgrsPuSNV0Vxw?feat=dire...
Il faut revoir la taille du cache.
Alors Lyon?
Bernard
On 22 oct, 20:58, jiayi <li.jiayi0...@gmail.com> wrote:
> Hello everyonne!
> I'm having problems with the 3d buildings layer. 3d building are
> automatically loaded when I navigate to the area, but always with
SnowTiger
Oct 25, 2009, 4:46:35 PM10/25/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hello jiayi
I am unsure what is going on, but it appears to begin loading but just
not finish loading.
Next time to go to look at this model or any others, set your view
angle and distance (i.e. orbit/zoom in GE) and then leave the mouse
alone while the model(s) and textures load completely.
Experiment - Let us know the results >>
In case you weren't already aware, there is a small blue circle that
Swirls in the Bottom Right Corner of the GE Window/Screen while data
is still loading into GE. Any time you orbit or move to another
location or view in GE, you should see this swirl take place.
Make sure it has stopped loading all data and see if there is any
difference.
If it does stop loading and the textures are incomplete OR if the
swirl does not stop swirling then the problem will require additional
diagnosing. But the results of the above mentioned experiment may help
narrow down the issue(s).
PS> Please make sure GE and all your video drivers and windows updates
etc are all Up To Date.
Many problems are often attributed (and thus cured) by maintaining and
up-to-date computer (hardware and software).
Also please let us know how you make out.
I am unsure what is going on, but it appears to begin loading but just
not finish loading.
Next time to go to look at this model or any others, set your view
angle and distance (i.e. orbit/zoom in GE) and then leave the mouse
alone while the model(s) and textures load completely.
Experiment - Let us know the results >>
In case you weren't already aware, there is a small blue circle that
Swirls in the Bottom Right Corner of the GE Window/Screen while data
is still loading into GE. Any time you orbit or move to another
location or view in GE, you should see this swirl take place.
Make sure it has stopped loading all data and see if there is any
difference.
If it does stop loading and the textures are incomplete OR if the
swirl does not stop swirling then the problem will require additional
diagnosing. But the results of the above mentioned experiment may help
narrow down the issue(s).
PS> Please make sure GE and all your video drivers and windows updates
etc are all Up To Date.
Many problems are often attributed (and thus cured) by maintaining and
up-to-date computer (hardware and software).
Also please let us know how you make out.
jiayi
Oct 26, 2009, 1:14:10 PM10/26/09
to Map Your World - 3D Modeling for Google Earth & Maps
Bonjour Bernard,
J'ai 500 mo de mémoire et 2000 mo de disque dur attribués au GE. A mon
avis c'est suffisant...
J'ai déjà essayé de les vider, ça ne marche toujours pas.
Finalement j'ai pas fait le transfert. J'avais beaucoup hésité entre
info et électro parce qu'il n'y a pas un département qui comprend les
deux.
Le GE de Lyon (génie électrique, pas Google Earth :-) ) que j'avais
visé n'est en fait pas la même chose que le EII (Electronique et
Informatique industrielle) de Rennes.
C'est dommage que l'on ne peut plus modéliser la même ville.
Cordialement
Jia Yi
J'ai 500 mo de mémoire et 2000 mo de disque dur attribués au GE. A mon
avis c'est suffisant...
J'ai déjà essayé de les vider, ça ne marche toujours pas.
Finalement j'ai pas fait le transfert. J'avais beaucoup hésité entre
info et électro parce qu'il n'y a pas un département qui comprend les
deux.
Le GE de Lyon (génie électrique, pas Google Earth :-) ) que j'avais
visé n'est en fait pas la même chose que le EII (Electronique et
Informatique industrielle) de Rennes.
C'est dommage que l'on ne peut plus modéliser la même ville.
Cordialement
Jia Yi
jiayi
Oct 26, 2009, 1:40:41 PM10/26/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hello SnowTiger,
Thank you for your detailed explanation.
I tried as you said. The blue circle stopped and the textures are
incomplete.
It looks like GE does not have the access to full textures.....
By the way, Everything has its newest version, including Google
Chrome :-)
Jia Yi
Thank you for your detailed explanation.
I tried as you said. The blue circle stopped and the textures are
incomplete.
It looks like GE does not have the access to full textures.....
By the way, Everything has its newest version, including Google
Chrome :-)
Jia Yi
SnowTiger
Oct 27, 2009, 12:10:40 PM10/27/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hello again jiayi
I'm sorry to hear things aren't yet working properly for you.
Have you considered trying to re-install GE ? Or have you already done
that too ?
It does sound like something is interfering with GE, preventing it
from completing the texture loading.
I wonder if it could be anything to do with Anti-Virus software or a
firewall or the like ? Probably not, since you mentioned that the
circle stops swirling, indicating that GE has finished loading all the
visible models and textures.
That in itself might make re-installation of GE worth the time and
effort.
You could re-install directly over the existing OR uninstall first and
then re-install.
At least this is the order which I would attempt to correct this
issue.
Best of luck with it ... hopefully you will soon find a viable
solution.
IF/When you do find a working solution, I recommend you post that
solution so that others may benefit from it if they find they too are
experiencing similar issues.
I'm sorry to hear things aren't yet working properly for you.
Have you considered trying to re-install GE ? Or have you already done
that too ?
It does sound like something is interfering with GE, preventing it
from completing the texture loading.
I wonder if it could be anything to do with Anti-Virus software or a
firewall or the like ? Probably not, since you mentioned that the
circle stops swirling, indicating that GE has finished loading all the
visible models and textures.
That in itself might make re-installation of GE worth the time and
effort.
You could re-install directly over the existing OR uninstall first and
then re-install.
At least this is the order which I would attempt to correct this
issue.
Best of luck with it ... hopefully you will soon find a viable
solution.
IF/When you do find a working solution, I recommend you post that
solution so that others may benefit from it if they find they too are
experiencing similar issues.
jiayi
Oct 28, 2009, 4:23:55 AM10/28/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hi SnowTiger,
I re-installed GE. It still doesn't want to load complete textures,
neither the plugin for IE and Chorme.
What is strange, there are few Building Maker-made models in the 3d
layer well loaded. Otherwise, all models that are not in the layer
don't have the symptom.
I considered if it came from the server. But someone in the same
residence has his GE running well.
Thank you again for your patience. It was so nice.
I'll put my solution here if I manage to find one.
Jia Yi
I re-installed GE. It still doesn't want to load complete textures,
neither the plugin for IE and Chorme.
What is strange, there are few Building Maker-made models in the 3d
layer well loaded. Otherwise, all models that are not in the layer
don't have the symptom.
I considered if it came from the server. But someone in the same
residence has his GE running well.
Thank you again for your patience. It was so nice.
I'll put my solution here if I manage to find one.
Jia Yi
bdhy
Oct 28, 2009, 1:34:05 PM10/28/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hi,
I found ...... this is normal:
this is not the cache, neither GE .....
THESE ARE THE MODELS OF THE 3D WAREHOUSE:
http://sketchup.google.com/3dwarehouse/cldetails?mid=25e5682865abea5d...
http://sketchup.google.com/3dwarehouse/cldetails?mid=aa571b940fa2c6db...
:o))) Bernard
On 28 oct, 09:23, jiayi <li.jiayi0...@gmail.com> wrote:
> Salut SnowTiger,
>
> J'ai ré-installé GE. Il ne veut toujours pas à charger les textures complet,
> ni le plugin pour IE et Chorme.
> Ce qui est étrange et thé, il ya peu de construction fabriqués les modèles de la 3D
> couche bien chargé. Sinon, tous les modèles qui ne sont pas dans la couche
> n'ont pas le symptôme.
> Je considérais comme si elle venait à partir du serveur. Mais quelqu'un dans le même
> a sa résidence GE fonctionne bien.
>
> Merci encore pour votre patience. Il était si gentil.
> Je vais mettre ma solution ici, si je parviens à en trouver un.
>
> Jia Yi
>
> Le 27 Oct, 5:10 pm, SnowTiger <inspec...hometech.on.ca>a écrit:
>
>
>
>
>
> > Bonjour à nouveau Jiayi
>
> > Je suis désolé d'entendre les choses ne fonctionnent pas encore correctement pour vous.
>
> > Avez-vous pensé à essayer de ré-installer GE? Ou avez-vous déjà fait
> > Ça aussi?
>
> > Cela ressemble en quelque chose interfère avec GE, l'empêchant
> > De terminer le chargement de texture.
> > Je me demande si elle pourrait être quelque chose à voir avec l'anti-virus ou un
> > Pare-feu ou tout autre moyen? Probablement pas, puisque vous avez mentionné que le
> > Cercle cesse tourbillonnant, en indiquant que GE a fini de charger toutes les
> > Modèles visibles et les textures.
> > Ce qui pourrait en soi faire ré-installation de GE vaut le temps et
> > Effort.
>
> > Vous pouvez ré-installer directement sur le désinstaller ou existantes d'abord et
> > Puis ré-installer.
> > Au moins c'est l'ordre que je voudrais tenter de corriger ce
> > Question.
>
> > Best of luck with it ... j'espère que vous trouverez bientôt un État palestinien viable
> > Solution.
> > Si / quand vous ne trouvez une solution de travail, je vous recommande de poste qui
> > Une solution pour que d'autres mai en bénéficier s'ils trouvent qu'ils sont trop
> > Rencontrez des problèmes similaires.
I found ...... this is normal:
this is not the cache, neither GE .....
THESE ARE THE MODELS OF THE 3D WAREHOUSE:
http://sketchup.google.com/3dwarehouse/cldetails?mid=25e5682865abea5d...
http://sketchup.google.com/3dwarehouse/cldetails?mid=aa571b940fa2c6db...
:o))) Bernard
On 28 oct, 09:23, jiayi <li.jiayi0...@gmail.com> wrote:
> Salut SnowTiger,
>
> J'ai ré-installé GE. Il ne veut toujours pas à charger les textures complet,
> ni le plugin pour IE et Chorme.
> Ce qui est étrange et thé, il ya peu de construction fabriqués les modèles de la 3D
> couche bien chargé. Sinon, tous les modèles qui ne sont pas dans la couche
> n'ont pas le symptôme.
> Je considérais comme si elle venait à partir du serveur. Mais quelqu'un dans le même
> a sa résidence GE fonctionne bien.
>
> Merci encore pour votre patience. Il était si gentil.
> Je vais mettre ma solution ici, si je parviens à en trouver un.
>
> Jia Yi
>
> Le 27 Oct, 5:10 pm, SnowTiger <inspec...hometech.on.ca>a écrit:
>
>
>
>
>
> > Bonjour à nouveau Jiayi
>
> > Je suis désolé d'entendre les choses ne fonctionnent pas encore correctement pour vous.
>
> > Avez-vous pensé à essayer de ré-installer GE? Ou avez-vous déjà fait
> > Ça aussi?
>
> > Cela ressemble en quelque chose interfère avec GE, l'empêchant
> > De terminer le chargement de texture.
> > Je me demande si elle pourrait être quelque chose à voir avec l'anti-virus ou un
> > Pare-feu ou tout autre moyen? Probablement pas, puisque vous avez mentionné que le
> > Cercle cesse tourbillonnant, en indiquant que GE a fini de charger toutes les
> > Modèles visibles et les textures.
> > Ce qui pourrait en soi faire ré-installation de GE vaut le temps et
> > Effort.
>
> > Vous pouvez ré-installer directement sur le désinstaller ou existantes d'abord et
> > Puis ré-installer.
> > Au moins c'est l'ordre que je voudrais tenter de corriger ce
> > Question.
>
> > Best of luck with it ... j'espère que vous trouverez bientôt un État palestinien viable
> > Solution.
> > Si / quand vous ne trouvez une solution de travail, je vous recommande de poste qui
> > Une solution pour que d'autres mai en bénéficier s'ils trouvent qu'ils sont trop
> > Rencontrez des problèmes similaires.
bdhy
Oct 28, 2009, 1:43:53 PM10/28/09
to Map Your World - 3D Modeling for Google Earth & Maps
http://sketchup.google.com/3dwarehouse/cldetails?mid=25e5682865abea5d3acca2328265f220&ct=mdcc
http://sketchup.google.com/3dwarehouse/cldetails?mid=aa571b940fa2c6db5325556d0a59b783&ct=mdcc
Sorry ;o)
On 28 oct, 18:34, bdhy <sketchup.b...@gmail.com> wrote:
> Hi,
> I found ...... this is normal:
> this is not the cache, neither GE .....
> THESE ARE THE MODELS OF THE 3D WAREHOUSE:
>
> http://sketchup.google.com/3dwarehouse/cldetails?mid=25e5682865abea5d...http://sketchup.google.com/3dwarehouse/cldetails?mid=aa571b940fa2c6db...
http://sketchup.google.com/3dwarehouse/cldetails?mid=aa571b940fa2c6db5325556d0a59b783&ct=mdcc
Sorry ;o)
On 28 oct, 18:34, bdhy <sketchup.b...@gmail.com> wrote:
> Hi,
> I found ...... this is normal:
> this is not the cache, neither GE .....
> THESE ARE THE MODELS OF THE 3D WAREHOUSE:
>
SnowTiger
Oct 28, 2009, 4:22:16 PM10/28/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hi jiayi
I'm sorry to hear your issue has not yet been resolved although as
"bdhy" mentioned, there are many models (especially Building Maker
models) that are not textured all that well, giving the impression
that one has graphics problems.
On the other hand, I did a quick experiment myself today.
I aligned a view in a city with lots of buildings (in GE) and watched
the "swirling circle" to see when it was done loading data etc.
What I found was that while the swirling had stopped, there were quite
a few textures that had not yet been loaded. Although I waited for
maybe a full minute by the time the rest of the textures loaded and
came into focus, even after the swirling circle had stopped swirling.
Ultimately, this then proved to me that textures continue to load even
after GE indicates everything has loaded. Furthermore, those buildings
that have not been either modeled and/or textured well, never come
into focus due to the quality of the textures used.
Best of luck to you.
I'm sorry to hear your issue has not yet been resolved although as
"bdhy" mentioned, there are many models (especially Building Maker
models) that are not textured all that well, giving the impression
that one has graphics problems.
On the other hand, I did a quick experiment myself today.
I aligned a view in a city with lots of buildings (in GE) and watched
the "swirling circle" to see when it was done loading data etc.
What I found was that while the swirling had stopped, there were quite
a few textures that had not yet been loaded. Although I waited for
maybe a full minute by the time the rest of the textures loaded and
came into focus, even after the swirling circle had stopped swirling.
Ultimately, this then proved to me that textures continue to load even
after GE indicates everything has loaded. Furthermore, those buildings
that have not been either modeled and/or textured well, never come
into focus due to the quality of the textures used.
Best of luck to you.
jiayi
Oct 29, 2009, 1:05:07 PM10/29/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hi bdhy & SnowTiger
It is a good idea to create a collection like this. There are some
models which are, frankly speaking, not perfect enough to be accepted
in the 3d buildings layer.
Any way, this seems not to cause my problems. Please have a look at
this location on GE:
48° 7'18.72"N, 1°38'7.87"W
Here are some models that I made last year. But I can't just visualize
them myself (unless I download them separately). The image below is
what actually I get:
http://picasaweb.google.com/lh/photo/SjOjkG3GrfSjC27ErR94PQ?feat=directlink
If I clear the cache, keeping focusing on this location, I can see
terrains being competed and models being loaded. But everything stops
just before the last step, that textures will never be finished, even
if I wait for minutes. It is quite discouraging.
I've been having this problem since I changed a computer. I'm using
Windows 7 64bits. I don't know if Google has any difficulty with it.
Looks like Google Chrome goes very slow after about 1 hour's use.
Thanks again for being helping me.
JiaYi
It is a good idea to create a collection like this. There are some
models which are, frankly speaking, not perfect enough to be accepted
in the 3d buildings layer.
Any way, this seems not to cause my problems. Please have a look at
this location on GE:
48° 7'18.72"N, 1°38'7.87"W
Here are some models that I made last year. But I can't just visualize
them myself (unless I download them separately). The image below is
what actually I get:
http://picasaweb.google.com/lh/photo/SjOjkG3GrfSjC27ErR94PQ?feat=directlink
If I clear the cache, keeping focusing on this location, I can see
terrains being competed and models being loaded. But everything stops
just before the last step, that textures will never be finished, even
if I wait for minutes. It is quite discouraging.
I've been having this problem since I changed a computer. I'm using
Windows 7 64bits. I don't know if Google has any difficulty with it.
Looks like Google Chrome goes very slow after about 1 hour's use.
Thanks again for being helping me.
JiaYi
jiayi
Nov 13, 2009, 12:19:05 AM11/13/09
to Map Your World - 3D Modeling for Google Earth & Maps
Hello Everyone,
Problem solved!!!
In fact I just posted the same question in the Help forum. And I saw a
frequently-viewed question, and that's it !
May it help those who have the same problem！
http://www.google.com/support/forum/p/earth/thread?tid=07ac6ed2d01bd374&hl=en
by LuciaM :
Something else to try. Although this is not a permanent fix, it would
be very useful to know if it works.
Go to Start> Run> and type msconfig into the box. When the msconfig
dialog box appears, go to the "start" tab and select "extended
options". Tick "maximum memory" and enter 3000 MB. Accept the change
and then re-boot the PC. Then launch GE.
There was an issue with GE's data stream in 4.3, connected with large
RAM memory sizes. It was subsequently fixed but I'm wondering if
that's what is going on here once again.
L.
Problem solved!!!
In fact I just posted the same question in the Help forum. And I saw a
frequently-viewed question, and that's it !
May it help those who have the same problem！
http://www.google.com/support/forum/p/earth/thread?tid=07ac6ed2d01bd374&hl=en
by LuciaM :
Something else to try. Although this is not a permanent fix, it would
be very useful to know if it works.
Go to Start> Run> and type msconfig into the box. When the msconfig
dialog box appears, go to the "start" tab and select "extended
options". Tick "maximum memory" and enter 3000 MB. Accept the change
and then re-boot the PC. Then launch GE.
There was an issue with GE's data stream in 4.3, connected with large
RAM memory sizes. It was subsequently fixed but I'm wondering if
that's what is going on here once again.
L.
Reply all
Reply to author
Forward
0 new messages