SQLMail et Outlook 2003
francois
Après quelques diffcultées sur un serveur windows 2000, SQL Server 2000 j'ai
réussi à configurer SQLMail avec Outlook 2003 sur un serveur POP3
Les mails passent bien en mapi de SQLMail vers Outlook mais ne sont envoyé
que lorsque Outlook 2003 est démarré... c'est à dire quand SQLMail est
arrété sinon il ya conflit.
Est ce que quelqu'un à réussit à passer outre ce genre de soucis?
Eventuellement en utilisant une autre méthode?
Merci
Oliv'
Le pb de xp_sendmail c'est que cela se bloque souvent et peux être dur à
configurer dans certains cas.
Utilise plutot une procédure stockée à base de CDO qui va pointer sur un
server SMTP virtuel.
Celle ci est assez complte et permet de joindre des resultats de query.
Oliv'
if exists (select *
from sysobjects
where id = object_id(N'[dbo].[sp_SQLSMTPMail]')
and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[sp_SQLSMTPMail]
GO
SET QUOTED_IDENTIFIER OFF SET ANSI_NULLS ON
GO
Create Procedure dbo.sp_SQLSMTPMail
@vcTo varchar(2048) = null,
@vcBody varchar(8000) = '',
@vcSubject varchar(255) = null,
@vcAttachments varchar(1024) = null,
@vcQuery varchar(8000) = null,
@vcFrom varchar(128) = null,
@vcCC varchar(2048) = '',
@vcBCC varchar(2048) = '',
@vcSMTPServer varchar(255) = '192.9.100.1', -- put local network
smtp server name here
@cSendUsing char(1) = '2',
@vcPort varchar(3) = '25',
@cAuthenticate char(1) = '0',
@vcDSNOptions varchar(2) = '0',
@vcTimeout varchar(2) = '30',
@vcSenderName varchar(128) = null,
@vcServerName sysname = null
As
/*******************************************************************/
--Name : sp_SQLSMTPMail
--Server : Generic
--Description : SQL smtp e-mail using CDOSYS, OLE Automation and a
-- network smtp server; For SQL Servers running on
-- windows 2000.
--
--Note : Be sure to set the default for @vcSMTPServer above to
-- the company network smtp server or you will have to
-- pass it in each time.
--
--Comments : Getting the network SMTP configured to work properly
-- may require engaging your company network or
-- server people who deal with the netowrk SMTP server.
-- Some errors that the stored proc returns relate to
-- incorrect permissions for the various SQL Servers to
-- use the SMTP relay server to bouce out going mail.
-- Without proper permissions the SQL server appears as
-- a spammer to the local SMTP network server.
--
--Parameters : See the 'Syntax' Print statements below or call the
-- sp with '?' as the first input.
--
--Date : 08/22/2001
--Author : Clinton Herring
--
--History :
/*******************************************************************/
Set nocount on
-- Determine if the user requested syntax.
If @vcTo = '?'
Begin
Print 'Syntax for sp_SQLSMTPMail (based on CDOSYS):'
Print 'Exec master.dbo.sp_SQLSMTPMail'
Print ' @vcTo (varchar(2048)) - Recipient e-mail address
list separating each with a '';'' '
Print ' or a '',''. Use a ''?''
to return the syntax.'
Print ' @vcBody (varchar(8000)) - Text body; use embedded
char(13) + char(10)'
Print ' for carriage returns.
The default is nothing'
Print ' @vcSubject (varchar(255))) - E-mail subject. The
default is a message from'
Print ' @@servername.'
Print ' @vcAttachments (varchar(1024)) - Attachment list
separating each with a '';''.'
Print ' The default is no
attachments.'
Print ' @vcQuery (varchar(8000)) - In-line query or a query
file path; do not '
Print ' use double quotes within
the query.'
Print ' @vcFrom (varchar(128)) - Sender list defaulted to
@@ServerName.'
Print ' @vcCC (varchar(2048)) - CC list separating each
with a '';'' or a '','''
Print ' The default is no CC
addresses.'
Print ' @vcBCC (varchar(2048)) - Blind CC list separating
each with a '';'' or a '','''
Print ' The default is no BCC
addresses.'
Print ' @vcSMTPServer (varchar(255)) - Network smtp server
defaulted to your companies network'
Print ' smtp server. Set this in
the stored proc code.'
Print ' @cSendUsing (char(1)) - Specifies the smpt server
method, local or network. The'
Print ' default is network, a
value of ''2''.'
Print ' @vcPort (varchar(3)) - The smtp server
communication port defaulted to ''25''.'
Print ' @cAuthenticate (char(1)) - The smtp server
authentication method defaulted to '
Print ' anonymous, a value of
''0''.'
Print ' @vcDSNOptions (varchar(2)) - The smtp server delivery
status defaulted to none,'
Print ' a value of ''0''.'
Print ' @vcTimeout (varchar(2)) - The smtp server
connection timeout defaulted to 30 seconds.'
Print ' @vcSenderName (varchar(128)) - Primary sender name
defaulted to @@ServerName.'
Print ' @vcServerName (sysname) - SQL Server to which the
query is directed defaulted'
Print ' to @@ServerName.'
Print ''
Print ''
Print 'Example:'
Print 'sp_SQLSMTPMail ''<us...@mycompany.com>'', ''This is a test'',
@vcSMTPServer = <network smtp relay server>'
Print ''
Print 'The above example will send an smpt e-mail to
<us...@mycompany.com> from @@ServerName'
Print 'with a subject of ''Message from SQL Server <@@ServerName>''
and a'
Print 'text body of ''This is a test'' using the network smtp server
specified.'
Print 'See the MSDN online library, Messaging and Collaboration, at '
Print 'http://www.msdn.microsoft.com/library/ for details about
CDOSYS.'
Print 'subheadings: Messaging and Collaboration>Collaboration Data
Objects>CDO for Windows 2000>'
Print
'Reference>Fields>http://schemas.microsoft.com/cdo/configuration/>smtpserver
field'
Print ''
Print 'Be sure to set the default for @vcSMTPServer before compiling
this stored procedure.'
Print ''
Return
End
-- Declare variables
Declare @iMessageObjId int
Declare @iHr int
Declare @iRtn int
Declare @iFileExists tinyint
Declare @vcCmd varchar(255)
Declare @vcQueryOutPath varchar(50)
Declare @dtDatetime datetime
Declare @vcErrMssg varchar(255)
Declare @vcAttachment varchar(1024)
Declare @iPos int
Declare @vcErrSource varchar(255)
Declare @vcErrDescription varchar(255)
-- Set local variables.
Set @dtDatetime = getdate()
Set @iHr = 0
-- Check for minimum parameters.
If @vcTo is null
Begin
Set @vcErrMssg = 'You must supply at least 1 recipient.'
Goto ErrMssg
End
-- CDOSYS uses commas to separate recipients. Allow users to use
-- either a comma or a semi-colon by replacing semi-colons in the
-- To, CCs and BCCs.
Select @vcTo = Replace(@vcTo, ';', ',')
Select @vcCC = Replace(@vcCC, ';', ',')
Select @vcBCC = Replace(@vcBCC, ';', ',')
-- Set the default SQL Server to the local SQL Server if one
-- is not provided to accommodate instances in SQL 2000.
If @vcServerName is null
Set @vcServerName = @@servername
-- Set a default "subject" if one is not provided.
If @vcSubject is null
Set @vcSubject = 'Message from SQL Server ' + @vcServerName
-- Set a default "from" if one is not provided.
If @vcFrom is null
Set @vcFrom = 'SQL-' + Replace(@vcServerName,'\','_')
-- Set a default "sender name" if one is not provided.
If @vcSenderName is null
Set @vcSenderName = 'SQL-' + Replace(@vcServerName,'\','_')
-- Create the SMTP message object.
EXEC @iHr = sp_OACreate 'CDO.Message', @iMessageObjId OUT
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error creating object CDO.Message.'
Goto ErrMssg
End
-- Set SMTP message object parameters.
-- To
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'To', @vcTo
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "To".'
Goto ErrMssg
End
-- Subject
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'Subject', @vcSubject
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "Subject".'
Goto ErrMssg
End
-- From
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'From', @vcFrom
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "From".'
Goto ErrMssg
End
-- CC
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'CC', @vcCC
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "CC".'
Goto ErrMssg
End
-- BCC
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'BCC', @vcBCC
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "BCC".'
Goto ErrMssg
End
-- DSNOptions
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'DSNOptions', @vcDSNOptions
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "DSNOptions".'
Goto ErrMssg
End
-- Sender
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'Sender', @vcSenderName
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "Sender".'
Goto ErrMssg
End
-- Is there a query to run?
If @vcQuery is not null and @vcQuery <> ''
Begin
-- We have a query result to include; temporarily send the output to
the
-- drive with the most free space. Use xp_fixeddrives to determine
this.
-- If a temp table exists with the following name drop it.
If (Select object_id('tempdb.dbo.#fixeddrives')) > 0
Exec ('Drop table #fixeddrives')
-- Create a temp table to work with xp_fixeddrives.
Create table #fixeddrives(
Drive char(1) null,
FreeSpace varchar(15) null)
-- Get the fixeddrive info.
Insert into #fixeddrives Exec master.dbo.xp_fixeddrives
-- Get the drive letter of the drive with the most free space
-- Note: The OSQL output file name must be unique for each call within
the same session.
-- Apparently OSQL does not release its lock on the first file
created until the session ends.
-- Hence this alleviates a problem with queries from multiple
calls in a cursor or other loop.
Select @vcQueryOutPath = Drive + ':\TempQueryOut' +
ltrim(str(datepart(hh,getdate()))) +
ltrim(str(datepart(mi,getdate()))) +
ltrim(str(datepart(ss,getdate()))) +
ltrim(str(datepart(ms,getdate()))) + '.txt'
from #fixeddrives
where FreeSpace = (select max(FreeSpace) from #fixeddrives )
-- Check for a pattern of '\\*\' or '?:\'.
-- If found assume the query is a file path.
If Left(@vcQuery, 35) like '\\%\%' or Left(@vcQuery, 5) like '_:\%'
Begin
Select @vcCmd = 'osql /S' + @vcServerName + ' /E /i' +
convert(varchar(1024),@vcQuery) +
' /o' + @vcQueryOutPath + ' -n -w5000 '
End
Else
Begin
Select @vcCmd = 'osql /S' + @vcServerName + ' /E /Q"' + @vcQuery
+
'" /o' + @vcQueryOutPath + ' -n -w5000 '
End
Print @vcCmd
-- Execute the query
Exec master.dbo.xp_cmdshell @vcCmd, no_output
-- Add the query results as an attachment if the file was successfully
created.
-- Check to see if the file exists. Use xp_fileexist to determine
this.
-- If a temp table exists with the following name drop it.
If (Select object_id('tempdb.dbo.#fileexists')) > 0
Exec ('Drop table #fileexists')
-- Create a temp table to work with xp_fileexist.
Create table #fileexists(
FileExists tinyint null,
FileIsDirectory tinyint null,
ParentDirectoryExists tinyint null)
-- Execute xp_fileexist
Insert into #fileexists exec master.dbo.xp_fileexist @vcQueryOutPath
-- Now see if we need to add the file as an attachment
If (select FileExists from #fileexists) = 1
Begin
-- Set a variable for later use to delete the file.
Select @iFileExists = 1
-- Add the file path to the attachment variable.
If @vcAttachments is null
Select @vcAttachments = @vcQueryOutPath
Else
Select @vcAttachments = @vcAttachments + '; ' +
@vcQueryOutPath
End
End
-- Check for multiple attachments separated by a semi-colon ';'.
If @vcAttachments is not null
Begin
If right(@vcAttachments,1) <> ';'
Select @vcAttachments = @vcAttachments + '; '
Select @iPos = CharIndex(';', @vcAttachments, 1)
While @iPos > 0
Begin
Select @vcAttachment = ltrim(rtrim(substring(@vcAttachments, 1,
@iPos -1)))
Select @vcAttachments = substring(@vcAttachments, @iPos + 1,
Len(@vcAttachments)-@iPos)
EXEC @iHr = sp_OAMethod @iMessageObjId, 'AddAttachment', @iRtn
Out, @vcAttachment
IF @iHr <> 0
Begin
EXEC sp_OAGetErrorInfo @iMessageObjId, @vcErrSource Out,
@vcErrDescription Out
Select @vcBody = @vcBody + char(13) + char(10) + char(13)
+ char(10) +
char(13) + char(10) + 'Error adding
attachment: ' +
char(13) + char(10) + @vcErrSource +
char(13) + char(10) +
@vcAttachment
End
Select @iPos = CharIndex(';', @vcAttachments, 1)
End
End
-- TextBody
EXEC @iHr = sp_OASetProperty @iMessageObjId, 'TextBody', @vcBody
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message parameter "TextBody".'
Goto ErrMssg
End
-- Other Message parameters for reference
--EXEC @iHr = sp_OASetProperty @iMessageObjId, 'MimeFormatted', False
--EXEC @iHr = sp_OASetProperty @iMessageObjId, 'AutoGenerateTextBody', False
--EXEC @iHr = sp_OASetProperty @iMessageObjId, 'MDNRequested', True
-- Set SMTP Message configuration property values.
-- Network SMTP Server location
EXEC @iHr = sp_OASetProperty @iMessageObjId,
'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value',
@vcSMTPServer
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message configuraton field
"smtpserver".'
Goto ErrMssg
End
-- Sendusing
EXEC @iHr = sp_OASetProperty @iMessageObjId,
'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value',
@cSendUsing
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message configuraton field
"sendusing".'
Goto ErrMssg
End
-- SMTPConnectionTimeout
EXEC @iHr = sp_OASetProperty @iMessageObjId,
'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SMTPConnectionTimeout").Value',
@vcTimeout
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message configuraton field
"SMTPConnectionTimeout".'
Goto ErrMssg
End
-- SMTPServerPort
EXEC @iHr = sp_OASetProperty @iMessageObjId,
'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SMTPServerPort").Value',
@vcPort
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message configuraton field
"SMTPServerPort".'
Goto ErrMssg
End
-- SMTPAuthenticate
EXEC @iHr = sp_OASetProperty @iMessageObjId,
'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SMTPAuthenticate").Value',
@cAuthenticate
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error setting Message configuraton field
"SMTPAuthenticate".'
Goto ErrMssg
End
-- Other Message Configuration fields for reference
--EXEC @iHr = sp_OASetProperty @iMessageObjId,
--'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SMTPUseSSL").Value',True
--EXEC @iHr = sp_OASetProperty @iMessageObjId,
--'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/LanguageCode").Value','en'
--EXEC @iHr = sp_OASetProperty @iMessageObjId,
--'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SendEmailAddress").Value',
'Test User'
--EXEC @iHr = sp_OASetProperty @iMessageObjId,
--'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SendUserName").Value',null
--EXEC @iHr = sp_OASetProperty @iMessageObjId,
--'Configuration.Fields("http://schemas.microsoft.com/cdo/configuration/SendPassword").Value',null
-- Update the Message object fields and configuration fields.
EXEC @iHr = sp_OAMethod @iMessageObjId, 'Configuration.Fields.Update'
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error updating Message configuration fields.'
Goto ErrMssg
End
EXEC @iHr = sp_OAMethod @iMessageObjId, 'Fields.Update'
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error updating Message parameters.'
Goto ErrMssg
End
-- Send the message.
EXEC @iHr = sp_OAMethod @iMessageObjId, 'Send'
IF @iHr <> 0
Begin
Set @vcErrMssg = 'Error Sending e-mail.'
Goto ErrMssg
End
Else
Print 'Mail sent.'
Cleanup:
-- Destroy the object and return.
EXEC @iHr = sp_OADestroy @iMessageObjId
--EXEC @iHr = sp_OAStop
-- Delete the query output file if one exists.
If @iFileExists = 1
Begin
Select @vcCmd = 'del ' + @vcQueryOutPath
Exec master.dbo.xp_cmdshell @vcCmd, no_output
End
Return
ErrMssg:
Begin
Print @vcErrMssg
If @iHr <> 0
Begin
EXEC sp_OAGetErrorInfo @iMessageObjId, @vcErrSource Out,
@vcErrDescription Out
Print @vcErrSource
Print @vcErrDescription
End
-- Determine whether to exist or go to Cleanup.
If @vcErrMssg = 'Error creating object CDO.Message.'
Return
Else
Goto Cleanup
End
Go
Grant Execute on dbo.sp_SQLSMTPMail to Public
Go
"francois" <nos...@baviere.net> a écrit dans le message de news:
uCkRFLOF...@tk2msftngp13.phx.gbl...
Med Bouchenafa
gratuitement ici
http://www.sqldev.net/xp/xpsmtp.htm
--
Bien cordialement
Med Bouchenafa
"francois" <nos...@baviere.net> a écrit dans le message de news:
uCkRFLOF...@tk2msftngp13.phx.gbl...
Pierre Goiffon
> Après quelques diffcultées sur un serveur windows 2000, SQL Server 2000 j'ai
> réussi à configurer SQLMail avec Outlook 2003 sur un serveur POP3
>
> Les mails passent bien en mapi de SQLMail vers Outlook mais ne sont envoyé
> que lorsque Outlook 2003 est démarré... c'est à dire quand SQLMail est
> arrété sinon il ya conflit.
Est-ce que votre Outlook ne serait pas en un mode différent de "internet
uniquement" ?
Il y a quelques années j'en avais bavé (comme tout le monde vous me
direz) pour installer et configurer SQL Mail, le thread est toujours
dans Google Groups. Je vous encourage donc à lire :
<http://www.google.fr/groups?q=g:thl4241001150d&dq=&hl=fr&lr=&c2coff=1&selm=a33nuv%2448f%241%40reader1.imaginet.fr>
Et les messages suivants, par exemple :
<http://www.google.fr/groups?q=g:thl1443890620d&dq=&hl=fr&lr=&c2coff=1&selm=a368dm%24lon%241%40reader1.imaginet.fr>
Bon courage !
francois
J'avais bien lu ces news mais je n'ai pas trouvé la fonction "groupe de
travail/ société" dans outlook... d'apres ce que j'ai compris elle n'existe
plus dans outlook 2003...
d'ou ma question... est ce que cela fonctionne?
"Pierre Goiffon" <pgoi...@invalid.fr> a écrit dans le message de news:
4215b35e$0$12446$626a...@news.free.fr...
Pierre Goiffon
>>Il y a quelques années j'en avais bavé (comme tout le monde vous me direz)
>>pour installer et configurer SQL Mail, le thread est toujours dans Google
>>Groups.
>
> travail/ société" dans outlook... d'apres ce que j'ai compris elle n'existe
> plus dans outlook 2003...
> d'ou ma question... est ce que cela fonctionne?
A l'époque c'était un Outlook 2000 qui était utilisé, et après ces
quelques difficultés de mise en place ça a très bien fonctionné pendant
un long moment
Pour Outlook 2003, la procédure diffère peut être... Désolé, pas de
réponse complémentaire à vous apporter. Bon courage !